1. Home:
  2. showbrand
 

Shop by Brand: HITACHI POWER TOOLS

BLADE CIRC SAW 7-1/4IN 4T BLADE CIRC SAW 7-1/4IN 4T
Online
$48.76for EA
Retail $61.45
Mfr PN: 18008M
Stock: 156
For cutting fiber cement board. Thin kerf, .087", saw blades for circular saws. Crosscutting and ripping of fiber cement board, siding and trim. Lasts 5 times longer cutting life than other diamond tipped blades and 30 times longer than traditional carbid e blades. Flat top .063" plate, 12 degree hook angle. Construction grade. 5/8" ROUND ARBOR/DIAMOND KNOCKOUT Dia In=7-1/4Teeth=4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$48.76for EA
Retail $61.45
Mfr PN: 18008M
Stock: 156

BLADE CIRC SAW HARDI 10IN 6T BLADE CIRC SAW HARDI 10IN 6T
Online
$96.78for EA
Retail $99.09
Mfr PN: 18108M
Stock: 17
For cutting fiber cement board. Thin kerf saw blades for circular saws. Alternate top bevel, .063" plate, .087" kerf, 12 degree hook angle. Construction grade. 5/8" ROUND ARBOR Dia In=10Teeth=6 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$96.78for EA
Retail $99.09
Mfr PN: 18108M
Stock: 17

HAMMER DEMO 43LB 1-1/8IN HEX HAMMER DEMO 43LB 1-1/8IN HEX
Online
$1249.62for EA
Mfr PN: H65SD3M
Stock: 0
User Vibration Protection and Aluminum Housing body is the perfect combination of performance and comfort. Elastomer grip reduces vibration transfer, while providing a secure hold for added safety. Cushioned auxiliary handle rotates 360 degrees. Universal tool retainer accepts 1-1/8" hex shank bits, standard hex, collarless retaining groove and air tool bits. Large trigger switch with lock-on increases productivity and reduce fatigue. Sealed lubrication prevent grease from leaking and dust from creping in . Impressive power to weight ratio for balanced and comfortable operation. Specs: 1,400 BPM, 33.2 ft/lbs impact energy, 1,240 W power input, 23-3/4" length, weighs 44.3 lbs. Includes: plastic rolling case and side handle. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$1249.62for EA
Mfr PN: H65SD3M
Stock: 0

HAMMER ROTARY SDS 1-9/16IN HAMMER ROTARY SDS 1-9/16IN
Online
$517.30for EA
Mfr PN: DH40MCM
Stock: 16
Two modes of operation, hammer only and hammer drilling. Designed to take on a variety of tasks including drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods. Features large change lever, oversize trigger switch, soft over-molded handle, and 360 degree side handle. Specs: Vibration Level 16.5m/sec2, No Load Speed 620/RPM, Impact Rate 2,800/BPM, Impact Energy 6.3ft/lbs., Drill Bit Capacity: 1-9/16", Core Bit Capacity: 4-1/8", Weight: 15.6lbs. Includes: side handle, depth stopper rod, grease and carrying case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$517.30for EA
Mfr PN: DH40MCM
Stock: 16

Hitachi 725397 Jig Saw Blade, 4 in L, 6 TPI Hitachi 725397 Jig Saw Blade, 4 in L, 6 TPI
Online
$21.54for PK 3
Retail $26.15
Mfr PN: 725397M
Stock: 0
JIGSAW BLADE Fast, coarse cutting in abrasive materials FRP 1/4" to 3/4" Cement bonded particle board: 1/4" to 2-3/8" Total length: 4" Tooth set: side, carbide tipped 3 blades per package 725397 3PK 3 IN. 6T JIGSAW BLADE SIZE:3" DESC:6 TPI
Online
$21.54for PK 3
Retail $26.15
Mfr PN: 725397M
Stock: 0

