Five 1/4 .in x 1 .in rounded slotted head bolts with hex nuts
|
Two 5/16 .in x 1.5 .in coarse thread bolts with hex nuts
|
|
5|16 in. Zinc Anodized Thread Cutting Bolts 50 per Pack Feature:
|
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
|
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
|
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
|
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
|
CALIPER ADAPTER MOUNTING
|
3019BC OPEN FIXED EYE BOLT SNAP
Designed to use with rope, chain, strap, animal-
leashes & other home, farm & rec applications
Open eye designed to be closed with a vice -
or hammer after attachment
Steel body, stainless steel spring with zinc-
die-cast bolt - trigger bolt retraction
Do not use for overhead lifting, support of-
human weight, athletic or playground equipment
3019BC 5/16 IN. X 3 1/2 IN. BOLT SNAP
SIZE:5/16x3-1/2"
CAPACITY:150 Lb. SWLBoxed Loose - Barcoded
|
835 ADJUSTABLE THROW CANE BOLT
Designed for use on heavy wood gates & doors
Can bolt anchors one gate while the gate -
latch acts as a stop for the other gate
Designed for vertical & horizontal applications
Can be held in both closed & open positions by -
using two sockets
(1/2" or 3/4" pipe recommended but not included)
Visual pack with screws
V835 1/2X18 IN. BLACK CANE BOLT
SIZE:1/2" x 18"
FINISH:Black
|
CARRIAGE BOLT - 3/8 X 2"
Use 1 for each frame hinge or other fittings
Sold by the box or bag of 10 bolts & 10 nuts
328503C 3/8X2 IN. CARRIAGE BOLT
SIZE:3/8x2"
|
This item can NOT be shipped to these states CA
GALVANIZED ANCHOR BOLT Includes washers & nuts Recommended for ACQ lumber 8101210G 10X1/2 IN. GALV ANCH BOLT SIZE:10 x 1/2" FINISH:Galvanized |
835 ADJUSTABLE THROW CANE BOLT
Designed for use on heavy wood gates & doors
Can bolt anchors one gate while the gate -
latch acts as a stop for the other gate
Designed for vertical & horizontal applications
Can be held in both closed & open positions by -
using two sockets
(1/2" or 3/4" pipe recommended but not included)
Visual pack with screws
V835 1/2X18 IN. ZINC CANE BOLT
SIZE:1/2" x 18"
FINISH:Zinc
|
2190BC SERIES U BOLTS
For fastening product to pipe, wood, etc.
Suitable for automotive, plumbing & other-
home and industrial applications
Manufactured from steel wire
Plate and hex nuts are included
Packed loose - barcoded
Zinc plated
Size=width between legs x overall length
2190BC #642 ZINC U BOLT
SIZE:2-1/2" x 4"
FITS PIPE:2"Thread Size: 3/8-16
|
2191 U BOLT PLATES
For use with National's 2192 square U-bolt
Made from hot-rolled steel
Zinc plated
Boxed loose - barcoded
2191BC 5/16X2 ZN U BOLT PLATE
SIZE:5/16" x 2"
|
3172BC SWIVEL EYE BRONZE BOLT SNAPS
Designed to use with rope, chain, strap, -
animal leashes & other home & farm uses
Swivel eye eliminates tangling
Solid bronze body & body-stainless steel spring
Excellent for marine & outdoor applications
Do not use for overhead lifting, support of-
human weight, athletic or playground equipment
Boxed loose - barcoded
3172BC 3/4 IN. X 3 5/16 IN. BOLT SNAP
SIZE:3/4x3-5/16"
CAPACITY:170 Lb. SWL
|
2195 ZINC PLATED J BOLTS
Designed for home and farm applications
Standard machine screw threads
Hex nut included
Made from steel wire then zinc plated
Packed loose with barcode
Note Safe Working Load (SWL) limits
2195BC 5/16X5 ZINC J BOLT
SIZE:5/16 x 5"
SWL:160 Lb.
