11390 14OZ RED LMX GREASE 11390 14OZ RED LMX GREASE
Online
$5.72 for 1 EA
Retail $6.99
Mfr PN: 11390
Stock: 13
RED LMX GREASE Industrial and agricultural Lithium High tackness provices superior adhesion Stays where you need it for long term - performance Highly water insoluble Red grease is rated gc-lb by NLGI NIgi 2: Drop point 510 degrees F 11390 14OZ RED LMX GREASE SIZE:14 Oz. COLOR:Red
Online
$5.72 for 1 EA
Retail $6.99
Mfr PN: 11390
Stock: 13

Ingersoll-Rand EB2125X Air Impact Wrench, 1/2 in, 8900 rpm, 1200 bpm, 1/4 in NPT Ingersoll-Rand EB2125X Air Impact Wrench, 1/2 in, 8900 rpm, 1200 bpm, 1/4 in NPT
Online
$189.54 for EA
Mfr PN: EB2125X
Stock: 1
690 ft.-lbs. of reverse torque means you'll have the power to burst through those stubborn bolts. Comfortable and easy to use. One hand forward/reverse switch. Lightweight at only 4.2 lbs. Made in the U.S.A. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$189.54 for EA
Mfr PN: EB2125X
Stock: 1

Campbell Hausfeld PA104000AV Tee Fitting, 1/4 in, MNPT X FNPT, Brass Campbell Hausfeld PA104000AV Tee Fitting, 1/4 in, MNPT X FNPT, Brass
Online
$10.80 for 4 EA
Retail $14.20
Mfr PN: PA104000AV
Stock: 0
Supplies two air tools from one source and features a corrosion resistant brass construction. 1/4" (M) x 1/4" (F) x 1/4" (F). This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$10.80 for 4 EA
Retail $14.20
Mfr PN: PA104000AV
Stock: 0

PINNER MICRO 23GA 1/2IN TO 2IN PINNER MICRO 23GA 1/2IN TO 2IN
Online
$282.20 for EA
Mfr PN: 8L0001N
Stock: 0
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$282.20 for EA
Mfr PN: 8L0001N
Stock: 0

NAILER STRIP MAGAZINE 1-1/2IN NAILER STRIP MAGAZINE 1-1/2IN
Online
$232.78 for EA
Mfr PN: 10P0001N
Stock: 0
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$232.78 for EA
Mfr PN: 10P0001N
Stock: 0

NAILER STRIP MAGAZINE 2-1/2IN NAILER STRIP MAGAZINE 2-1/2IN
Online
$329.61 for EA
Mfr PN: 10R0001N
Stock: 0
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$329.61 for EA
Mfr PN: 10R0001N
Stock: 0

Senco 4W0001N Heavy Duty Wire Stapler, 1-1/2 in, 16 ga, 160 Staple Senco 4W0001N Heavy Duty Wire Stapler, 1-1/2 in, 16 ga, 160 Staple
Online
$319.44 for EA
Mfr PN: 9T0001N
Stock: 0
Lightweight Aluminum housing with adjustable depth of drive and stretch comfort grip. 'Easy Clear' jam clearing, over-molded trigger and belt hook. Tool Oil Required. Specs: Height: 9"; Length: 15.25"; Weight: 5 lb. Reg. Operating Pressure: 70-120 PSI; Mo de of Operation: Contact Actuation. Fastener Specifications: 1" Wide Crown, 16-Gauge Staples, 3/4" - 1-1/2" Length. Capacity: 160 plus. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$319.44 for EA
Mfr PN: 9T0001N
Stock: 0

Ingersoll-Rand 308B Straight Air Angle Die Grinder, 92 psi, 7 cfm, 25000 rpm, 3/8 in Ingersoll-Rand 308B Straight Air Angle Die Grinder, 92 psi, 7 cfm, 25000 rpm, 3/8 in
Online
$103.05 for EA
Mfr PN: 308B
Stock: 0
Lightweight, durable and maneuverable. Comfortable composite grip is ideal for a variety of applications including porting, weld breaking, de-burring, polishing and grinding. Powerful motor delivers 0.33 hp (0.25 kw) and 25,000 rpm free speed. Integral sa fety lock throttle lever prevents accidental start-up. Tool comes with 1/4" and 6 mm collets and 2 wrenches. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$103.05 for EA
Mfr PN: 308B
Stock: 0

Ingersoll-Rand 302B Right Angle Air Angle Die Grinder, 90 psi, 23 cfm, 20000 rpm, 3/8 in Ingersoll-Rand 302B Right Angle Air Angle Die Grinder, 90 psi, 23 cfm, 20000 rpm, 3/8 in
Online
$125.28 for EA
Mfr PN: 302B
Stock: 0
Lightweight, durable and maneuverable. Comfortable composite grip is ideal for a variety of applications including porting, weld breaking, de-burring, polishing and grinding. Powerful motor delivers 0.33 hp (0.25 kw) and 25,000 rpm free speed. Integral sa fety lock throttle lever prevents accidental start-up. Tool comes with 1/4" and 6 mm collets and 2 wrenches. Rear exhaust directs air away from the operator. Built in lubricating wick increases angle gear life. Composite housing protects tool from cold a ir and offers greater operator comfort. Durable ball bearing construction improves balance, reduces vibration and ensures longer life. HP=1/3 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$125.28 for EA
Mfr PN: 302B
Stock: 0

Ingersoll-Rand 125 Standard Duty Needle Scaler, 4600 bpm, 1 in, 1/4 in NPT Inlet Ingersoll-Rand 125 Standard Duty Needle Scaler, 4600 bpm, 1 in, 1/4 in NPT Inlet
Online
$217.32 for EA
Mfr PN: 125
Stock: 0
For surface preparation work involving the cleaning or removal of paint, rust, dirt or weld slag. Durable, dependable and economical. 19 needles; each needle is 1/8" (3.2 mm) - 4600 blows per minute of free speed. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$217.32 for EA
Mfr PN: 125
Stock: 0

Ingersoll-Rand 259G General Duty Air Impact Wrench, 3/4 in, 6000 rpm, 8 cfm, 90 psi, 3/8 in NPT Ingersoll-Rand 259G General Duty Air Impact Wrench, 3/4 in, 6000 rpm, 8 cfm, 90 psi, 3/8 in NPT
Online
$298.54 for EA
Mfr PN: 259G
Stock: 0
Non-biased motor delivers 1,050 ft-lb (1424 Nm) of maximum torque in both forward and reverse. Rocking dog impact mechanism works well on a wide range of air pressures. Two power settings in both forward and reverse. Variable speed trigger offers impressi ve control. Handle-vented exhaust directs air away from the operator. Silenced exhaust reduces tool noise while in use. Ergonomic design for improved tool handling. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$298.54 for EA
Mfr PN: 259G
Stock: 0

Ingersoll-Rand EC400-NS Needle Scaler Attachment, For Use With 114GQC Model Air Hammer, Durable Steel Ingersoll-Rand EC400-NS Needle Scaler Attachment, For Use With 114GQC Model Air Hammer, Durable Steel
Online
$41.76 for EA
Retail $52.59
Mfr PN: EC400-NS
Stock: 0
Change your air hammer into a needle scaler with a twist of the arm. It gives you the versatility you need to fly through real work. For use with the Ingersoll Rand 114GQC Air Hammer. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$41.76 for EA
Retail $52.59
Mfr PN: EC400-NS
Stock: 0

Ingersoll-Rand 114GQC Air Hammer, 4 cfm, 3/8 in, 1/4 in NPT, 0.401 in, 3500 bpm Ingersoll-Rand 114GQC Air Hammer, 4 cfm, 3/8 in, 1/4 in NPT, 0.401 in, 3500 bpm
Online
$50.84 for EA
Retail $64.05
Mfr PN: 114GQC
Stock: 0
Air hammers with chisel set quick change Medium barrel length with built-in power regulator, professional touch trigger. Designed for exhaust work, cutting metals, chipping and scraping surfaces. Specs: Delivers 3,500 BPM., 11/16 inches bore diameter, 2- 5/8 inches stroke length, 4 CFM, 1/4 inches air inlet, 3/8 minimum hose size. Includes chisel shank size.401. ...
Online
$50.84 for EA
Retail $64.05
Mfr PN: 114GQC
Stock: 0