Hitachi C10FCH2 Compound Corded Miter Saw with Laser Marker, 120 VAC, 15 A, 5000 rpm Hitachi C10FCH2 Compound Corded Miter Saw with Laser Marker, 120 VAC, 15 A, 5000 rpm
Online
$251.04for EA
Mfr PN: C10FCH2SM
Stock: 6
Laser marker system for increased cutting accuracy. Horizontal handle, Large table, large extended fence raises to 4" for cutting crown molding vertically. Thumb actuated positive stops for quick miter adjustments. Carbon brush access, allows user to repl ace brush as needed Dust collector attachment, to minimize airborne particles. Max work piece capacity is 2-5/16" H, max. by 5-21/32" W. Specs: Single-phase 120VAC 60Hz motor, 0-52 degree miter angle range to the right and left, 0-48 degree bevel angle r ange to the left with adjustable bevel stops. Includes: 10" tct saw blade, vice assembly with knob bolt, 10mm box wrench, 4mm hex bar wrench. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$251.04for EA
Mfr PN: C10FCH2SM
Stock: 6

Hitachi C10FSBP4 Double Bevel Sliding Compound Corded Miter Saw, 120 VAC, 12 A, 10 in Dia Hitachi C10FSBP4 Double Bevel Sliding Compound Corded Miter Saw, 120 VAC, 12 A, 10 in Dia
Online
$770.18for EA
Mfr PN: C10FSBSM
Stock: 12
Positive angle stoppers for easy adjustment of teeth, turn table position for miter cutting (at the right and left of the 0-degree center setting, at 15,22.5, 31.6 and 45-degree settings). High sub fence. Legibly labeled angle scale and bevel scale. High dust collecting performance. Splinter guard, also serving for cut alignment. Electronically controlled soft start and constant speed for smooth, accurate cutting, fine surface finish and low noise operation. Poly V-belt and motor driving system for longer service life. STANDARD EQUIPMENT: 1 each: Vise Assembly, dust bag, 10mm box wrench, 255mm (10") TCT saw blade. SPECIFICATIONS: 10" diameter, 120V, 12 Amp, 1,400W max. output, 3,800 RPM, soft start and speed control. Max cutting capacities: 0-degree (right angle), miter cut 45-degree (left/right), miter right 57-degree, bevel cut 45-degree (left), bevel cut 45-degree (right), miter left/right 45-degree plus bevel left 45-degree, miter right 45-degree plus bevel right 45-degree. Miter cuttin g range: 0-45 degree left, 0-57 degree right. Bevel cutting range: 0-45 right and left. 20-3/4W x 41-1/2"L x 24-1/4"H. 43 lbs. tool weight. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$770.18for EA
Mfr PN: C10FSBSM
Stock: 12

Hitachi C12FDH Dual Compound Miter Saw, 120 V, 15 A, 12 in, 4000 rpm Hitachi C12FDH Dual Compound Miter Saw, 120 V, 15 A, 12 in, 4000 rpm
Online
$405.81for EA
Mfr PN: C12FDHSM
Stock: 0
Laser marker system accurately indicates where the blade will cut on the material and can be easily adjusted to the right or the left of the cut mark depending upon the user preference. Powerful 15 amp motor with 1,950 watts of output power smoothly power s through hardwoods with ease. Elastomer compound coats the horizontal handle, reducing vibration, while adding comfort and preventing slippage. Tall, pivoting aluminum fence that stands at a height of 5-1/8" allows crown molding to be cut vertically for convenience. Large base provides better support and balance to prevent material from warping. Externally accessible carbon brushes allow for quick and easy maintenance to prolong tool life. Miter scale ranges from 0-52 degrees, both to the right and left, for a broader range of cuts. Miter angles can be quickly adjusted using Hitachi's thumb actuated positive stops. Bevel scale ranges from 0-48 degrees to the right and left allowing the material to stay in place while the saw head flips to make opposing cuts. After major bevel angle is secured, micro-bevel adjustment knob can be used to dial-in to a precise angle without the weight of the saw head compromising the accuracy. Weighs 46.3 lbs. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$405.81for EA
Mfr PN: C12FDHSM
Stock: 0

Hitachi C8FSE Single Bevel Sliding Compound Corded Miter Saw, 120 VAC, 9.2 A, 1050 W, 5500 rpm Hitachi C8FSE Single Bevel Sliding Compound Corded Miter Saw, 120 VAC, 9.2 A, 1050 W, 5500 rpm
Online
$487.14for EA
Mfr PN: C8FSESM
Stock: 11
Electronic speed control, positive miter stops for quick adjustments, adjustable pivot fence, splinter guard, externally replaceable carbon brushes, dust collector attachment, precise compound cuts, easy-to-read measurements and quick settings, Linear bal l bearing slide system, vertical handle with elastomer grip. Specs: 5,500 RPM, 8-1/2" blade diameter, 5/8" arbor size, bevel angle range: (Right) 0-5 degrees, (Left) 0-48 degrees, miter angle range: (Right) 0-57 degrees, (Left) 0-45 degrees, miter detent stops: (R & L) 15, 22.5, 31.6, 45, degrees, cross cut capacity (90 degrees) 2-9/16"x12", size 21-27/32"Wx31-3/32"Lx19-3/32"H, weighs 31 lbs. Includes: 8-1/2" TCT saw blade, dust bag, vice assembly, box wrench, sub fence. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$487.14for EA
Mfr PN: C8FSESM
Stock: 11