|
3033BC 4-9/16" DOUBLE BOLT SNAP
Designed for rope-chain-animal leashes & other
home-farm and recreational applications
Double bolt for quick attachment at both ends
Do not use for overhead lifting, support of-
human weight-athletic or playground equipment
Retract bolt with pull down trigger
Zinc die-cast body with chrome finish
Boxed loose - barcoded
3033BC 4-9/16 IN. CH DBL BOLT SNAP
SIZE:4-9/16"
CAPACITY:130 Lb. SWL
|
3003BC 3/4" SWIVEL EYE BOLT SNAP
Designed for use with rope, chain, strap, animal
leashes & other home & farm applications
Easy bolt retraction with pull down trigger
Swivel eye eliminates tangling, zinc die-cast-
body & stainless steel spring - zinc plated
Do not use for overhead lifting, support of-
human weight, athletic or playground equipment
Boxed loose - barcoded
3003BC 3/4 IN. X3 11/16 IN. BOLT SNAP
SIZE:3/4x3-11/16"
CAPACITY:120 Lb. SWLBoxed Loose - Barcoded
|
3179BC BRONZE DOULBE BOLT SNAP
Designed for rope-chain-animal leashes & other
home-farm and recreational applications
Solid bronze body & bolt
Double bolt for quick attachment at both ends
Do not use for overhead lifting, support of-
human weight-athletic or playground equipment
Retract bolt with pull down trigger
Boxed loose - barcoded
3179BC 4 1/2 IN. DBL BOLT SNAP
SIZE:4-1/2"
CAPACITY:140 Lb. SWL
|
2190BC SERIES U BOLTS
For fastening product to pipe, wood, etc.
Suitable for automotive, plumbing & other-
home and industrial applications
Manufactured from steel wire
Plate and hex nuts are included
Packed loose - barcoded
Zinc plated
Size=width between legs x overall length
2190BC 662 ZN U BOLT
SIZE:3-1/2"x 5-1/4"
FITS PIPE:3"Thread Size: 3/8-16
|
ANKR-TITE WEDGE ANCHOR
Stud/bolt anchor
Nuts & washers included
AT1270 1/2X7 STUD/BOLT ANCHOR
SIZE:1/2 x 7"
THREAD LENGTH:4-1/2"
|
Hex Bolt 3/8-16 X 2" - A Grade 2 Bolt that's Zinc Plated for durability.Hex Bolt 3/8-16 X 2"- features include:
Below is more info on our Hex Bolt 3/8-16 X 2"- Size: 3/8-16 X 2"Box Qty: 1 This item does not ship to APO/FPO addresses. |
2191 U BOLT PLATES
For use with National's 2192 square U-bolt
Made from hot-rolled steel
Zinc plated
Boxed loose - barcoded
2191BC 3/8X4 ZN U BOLT PLATE
SIZE:3/8" x 4"
|
3260 FORGED EYE BOLT WITH SHOULDER
Forged steel eye bolt - designed with shoulder-
so that it can be tightened in place
Pintle punched for 5/16" (1/2"size) or -
3/8" (5/8" size) bolts
Comes with hex nut
Safe Working Load (SWL) clearly defined on label
Boxed loose with barcode
Galvanized finish
3260BC 1/2X10 GALV EYE BOLT
SIZE:1/2 x 10"
DESC:2,200 Lb. SWL
|
2195 ZINC PLATED J BOLTS
Designed for home and farm applications
Standard machine screw threads
Hex nut included
Made from steel wire then zinc plated
Packed loose with barcode
Note Safe Working Load (SWL) limits
2195BC 5/16X7 ZINC J BOLT
SIZE:5/16 x 7"
SWL:160 Lb.
|
This item can NOT be shipped to these states CA
HWH STEELBINDER SELF-DRILLING SCREW Self-drilling screw for general construction Drill points designed to penetrate metal from - thin sheet metal to 0.250" thicknesses Plated carbon steel indented hex washer head Pre-assembled to dome type or dish bonded For HVAC, roof deck to steel framing and - roof clips to steel framing 1/4-14X1 IN. 250PK #3 TEK SIZE:#14 x 1" FINISH:Carbon-Plated |
2193 STAINLESS STEEL U-BOLTS
Designed for fastening products to pipe/wood,etc
Suitable for automotive, plumbing & other -
home & industrial applications
Excellent for marine & other outdoor uses
Manufactured from stainless steel
Hex nuts included
Bulk pack - bagged
2193BC #536 SS U-BOLT
SIZE:#536
PIPE SIZE:1-1/2"
|
|
|
|
|
Copyright © 1999-2022 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |