Items 1- 32 of 338 total

1/2" Drive Stud Remover 1/2" Drive Stud Remover
Online
$33.18 for 1
Retail $65.50
Mfr PN: S-60E
Stock: 0
1/2" Drive Ratchet. 1/2" Drive Stud Remover. Manufactured by: Williams, a JH Williams Company..

This item usually ships within a few days but may take up to 4 weeks in rare occasions.

Online
$33.18 for 1
Retail $65.50
Mfr PN: S-60E
Stock: 0

5-PIECE SCREW EXTRACTOR SET 5-PIECE SCREW EXTRACTOR SET
Online
$54.56 for Each
Retail $68.20
Mfr PN: RNSE5
Stock: 180
Rennsteig Screw Extractor Set: Includes 5 sizes, #1 - #5 in plastic pouch. Unscrews ruined screws and bolts without damaging threads. Unique design allows both left and right handed turning. Made of hardened chrome vanadium steel. Made in Germany.
Online
$54.56 for Each
Retail $68.20
Mfr PN: RNSE5
Stock: 180

5 Piece Bolt-Grip Base Set 5 Piece Bolt-Grip Base Set
Online
$24.65 for EA
Retail $24.59
Mfr PN: 394001
Stock: 72
Five-piece base set is made of high carbon steel. Reverse spiral flutes are designed to bite down to provide maximum gripping power. Universal lobular design fits all types of fasteners. 3/8" square drive for use with hand ratchets, impact wrenches, air r atchets, hexagonal flats for use with flat wrench, pliers, adjustable wrench, sockets or VISE-GRIP locking pliers. Includes one each: 3/8", 7/16"(11mm), 1/2", 9/16"(14mm), and 5/8" (16mm). This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$24.65 for EA
Retail $24.59
Mfr PN: 394001
Stock: 72

Collet 7/16"-20 Collet 7/16"-20
Online
$25.94 for 1
Retail $47.80
Mfr PN: 87062
Stock: 0
Stud & Pipe Nipple Remover & Installers. Collet 7/16"-20. Manufactured by: Williams, a JH Williams Company..

This item usually ships within a few days but may take up to 4 weeks in rare occasions.

Online
$25.94 for 1
Retail $47.80
Mfr PN: 87062
Stock: 0

32R12-1 SPRING TOOL COMBO SET 32R12-1 SPRING TOOL COMBO SET
Online
$9.21 for 1 EA
Retail $11.99
Mfr PN: 32R12-1
Stock: 178
SPRING TOOL COMBINATION NAIL SETS Ideal for setting & countersinking nails & brads Tool has a different sized nail set on each end For professional painters & finish carpenters Tool fixes "shiners" - when nail gun fails to- drive brad below the surface of the wood Carded 32R12-1 SPRING TOOL COMBO SET SIZE:1/32 & 2/32"
Online
$9.21 for 1 EA
Retail $11.99
Mfr PN: 32R12-1
Stock: 178

Hanson 537 Spiral Flute Screw Extractor and Drill Bit, NO 1 Standard Shank, High Speed Steel Hanson 537 Spiral Flute Screw Extractor and Drill Bit, NO 1 Standard Shank, High Speed Steel
Online
$2.96 for EA
Retail $4.49
Mfr PN: 53701
Stock: 161
Extractor is packaged with the correct drill bit size. Aggressive left-hand spiral design provides extra ripping power. High speed steel drill bit ensures fast, clean drilling. Extractor size and recommended drill bit size are etched on each extractor. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$2.96 for EA
Retail $4.49
Mfr PN: 53701
Stock: 161

Irwin Industrial 8344 Hanson Plug Taps, High Carbon Steel, 12mm-1.75 Inch Irwin Industrial 8344 Hanson Plug Taps, High Carbon Steel, 12mm-1.75 Inch
Online
$6.06 for CD
Retail $7.45
Mfr PN: 8344
Stock: 104
Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading wher e high accuracy and tolerance thread is not critical. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$6.06 for CD
Retail $7.45
Mfr PN: 8344
Stock: 104

Stud Remover/Installer Set Stud Remover/Installer Set
Online
$409.81 for 1
Retail $808.85
Mfr PN: 87032
Stock: 0
Pullers, Sets. Stud Remover/Installer Set. Manufactured by: Williams, a JH Williams Company..

This item usually ships within a few days but may take up to 4 weeks in rare occasions.