Hitachi CC14SFS Cut-Off Saws, 14 Inch, 15 Amp Hitachi CC14SFS Cut-Off Saws, 14 Inch, 15 Amp
Online
$261.48for EA
Mfr PN: CC14SFSM
Stock: 0
Powerful Hitachi motor, soft grip D-handle for easy operation and trigger switch with lock-off button and spark chute (diversion guard) for operators safety. Quick-locking vise for fast clamping. Spindle lock for easy wheel replacements. Double insulation . STANDARD EQUIPMENT: 1 cut-off wheel, 1 hex bar wrench. SPECIFICATIONS: 14" wheel diameter, 1" arbor. Capacity: 65mm (2-9/16") bar dia., 120mm (4-47/64") pipe dia., 130mm x 115mm (5-1/8" x 4-1/2") 235mm x 70mm (9-1/4" x 2-49/64") shape steel (W x H). 2,0 00W/AC 230V, 2,400/AC240V (15 AMP/AC120V power input (Full-Load Current for USA). 3,800/min no-load speed. 603 x 318 x 603mm. 36 lbs. tool weight. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$261.48for EA
Mfr PN: CC14SFSM
Stock: 0

Hitachi CJ90VST Orbital Action Corded Jig Saw, 5.5 A, 3/4 in Stroke, 850 - 3000 spm Hitachi CJ90VST Orbital Action Corded Jig Saw, 5.5 A, 3/4 in Stroke, 850 - 3000 spm
Online
$115.41for EA
Mfr PN: CJ90VSTM
Stock: 19
Variable speed dial with tool less blade change by lever and a new orbital locus/balance for smooth cutting, 3-mode orbital action, durable aluminum side cover and soft grip handle. Specs capacity: wood (3-1/2"), mild steel plate (5/16"), minimum cutting radius (1"), base tilt angle 45 degree right/left, length of stroke 3/4", 850-3,000/min. no load speed (stroke), 9" overall length, weighs 4.9 lbs. Includes: blade, wrench, carrying case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$115.41for EA
Mfr PN: CJ90VSTM
Stock: 19

Hitachi D10VH Lightweight Corded Drill, 120 V, 6 A, 3/8 in Keyless Chuck, 0 - 2500 rpm Hitachi D10VH Lightweight Corded Drill, 120 V, 6 A, 3/8 in Keyless Chuck, 0 - 2500 rpm
Online
$70.32for EA
Mfr PN: D10VH2M
Stock: 3
Features variable speed reversing dial located in switch, lightweight, compact, maximum torque of 108.1 in-lbs, form fit palm grip with minimal vibration. Specs: 0-2,500 rpm no load speed, 108.1 in-lbs maximum torque, cut capacity in: wood 1", steel 3/8" and weighs 3.1 lbs. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$70.32for EA
Mfr PN: D10VH2M
Stock: 3

Hitachi D13VF Heavy Duty Corded Drill, 120 V, 9 A, 1/2 in Keyed Chuck, 0 - 850 rpm Hitachi D13VF Heavy Duty Corded Drill, 120 V, 9 A, 1/2 in Keyed Chuck, 0 - 850 rpm
Online
$122.73for EA
Mfr PN: D13VFM/D13VF
Stock: 5
Features variable speed control trigger, cast aluminum gear housing, double gear reduction, oversized reversible switch and trigger lock, removable side handle, and belt hook. Designed to fit in hand for improved control with minimal vibration. Specs: 0 t o 850 rpm no-load speed, 416 in-lbs max torque, drilling capacity in: wood- 2-9/16", steel- 1/2", hole saw- 4-1/2" and weighs 4.6lbs. Includes chuck key, side handle, handle joint, injection molded carrying case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$122.73for EA
Mfr PN: D13VFM/D13VF
Stock: 5