SPRAYIT SP-352 Gravity Feed Spray Gun with Aluminum Swivel Cup SPRAYIT SP-352 Gravity Feed Spray Gun with Aluminum Swivel Cup
Online
$26.00 for Each
Retail $37.14
Mfr PN: SP-352
Stock: 0
  • SPRAYIT SP-352 Gravity Feed Spray Gun with Aluminum Swivel Cup
  • One-piece lightweight aluminum gun body with 13.5 oz./ 0.4 l aluminum cup
  • Separate and Adjustable fluid , fan pattern and air controls for precise application
  • Stainless steel fluid needle and nozzle - corrosion resistant for longer life
  • Tip size: 1.5 mm
  • Air consumption 4.2 to 6.0 CFM @ 30 PSI
  • Working pressure 44-58 PSI. Maximum pressure 60 PSI
  • Fan Pattern: 5.5' to 7.5'
  • Air inlet: 1/4 NPT hose connector
  • General purpose spray gun, smooth action trigger pull
  • Good for lacquers,enamels,urethane and fast dry and low viscosity paints
  • Powerful Atomization
  • Includes extra Spanner, Brush, and socket
  • Limited Warranty 1 Year
  • Dimensions: 11" H x 6" L x 4.5" W
Online
$26.00 for Each
Retail $37.14
Mfr PN: SP-352
Stock: 0

Air Compressor/Tire Inflator Air Compressor/Tire Inflator
Online
$133.33 for each
Retail $179.99
Mfr PN: MF1089
Stock: 161
Portable 12V Dually Air Compressor/Tire Inflator w/ 24 Ft Coil Hose - Chrome

This item cannot ship to APO/FPO addresses. Please accept our apologies.
Online
$133.33 for each
Retail $179.99
Mfr PN: MF1089
Stock: 161

Air Compressor/Tire Inflator Air Compressor/Tire Inflator
Online
$72.00 for each
Retail $84.99
Mfr PN: MV50
Stock: 0
Hi Volume 12V Air Compressor/Tire Inflator w/ 16 Ft. Coil Hose for Trucks

This item cannot ship to APO/FPO addresses. Please accept our apologies.
Online
$72.00 for each
Retail $84.99
Mfr PN: MV50
Stock: 0

Expert Control Spray Gun Expert Control Spray Gun
Online
$39.99 for each
Retail $51.98
Mfr PN: HVA004
Stock: 0
The HV3500 spare Expert Control spray gun is perfect to use with different colors on the same job or to have a spare if painting a variety of jobs. Includes complete spray gun with 1 qt. wide-mouth paint container, 2.0mm brass tip and needle. Features 3 spray pattern adjustor, thumb control paint flow dial, comfort grip handle and trigger, front loading tip and needles and angled pick up tube for overhead or downward spraying.

Online
$39.99 for each
Retail $51.98
Mfr PN: HVA004
Stock: 0

Air Compressor/Tire Inflator Air Compressor/Tire Inflator
Online
$146.66 for each
Retail $199.99
Mfr PN: MV90
Stock: 0
Portable Mega Air Compressor/Tire Inflator w/ 24Ft Coil Hose - Red

This item cannot ship to APO/FPO addresses. Please accept our apologies.
Online
$146.66 for each
Retail $199.99
Mfr PN: MV90
Stock: 0

Brad Nailer/Finish Stapler Brad Nailer/Finish Stapler
Online
$154.37 for 1 EA
Mfr PN: SB-2IN1
Stock: 6
2-IN-1 BRAD NAILER/FINISH STAPLER For int/ext finish and trim, furniture & - cabinet work, staircases, paneling and crafts Adjustable depth control; bottom load magazine Rubber grip; fastener view window Magazine cap. 100 Operating pressure 70-100 psi Use 5/8" to 1-5/8" 18-ga. BT 1300 Series brads or SX5035 7/32 Crown staples, 1/2" to 1-1/2" SB-2IN1 BRD NAILER/FIN STAPLER
Online
$154.37 for 1 EA
Mfr PN: SB-2IN1
Stock: 6

1 GALLON TRIM AIR COMPRESSOR 1 GALLON TRIM AIR COMPRESSOR
Online
$210.01 for 1 EA
Mfr PN: D55140
Stock: 2
H-D 1 GALLON TRIM COMPRESSOR .75 SCFM DELIVERED @90 PSI trim compressor 1.0 gal. tank and 135 max PSI for quick recovery Durable oil free pump-maintenance-free operation 2.6 amp draw for easy start-ups Lightweight; 24 lbs. thin (9.0") compact design Belt drive - ball valve tank drain Includes (1) quick connect coupler Convenient cord wrap - high-flow regulator D55140 1G TRIM COMPRESSOR SIZE:120V-2,200rpm
Online
$210.01 for 1 EA
Mfr PN: D55140
Stock: 2