Online
$409.81 for 1
Retail $808.85
Mfr PN: 87032
Stock: 0

Collet 5/16"-18 Collet 5/16"-18
Online
$25.94 for 1
Retail $47.80
Mfr PN: 87057
Stock: 0
Stud & Pipe Nipple Remover & Installers. Collet 5/16"-18. Manufactured by: Williams, a JH Williams Company..

This item usually ships within a few days but may take up to 4 weeks in rare occasions.

Online
$25.94 for 1
Retail $47.80
Mfr PN: 87057
Stock: 0

Set-Up Wedge, 6" Set-Up Wedge, 6"
Online
$11.33 for 1
Retail $19.40
Mfr PN: WG-6
Stock: 0
Miscellaneous Trades Tools. Set-Up Wedge, 6". Manufactured by: Williams, a JH Williams Company..

This item usually ships within a few days but may take up to 4 weeks in rare occasions.

Online
$11.33 for 1
Retail $19.40
Mfr PN: WG-6
Stock: 0

Non-Insulated Terminal Die Only Non-Insulated Terminal Die Only
Online
$13.95 for Each
Retail $19.54
Mfr PN: 54493
Stock: 16
Non-Insulated Terminal Die Only - Our world-famous Wire Crimper Tools save you time and energy.

Non-Insulated Terminal Die Only features include:

  • Non-Insulated Terminal Die Set for #22 - #8 Awg
  • Order Qty of 1 = 1 Piece

Below is more info on our Non-Insulated Terminal Die Only

Description: Non-insulated Terminal die only
Box Qty: 1
Case Qty: - This item does not ship to APO/FPO addresses.
Online
$13.95 for Each
Retail $19.54
Mfr PN: 54493
Stock: 16

Fractionl Tap&Hex Die Set 24 Piece Fractionl Tap&Hex Die Set 24 Piece
Online
$85.17 for SET
Retail $93.35
Mfr PN: 24614
Stock: 29
Set contains fractional plug tap and 1" hexagon dies in sizes: 1/4" - 20 NC, 1/4" - 28 NF, 5/16" - 18 NC, 5/16" - 24 NF, 3/8" - 16 NC, 3/8" - 24 NF, 7/16" - 14 NC, 7/16" - 20 NF, 1/2" - 13 NC, 1/2" - 20 NF. Pipe thread plug tap and 1" hexagon dies in size s: 1/8" - 27 NPT. Threading tools: plain die stock, 1" dies, offset adjustable tap wrench No. 0 to 1/2" and plastic case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$85.17 for SET
Retail $93.35
Mfr PN: 24614
Stock: 29

Hanson 8120 Fractional Plug Tap, 1/4-20 NC, High Carbon Steel Hanson 8120 Fractional Plug Tap, 1/4-20 NC, High Carbon Steel
Online
$3.05 for CD
Retail $4.15
Mfr PN: 8120
Stock: 370
Four straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$3.05 for CD
Retail $4.15
Mfr PN: 8120
Stock: 370

IRWIN FRACTIONAL PLUG TAP 10 - 24 NC IRWIN FRACTIONAL PLUG TAP 10 - 24 NC
Online
$35.28 for 14 Each
Retail $52.92
Mfr PN: 1128ZR
Stock: 0
IRWIN Tools High Carbon Steel Machine Screw Plug Taps feature precision ground straight flutes for rapid chip removal for efficient threading. Produce a class 2B thread. Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical | Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical | Straight flutes are ground to provide rapid chip removal for efficient threading | Designed for hand threading work in a variety of materials | Taps produce a class 2B thread
Online
$35.28 for 14 Each
Retail $52.92
Mfr PN: 1128ZR
Stock: 0

Irwin Industrial 8343 Hanson Plug Taps, High Carbon Steel, 12mm-1.50 Inch Irwin Industrial 8343 Hanson Plug Taps, High Carbon Steel, 12mm-1.50 Inch
Online
$6.07 for CD
Retail $7.45
Mfr PN: 8343
Stock: 27
METRIC THREAD SIZE Size In=12mm-1.50Flutes=4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$6.07 for CD
Retail $7.45
Mfr PN: 8343
Stock: 27