Hitachi DH38YE2 Corded Rotary Hammer, 120 V, 8.4 A Spline Chuck, 0 - 510 rpm Hitachi DH38YE2 Corded Rotary Hammer, 120 V, 8.4 A Spline Chuck, 0 - 510 rpm
Online
$466.60for EA
Mfr PN: DH38YE2M
Stock: 7
Two modes of operation, hammer only and hammer drilling, low vibration levels, 18.8m/s2 (full load), low noise levels of only 95.2 dB (full load), safety clutch shuts down rotation in the event of a bound bit, dust proof cover, auto-stop carbon brushes, s ealed grease system, soft elastomer handle, adjustable 360 degree side handle. Specs: full-load speed is 510RPM, full-load impact is 2,800BPM, solid bit capacity is 1-1/2", core bit capacity is 4-1/8", 16-11/32" long, weighs 14.1 lbs. Includes side handle , dust cover, depth stopper and case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$466.60for EA
Mfr PN: DH38YE2M
Stock: 7

Hitachi DH40MEY Heavy Duty Corded Rotary Hammer Drill, 9.2 A, 950 W, 1-9/16 in SDS Max Chuck Hitachi DH40MEY Heavy Duty Corded Rotary Hammer Drill, 9.2 A, 950 W, 1-9/16 in SDS Max Chuck
Online
$793.60for EA
Mfr PN: DH40MEYM
Stock: 4
Features a new Aluminum Housing Body construction that provides significant durability and extended tool life. This hammer is made for hard work. The powerful 11.3 amp brushless motor provides a no-maintenance tool so you don't have to stop working to per form routine carbon brush changes. Brushless technology also allows the tool to run off a portable generator to eliminate concern about work being slowed by voltage dropping under loads. 8.1 ft lbs of impact energy for busting through hard material. 2,850 full load max impact rate to quickly remove stubborn materials. User Vibration Technology for less fatigue and more production. Internal shock absorbing mechanism to increase the life of the tool by dampening impact on internal parts. Use s popular SDS max bits. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$793.60for EA
Mfr PN: DH40MEYM
Stock: 4

Hitachi EC12 Portable Air Compressor, 4 gal, 125 psi, 4 cfm at 90 psi Hitachi EC12 Portable Air Compressor, 4 gal, 125 psi, 4 cfm at 90 psi
Online
$321.20for EA
Mfr PN: EC99SM
Stock: 36
Vertically stacked twin tanks, 2 gallon capacity each for running multiple nailers (4.0cfm at 90psi). Direct drive electric motor provides durability and long life. All metal inner construction and fan. Line regulator with gauge; oil lubricated pump and O -ring on drain cock makes valve easy to open and close. Specs: Power Output: 2hp; Amps: 14.5; Rpm: 3,450; Air Displacement: 4.0cfm at 90psi; Start/Stop Control: 100/125psi; Tank Capacity: 4.0 gal. Weight: 60lbs; Lubrication: Oil; Recovery Time: 14-sec. In cludes: Synthetic Oil (8oz) & Oil Dipstick. Cap Gal=4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$321.20for EA
Mfr PN: EC99SM
Stock: 36

Hitachi G12SA3 Corded Angle Grinder, 8 A, 1900 W, 10000 rpm, 4-1/2 in Wheel, 5/8-11 Shank Hitachi G12SA3 Corded Angle Grinder, 8 A, 1900 W, 10000 rpm, 4-1/2 in Wheel, 5/8-11 Shank
Online
$124.13for EA
Mfr PN: G12SA3M
Stock: 2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$124.13for EA
Mfr PN: G12SA3M
Stock: 2

Hitachi G12SR3 Corded Angle Grinder, 6 A, 1010 W, 10000 rpm, 4-1/2 in Wheel, 5/8-11 Shank Hitachi G12SR3 Corded Angle Grinder, 6 A, 1010 W, 10000 rpm, 4-1/2 in Wheel, 5/8-11 Shank
Online
$70.32for EA
Mfr PN: G12SR4M
Stock: 25
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$70.32for EA
Mfr PN: G12SR4M
Stock: 25