Coil Roofing Nailer Coil Roofing Nailer
Online
$285.74 for 1 EA
Mfr PN: RN46-1
Stock: 19
STANLEY COIL ROOFING NAILER Contact trip Fastening range: 3/4" - 1-3/4" Replaceable anti-slip rubber frame protector Easy one-piece, one-step loading Increased fastener range Comfort grip handle, shingle placement guide Long life carbide steel contact parts Use on new or re-roof applications RN46-1 COIL ROOFING NAILER
Online
$285.74 for 1 EA
Mfr PN: RN46-1
Stock: 19

1.6 HP CONTINUOUS 200 PSI, 15 GALLON WORKSHOP AIR COMPRESSOR 1.6 HP CONTINUOUS 200 PSI, 15 GALLON WORKSHOP AIR COMPRESSOR
Online
$514.60 for Each
Retail $723.90
Mfr PN: D55168
Stock: 0
The DEWALTŪ, D55168, heavy duty 15 Gallon, 200 PSI wheeled compressor is an oil-free compressor that delivers 5.4 CFM at 90 PSI, with an efficient, high-pressure technology that allows for longer tool runtime and increased pump/motor life. This compressor is perfect for powering a dual-action sander or a random orbit sander, or fastening using impact wrenches and ratchet wrenches, or powering grinders, cut-off tools, and reciprocating saws. Also useful in supplying power for spray guns in painting, gluing, or lacquering applications. Compact design allows for easy transport and storage.
Online
$514.60 for Each
Retail $723.90
Mfr PN: D55168
Stock: 0

2 HP 4 GALLON TWIN AIR COMPRESSOR 2 HP 4 GALLON TWIN AIR COMPRESSOR
Online
$349.14 for 1 EA
Mfr PN: D55151
Stock: 4
100 PSI TWIN-TANK AIR COMPRESSOR Direct drive compressor has 3.2 CFM delivered - at 100 PSI for quick recovery Twin stack tanks for 4 gallon capacity Oil lubricated pump w/cast iron cylinder 1.1 HP direct drive motor - pump speed 3,400 rpm 120 volt AC, 14 Amps, 60 Hz, 2 pole motor High-flow regulator for increase performance Dual soft start valves assist in cold weather D55151 2HP 4G TWIN COMPRESSOR SIZE:18.5"x15"x16.75" COLOR:Yellow/Black
Online
$349.14 for 1 EA
Mfr PN: D55151
Stock: 4

38-900 1/8 IN. TANK VALVE 38-900 1/8 IN. TANK VALVE
Online
$2.68 for 1 EA
Retail $3.49
Mfr PN: 38-900
Stock: 68
AIR TANK VALVE Use with compressed air tanks For rapid filling or deflation of air - tanks and air lines 200 PSI max. pressure Includes cap and core 29/32" length 1/8" NPT 38-900 1/8 IN. TANK VALVE
Online
$2.68 for 1 EA
Retail $3.49
Mfr PN: 38-900
Stock: 68

Abbott Rubber 1025-0750R-50-CRS Universal 2-Lug Air Hose 50 ft, 300 psi, EPDM Rubber Abbott Rubber 1025-0750R-50-CRS Universal 2-Lug Air Hose 50 ft, 300 psi, EPDM Rubber
Online
$64.73 for EA
Retail $83.35
Mfr PN: 1025-0750R-50-CRS
Stock: 0
Rubber hose, durable, abrasion resistant. UNIVERSAL 2-LUG FITTINGS Size=3/4" x 50'PSI EPDM=300 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$64.73 for EA
Retail $83.35
Mfr PN: 1025-0750R-50-CRS
Stock: 0

Pro-Flex PFCT-3475 Flexible Hose, 3/4 in x 75 ft, 304 Stainless Steel Pro-Flex PFCT-3475 Flexible Hose, 3/4 in x 75 ft, 304 Stainless Steel
Online
$246.65 for COIL
Retail $315.09
Mfr PN: PFCT-3475
Stock: 0
This item can NOT be shipped to these states MA, NH,
CSST CORRUGATED GAS PIPING Corrugated stainless steel tubing used to - supply natural gas or propane in residential,- commercial and industrial buildings High-strength piping system can be routed - beneath, through & alongside basement joints,- inside interior wall cavity or though attics Extremely flexible-holds shape after bending Meets NFPA-54 codes & ANSI LC-1 requirements PFCT3475 3/4X75 FT. CSST TUBING SIZE:3/4" x 75 Ft. COLOR:Yellow
Online
$246.65 for COIL
Retail $315.09
Mfr PN: PFCT-3475
Stock: 0