HeliCoil 5521-4 Thread Repair Kit, 1/4-20 X 0.35 in HeliCoil 5521-4 Thread Repair Kit, 1/4-20 X 0.35 in
Online
$18.70 for CD
Retail $25.39
Mfr PN: 5521-4
Stock: 23
Quickly and permanently restores stripped, worn or damaged threads to their original size and condition. The hard, stainless steel (18-8) diamond shaped wire inserts work in just about any part or material; aluminum, magnesium, cast iron, bronze, etc. The insert has a driving "tang" for installation which is notched for easy removal. Kit contains a Heli-Coil tap, installation tool, a quantity of inserts and detailed instructions, packaged in durable placon or vinyl pouches. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$18.70 for CD
Retail $25.39
Mfr PN: 5521-4
Stock: 23

SE5C SCREW EXTRACTOR SE5C SCREW EXTRACTOR
Online
$6.98 for 1 EA
Retail $8.99
Mfr PN: SE5C
Stock: 0
SCREW EXTRACTOR SET 5 pc. asst in pouch Made from chrome vanadium steel Lifetime warranty SE5C SCREW EXTRACTOR
Online
$6.98 for 1 EA
Retail $8.99
Mfr PN: SE5C
Stock: 0

8203 1/4-18 HANSON PIPE TAP 8203 1/4-18 HANSON PIPE TAP
Online
$6.25 for 1 EA
Retail $8.99
Mfr PN: 8203
Stock: 6
HANSON PIPE TAPS High carbon steel taper pipe taps Cut internal threads in pipes Nominal tap size is fitting being tapped Ideal for pipe fittings Tapered at a rate of 3/4" per foot 8203 1/4-18 HANSON PIPE TAP SIZE:1/4"-18NPT FLUTES:4Carded
Online
$6.25 for 1 EA
Retail $8.99
Mfr PN: 8203
Stock: 6

GRABIT SCREW EXTRACTOR SET GRABIT SCREW EXTRACTOR SET
Online
$25.28 for Each
Retail $29.50
Mfr PN: BO17001
Stock: 32
Boa Grabit Screw & Bolt Extractors: Easily removes damaged screws and bolts using standard power drills and quick change chucks as well as common wrenches and deep sockets. Removes screws (no. 6-10, 12-14) and bolts (1/8" - 5/16") and other fasteners. Made from hardened steel. Two piece set. Made in the U.K.
Online
$25.28 for Each
Retail $29.50
Mfr PN: BO17001
Stock: 32

Hanson 535/524 Screw Extractor Set, 5 Pieces Hanson 535/524 Screw Extractor Set, 5 Pieces
Online
$11.37 for EA
Retail $14.35
Mfr PN: 53535
Stock: 370
For removing broken screws and bolts. Left hand spiral, tapered flute. Correct drill size stamped on each screw extractor. Eliminates redrilling and retapping for a larger screw. One each: EX1, EX2, EX3, EX4, EX5, in plastic pouch. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$11.37 for EA
Retail $14.35
Mfr PN: 53535
Stock: 370

PIPE TAP 1/2-14 PIPE TAP 1/2-14
Online
$15.24 for Each
Retail $22.86
Mfr PN: 20400
Stock: 2
Online
$15.24 for Each
Retail $22.86
Mfr PN: 20400
Stock: 2

Metric Tap & Hex Die Set 24 Piece Metric Tap & Hex Die Set 24 Piece
Online
$82.97 for SET
Retail $90.95
Mfr PN: 26313
Stock: 37
Set contains metric plug tap and 1" hexagon dies in sizes: 3mm - 0.50, 4mm - 0.70, 5mm - 0.80, 6mm - 1.00, 7mm - 1.00, 8mm - 1.25, 9mm 1.25, 10mm - 1.50, 12mm - 1.50, 12mm - 1.75. Pipe thread plug tap and 1" hexagon dies in sizes: 1/8" - 28 BSP. Threadin g tools: plain die stock, 1" dies, offset adjustable tap wrench, taps No. 0 to 1/2" and plastic case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$82.97 for SET
Retail $90.95
Mfr PN: 26313
Stock: 37

12 Piece Tap/Die Set 12 Piece Tap/Die Set
Online
$30.40 for SET
Retail $30.35
Mfr PN: 24605
Stock: 32
One each tap/5/8" die 6-32 NC, 8-32 NC, 10-24 NC, 10-32 NF 1/4-20 NC, 12457 plain die stock, 5/8" hex, No. 12401 T-Handle tap wrench. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$30.40 for SET
Retail $30.35
Mfr PN: 24605
Stock: 32

PIPE TAP 3/4-14 PIPE TAP 3/4-14
Online
$20.01 for Each
Retail $30.02
Mfr PN: 20400
Stock: 0
Online
$20.01 for Each
Retail $30.02
Mfr PN: 20400
Stock: 0

Collet 3/8"-24 Collet 3/8"-24
Online
$25.94 for 1
Retail $47.80
Mfr PN: 87060
Stock: 0
Stud & Pipe Nipple Remover & Installers. Collet 3/8"-24. Manufactured by: Williams, a JH Williams Company..