Hitachi M12VE Plunge Corded Router, 110 V, 3-1/4 hp, 22000 rpm Hitachi M12VE Plunge Corded Router, 110 V, 3-1/4 hp, 22000 rpm
Online
$312.50for EA
Mfr PN: M12VEM/M12VE
Stock: 0
2" x 2-3/4". This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$312.50for EA
Mfr PN: M12VEM/M12VE
Stock: 0

Hitachi N3804AB3 Lightweight Air Finish Stapler, 1-1/2 in, 18 ga, 125 Staple Hitachi N3804AB3 Lightweight Air Finish Stapler, 1-1/2 in, 18 ga, 125 Staple
Online
$119.49for EA
Mfr PN: N3804AB3M
Stock: 42
New selective actuation switch lets the user easily select bump fire or sequential fire modes. Lightweight and compact with 360 degree adjustable exhaust and elastomer grip. Tool-less, easy-to-clear nose and depth of drive. Specs: Weight: 2.2lbs.; Size: 1 0-11/32" L x 9-1/8" H x 2-3/8W; Air pressure (PSI): 70-120; Magazine Type: Steel; Nail Loading Type: Top; Firing Mode: Single-Contact-Selector; No Mar Tip: Yes; Depth Adjustment: Yes; Adjustable Exhaust Port: Yes; Jam Clearing: Yes; Oil-Free: No; Rubber G rip: Yes. Fastener Specifications: Nail Range- 1/2" - 1-1/2"; Staple Capacity: 125. Includes: Safety Glasses; Case; No-Mar Tipx2. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$119.49for EA
Mfr PN: N3804AB3M
Stock: 42

Hitachi N5008AC2 Construction Stapler, 7/16 in, 16 ga, 157 Staple Hitachi N5008AC2 Construction Stapler, 7/16 in, 16 ga, 157 Staple
Online
$341.08for EA
Mfr PN: N5008AC2M
Stock: 37
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$341.08for EA
Mfr PN: N5008AC2M
Stock: 37

Hitachi N5024A2 Lightweight Pneumatic Stapler, 1 in, 16 ga, 157 Staple Hitachi N5024A2 Lightweight Pneumatic Stapler, 1 in, 16 ga, 157 Staple
Online
$341.08for EA
Mfr PN: N5024A2M
Stock: 27
Quick clear jam release, tool-less depth adjustment. Rubber grip for comfortable handling. Plastic magazine with stainless plate. 14-3/8" L x 9-13/16" H x 3-11/32" W. Operating pressure 70 - 120 psi. Air inlet: 1/4" NPT Thread. Magazine capacity 150 stapl es. Adhesive collation. 16 gauge wire, 1" crown, 1"- 2" length. Includes safety glasses and M5 Hex bar wrench. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$341.08for EA
Mfr PN: N5024A2M
Stock: 27

Hitachi NR65AK Lightweight Strip Nailer, 44 Nails, 1-1/2 - 2-1/2 in Paper Strip Collated Nail Hitachi NR65AK Lightweight Strip Nailer, 44 Nails, 1-1/2 - 2-1/2 in Paper Strip Collated Nail
Online
$462.92for 1 EA
Retail $595.89
Mfr PN: NR65AK2
Stock: 9
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$462.92for 1 EA
Retail $595.89
Mfr PN: NR65AK2
Stock: 9

Hitachi NR90ADPR Lightweight Framing Nailer, 50 - 74 Nails, 2 - 3-1/2 in, 70 - 120 psi Hitachi NR90ADPR Lightweight Framing Nailer, 50 - 74 Nails, 2 - 3-1/2 in, 70 - 120 psi
Online
$272.86for EA
Mfr PN: NR90ADS1M
Stock: 40
Lightweight and well-balanced for easy maneuverability. Tool free depth of drive adjustment to flush drive or countersink into varying material. Selective actuation for either sequential or 'bump' fire nailing with a simple flip of a switch for tool-less transitions. Specs: Weight: 7 lbs.; Air Inlet:3/8"; Operating Pressure 70-120 PSI; Air Consumption at 100 PSI.09 scfm; Depth Adjustment Tool-less; Actuation Selective; Jam Clearing; Open Nose: 18.2L" x 4.9W" x 12.7H". Fastener Specifications: Fastener Typ e: Paper Tape Collation; Magazine Capacity: (.131)86-94 Nails; Magazine Loading: Rear; Magazine Angle: 35 Degrees; Fastener Length: Capacity 2in. - 3-1/2in.; Fastener Diameter: Range.113 - .148. Included: Safety Glasses. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$272.86for EA
Mfr PN: NR90ADS1M
Stock: 40