21-605 1/4 AIR SWIVEL HOSE FITTING 21-605 1/4 AIR SWIVEL HOSE FITTING
Online
$7.72 for 1 EA
Retail $10.99
Mfr PN: 21-605
Stock: 14
AIR LINE SWIVEL FITTINGS 1/4" NPT male fitting x 1/4" NPT female fitting Full 360 degree swivel for twist free action Can use from compressor to air line connection 21-605 1/4 AIR SWIVEL HOSE FTG
Online
$7.72 for 1 EA
Retail $10.99
Mfr PN: 21-605
Stock: 14

Ingersoll-Rand 170G Air Ratchet Wrenches, 3/8 Inch, VS Ingersoll-Rand 170G Air Ratchet Wrenches, 3/8 Inch, VS
Online
$80.36 for EA
Retail $87.55
Mfr PN: 170G
Stock: 0
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$80.36 for EA
Retail $87.55
Mfr PN: 170G
Stock: 0

6-5361 BLOW GUN W/4 FT. WAND 6-5361 BLOW GUN W/4 FT. WAND
Online
$16.53 for 1 EA
Retail $22.99
Mfr PN: 6-5361
Stock: 13
SAFETY BLOW GUNS Perfect for cleaning hard to reach areas in - cars, tractors, combines & other applications Blow gun includes safety tip & rubber tip Max pressure: 150 PSI - Max Temp: 175 deg. F Zinc alloy body, aluminum extension, stainless- spring and synthetic washer Flow 10.5 SCFM @ 100 PSI for safety brass nozzle Flow 11.6 SCFM @ 100 PSI f/non-safety rubber tip 6-5361 BLOW GUN W/4 FT. WAND SIZE:4 Ft. Length
Online
$16.53 for 1 EA
Retail $22.99
Mfr PN: 6-5361
Stock: 13

Ingersoll-Rand 301B Right Angle Air Angle Die Grinder, 24 cfm, 21000 rpm, 3/8 in Ingersoll-Rand 301B Right Angle Air Angle Die Grinder, 24 cfm, 21000 rpm, 3/8 in
Online
$75.05 for EA
Mfr PN: 301B
Stock: 0
HP=1/4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$75.05 for EA
Mfr PN: 301B
Stock: 0

Ingersoll-Rand 107XPA Air Ratchet Wrenches, 3/8 Inch, VSR Ingersoll-Rand 107XPA Air Ratchet Wrenches, 3/8 Inch, VSR
Online
$124.42 for EA
Retail $135.55
Mfr PN: 107XPA
Stock: 0
Features variable speed reverse lever-style throttle, with 160 RPM, 54 ft-lb (73 Nm) of maximum torque, and a 360 degree adjustable exhaust that directs air away from the operator and the work. Specs: average air consumption (CFM) is 4, CFM at load 19, in let size is 1/4", and min. hose size is 5/16". This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$124.42 for EA
Retail $135.55
Mfr PN: 107XPA
Stock: 0

Ingersoll-Rand 2100G Composite Air Impact Wrench, 1/2 in, 9500 rpm, 1200 bpm, 5 cfm, 90 psi Ingersoll-Rand 2100G Composite Air Impact Wrench, 1/2 in, 9500 rpm, 1200 bpm, 5 cfm, 90 psi
Online
$154.98 for EA
Retail $168.85
Mfr PN: 2100G
Stock: 0
Powerful, 550 ft-lbs of max reverse torque. 6-vane motor with forward power regulator, composite housing, handle exhuast, 360 degree swivel inlet, and twin hammer impact mechanism. Specs: no load speed is 9,500 RPM, average air consumption (CFM) is 5, CFM at load 25, 1,200 IPM, inlet size is 1/4", min. hose size is 3/8", noise level is 96.6 db and weighs 4.3 lbs. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$154.98 for EA
Retail $168.85
Mfr PN: 2100G
Stock: 0