This item usually ships within a few days but may take up to 4 weeks in rare occasions.

Online
$25.94 for 1
Retail $47.80
Mfr PN: 87060
Stock: 0

Collet 1/4"-20 Collet 1/4"-20
Online
$25.94 for 1
Retail $47.80
Mfr PN: 87055
Stock: 0
Stud & Pipe Nipple Remover & Installers. Collet 1/4"-20. Manufactured by: Williams, a JH Williams Company..

This item usually ships within a few days but may take up to 4 weeks in rare occasions.

Online
$25.94 for 1
Retail $47.80
Mfr PN: 87055
Stock: 0

Collet 1/2"-20 Collet 1/2"-20
Online
$25.94 for 1
Retail $47.80
Mfr PN: 87064
Stock: 0
Stud & Pipe Nipple Remover & Installers. Collet 1/2"-20. Manufactured by: Williams, a JH Williams Company..

This item usually ships within a few days but may take up to 4 weeks in rare occasions.

Online
$25.94 for 1
Retail $47.80
Mfr PN: 87064
Stock: 0

Hanson 1759ZR Straight Flute Plug Tap, M18 x 1.5 Metric, High Carbon Steel Hanson 1759ZR Straight Flute Plug Tap, M18 x 1.5 Metric, High Carbon Steel
Online
$10.18 for EA
Retail $12.79
Mfr PN: 1759ZR
Stock: 580
Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading wher e high accuracy and tolerance thread is not critical. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$10.18 for EA
Retail $12.79
Mfr PN: 1759ZR
Stock: 580

Hanson 1791177 Fractional Self-Aligning Bottom Tap, 5/16-24 NF, High Carbon Steel Hanson 1791177 Fractional Self-Aligning Bottom Tap, 5/16-24 NF, High Carbon Steel
Online
$3.24 for CD
Retail $4.25
Mfr PN: 1791177
Stock: 522
High carbon steel self aligning taps, ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is needed. Used for hand threading work in a variety of materials; produces class 2B thread. Tap size and recomme nded drill bit size is laser etched on each tool for easy identification. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$3.24 for CD
Retail $4.25
Mfr PN: 1791177
Stock: 522

Hanson 537 Spiral Flute Screw Extractor and Drill Bit, NO 2 Standard Shank, High Speed Steel Hanson 537 Spiral Flute Screw Extractor and Drill Bit, NO 2 Standard Shank, High Speed Steel
Online
$3.11 for EA
Retail $4.75
Mfr PN: 53702
Stock: 240
Extractor is packaged with the correct drill bit size. Aggressive left-hand spiral design provides extra ripping power. High speed steel drill bit ensures fast, clean drilling. Extractor size and recommended drill bit size are etched on each extractor. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$3.11 for EA
Retail $4.75
Mfr PN: 53702
Stock: 240

Mintcraft T1703L Tub Drain Remover Tool Mintcraft T1703L Tub Drain Remover Tool
Online
$8.44 for BAG
Retail $11.75
Mfr PN: T1703L
Stock: 233
Installs and removes tub drains and closet spuds. Fits most tub drains and 1-1/2" to 2" closet spuds. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$8.44 for BAG
Retail $11.75
Mfr PN: T1703L
Stock: 233

Hanson 534/524 Spiral Flute Screw Extractor, NO 1 Standard Shank, Tool Steel Hanson 534/524 Spiral Flute Screw Extractor, NO 1 Standard Shank, Tool Steel
Online
$2.11 for CD
Retail $3.29
Mfr PN: 53401
Stock: 224
Removes broken studs, bolts, socket screws and fittings. Aggressive left hand spiral for extra gripping power. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$2.11 for CD
Retail $3.29
Mfr PN: 53401
Stock: 224