Hitachi NT65M2(S) Lightweight Finish Nailer, 100 Nails, 1 - 2-1/2 in 16 ga Adhesive Collated Nail Hitachi NT65M2(S) Lightweight Finish Nailer, 100 Nails, 1 - 2-1/2 in 16 ga Adhesive Collated Nail
Online
$204.61for EA
Mfr PN: NT65M2SM
Stock: 49
Integrated air duster button allows air from the compressor to clear away dust and debris from the work surface in preparation for the nail. Selective actuation switch lets the user easily select bump fire or sequential fire modes. Tool-less, easy-to-clea r nose for quick and simple nail extraction, should a nail jam during use. Depth of drive dial allows the user to easily adjust the drive depth for a professional finish. Specs: Fastener Type16-Gauge Finish; Magazine Angle: Straight; Magazine Capacity: 10 0; Magazine: Top Loading; Operating Pressure: 70-120 psi; Actuation Selective: (Sequential/Bump Fire); Tool Length: 11-5/8"; Tool Width: 2-27/32"; Tool Height: 10-7/8"; Tool Weight: 3.7 lbs; GripRubber. Fastener Specifications: Fastener Len gth Capacity: 1"- 2-1/2"; Fastener Diameter Range: 16-Gauge. Included: Safety Glasses; Tool Fitting; No-Mar Tip; Case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$204.61for EA
Mfr PN: NT65M2SM
Stock: 49

Hitachi NT65MA4 Angled Finish Nailer, 100 Nails, 1-1/4 - 2-1/2 in 15 ga Adhesive Collated Nail Hitachi NT65MA4 Angled Finish Nailer, 100 Nails, 1-1/4 - 2-1/2 in 15 ga Adhesive Collated Nail
Online
$206.04for EA
Mfr PN: NT65MA4M
Stock: 81
Integrated air duster button allows air from the compressor to clear away dust and debris from the work surface in preparation for the nail. Selective actuation switch lets the user easily select bump fire or sequential fire modes. Tool-less, easy to clea r nose for quick and simple nail extraction should a nail jam during use. Depth of drive adjustment for accurate nail depth in varying materials. Specs; Actuation Selective (Sequential/Bump Fire); Air Consumption: .042(FT3/Cycle at 100psi); LxWxH: 13-17/3 2" x 3-7/32" x 11-31/32"; Tool Weight: 4.4lbs; Air Inlet 1/4"; Operating Pressure 70-120 psi; Exhaust Deflector:360-Degree Adjustable; Jam Clearing:Tool-Less; Depth Setting:Tool-Less; Magazine Angle: 34-Degrees; Nail Capacity: 100; Magazine Loading: Rear; Fastener Specifications; Fastener Type: 15-Gauge Finish; Fastener Length Capacity: 1-1/4" - 2-1/2"; Fastener Diameter Range: 15-Gauge. Included: Safety Glasses; Case. Rental This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$206.04for EA
Mfr PN: NT65MA4M
Stock: 81

Hitachi NV45AB2 Lightweight Roofing Nailer, 120 Nails, 7/8 - 1-3/4 in Wire Collated Nail Hitachi NV45AB2 Lightweight Roofing Nailer, 120 Nails, 7/8 - 1-3/4 in Wire Collated Nail
Online
$374.02for EA
Mfr PN: NV45AB2M
Stock: 38
Tool-less depth of drive adjustment for precision nailing/flush driving. Carbide tipped push lever reduces wear. Pneumatic nail feed mechanism powers both the nail advance and return for consistent operation even in the harshest of conditions. Specs; Maga zine Angle: 16 Degree; Actuation: Contact, Sequential; Air Inlet: 3/8"; Operating Pressure: 70120 PSI; Weight: 5.5 lbs; Jam Clearing: Open-nose; Nail Capacity; 120; Magazine Capacity: 120; Fastener Specifications: Coil, Wire Collation - 7/8" to 1-3/4". I ncludes: Safety Glasses & Shingle Guide Assembly. Side Loading Magazine This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$374.02for EA
Mfr PN: NV45AB2M
Stock: 38

