PC-WOODY EPOXY WOOD REPAIR
A tan epoxy paste formulated to replace missing and rotted wood
Has structural strength greater than most wood
Permanent wood repair for interior/exterior use
Formulation provides extended working time
Resistant to weather elements, mildew dry rot,UV light & pressure treated wood chemicals
Paint, stain, drill, sand or file after curing
023334 1.5OZ PC-WOODY EPOXY
SIZE:1.5 Oz.
The PC Products PC-Woody is a two-part epoxy paste used to replace missing or rotted wood in indoor and outdoor applications. After maximum curing, the product is stronger than most wood and provides resistance to mildew, dry rot, UV light, and fresh and salt water, as well as chemical resistance in pressure-treated wood. Mixing the two parts forms a paste that has a working time of 30 to 40 minute (at 70 degrees F), allowing time for adjustments. The paste has high tack to help reduce drips or sags while hardening. After the PC-Woody is fully cured, it can be painted, stained, and machined. It is nonconductive and nontoxic after curing.
Specifications
Application temperature range | 35 to 115 degrees F |
Service temperature range | -20 to +200 degrees F |
Working time | 30 to 40 minutes (at 70 degrees F) |
Cure time for service | Overnight (dependent on temperature, humidity, and application size) |
Full cure time | 1 week (dependent on temperature, humidity, and application size) |
Mix ratio | 1:1 |
Protective Coating Company manufactures products to repair and restore various materials, including wood and concrete. The company, founded in 1954, is headquartered in Allentown, PA.
What's in the Box?
- 1.5 oz. PC-Woody in two jars (0.75-oz. jar of Part A and 0.75-oz. jar of Part B in carded sleeve)
This product ships in approximately 1 days
This product is made in US