Hitachi NV65AH Lightweight Siding Nailer, 200 - 300 Nails, 1-1/2 - 2-1/2 in, 70 - 120 psi Hitachi NV65AH Lightweight Siding Nailer, 200 - 300 Nails, 1-1/2 - 2-1/2 in, 70 - 120 psi
Online
$502.61for EA
Mfr PN: NV65AH2M
Stock: 39
SIDING COIL NAILER 1-1/2" - 2-1/2" x .090 - .099 Operating pressure: 70-120 psi Lightweight, only 4.6 lbs. Depth of drive adjustment Countersink or flush drive nails Drives wire & plastic sheet collated nails 360 adjustable exhaust deflector Includes: safety glasses & 3 hex bar wrenches NV65AH2 2.5 IN. SIDING COIL NAILR
Online
$502.61for EA
Mfr PN: NV65AH2M
Stock: 39

Hitachi Strap-Tite Pneumatic Fastening Nailer, 22 Nails, 1-1/2 - 2-1/2 in Paper Strip Collated Nail, 80 - 120 psi Hitachi Strap-Tite Pneumatic Fastening Nailer, 22 Nails, 1-1/2 - 2-1/2 in Paper Strip Collated Nail, 80 - 120 psi
Online
$462.92for EA
Mfr PN: NR65AK2SM
Stock: 6
Narrow design allows for use in tight spaces. Overhanging nail tip accurately locates pre-punched holes. Sequential firing mechanism ensures precision nail placement. 360 degree tool-less adjustable exhaust deflector, safety glasses, 3 wrenches. Rear load ing magazine has a collation angle of 36 degrees and can hold 22 nails. Operating air pressure of 80-120 PSI. 3/8" Air Inlet. Dimensions 11-3/4" x 3-3/8" x 13-3/16". Fastener Specifications: 1-1/2" to 2-1/2" x 0.131" - 0.162". This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$462.92for EA
Mfr PN: NR65AK2SM
Stock: 6

Hitachi SV12SG Corded Finish Sander, 1.7 A, 200 W, 14000 rpm Hitachi SV12SG Corded Finish Sander, 1.7 A, 200 W, 14000 rpm
Online
$68.94for EA
Mfr PN: SV12SGM
Stock: 22
Clamp system, easy to use for quick and easy sanding sheet changes, complete ball bearing construction, dust sealed switch, dust collection system, comfortable, soft elastomer covered grip reduces vibration. Specs: no load speed 14,000 OPM, orbit diameter 1/16", abrasive paper size 4-1/2" x 5-1/2", 4-3/8"x4" pad size, 5-3/8"H, weight 2.4 lbs.. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$68.94for EA
Mfr PN: SV12SGM
Stock: 22

Hitachi UC18YRL Universal Battery Charger, Li-Ion/Ni-Cd/Ni-MH, 45 min, 3 Battery Hitachi UC18YRL Universal Battery Charger, Li-Ion/Ni-Cd/Ni-MH, 45 min, 3 Battery
Online
$68.40for EA
Mfr PN: UC18YRLM
Stock: 1
Cooling fan to increase life. 45 minute maximum charge time. For use with all 7.2 to18 volt post style cordless tools. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$68.40for EA
Mfr PN: UC18YRLM
Stock: 1

Hitachi W6V4 Corded Screwdriver, 240 V, 6.6 A, 620 W, 0 - 4500 rpm Hitachi W6V4 Corded Screwdriver, 240 V, 6.6 A, 620 W, 0 - 4500 rpm
Online
$109.10for EA
Mfr PN: W6V4M
Stock: 4
For use in high-speed screw applications, silent clutch reduces noise level to 76dB, removable nose piece, for easy bit replacement and adjustment, lightweight for ease of use and maneuverability, belt hook, convenient for between use. Specs: 1/4" hex bit shank, no load speed 0-4,500RPM, 81.5 in/lbs max torque, silent clutch, fastener capacity: drywall#6, wood#9, machine1/4, weighs 3.1lbs. Includes: 2-9/16" magnetic bit holder, No. 2 Phillips driver bit, sub-stopper (F), and hook. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$109.10for EA
Mfr PN: W6V4M
Stock: 4

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:
SpectrumSuperStore is UpFront

About UsContact UsCustomer Service & PoliciesMerchant ServicePrivacy StatementCustomer FeedbackReturn Policy

Copyright © 1999-2020 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.