These 10 inch tin snips are made with hardened and tempered carbon steel for strength and durability. The long heavy-duty cutting blades will cut sheet metal almost as easily as paper leaving a straight smooth edge. The cushion grips are designed to provide comfortable use but will not protect against electrical shock.
|
PLASTIC CUTTING TOOL
5/8" blade
Ergonomically designed handle for a comfortable-
grip
Designed to cut or trim acrylic, polystyrene an-
d polycarbonate plastic
Protective cap for added security
1999999A PLASTIC CUTTING TOOL
SIZE:7.75x3.75x.5
COLOR:Blue
|
WDF12S 12 IN. STRT TINNER SNIPS
|
WDF10D 10 IN. DUCKBILL SNIPS
|
1-5/16"O.D. capacity handles up to 1" nominal plastic pipe. Compound ratchet action reduces user fatigue. Handle molded from strong, lightweight engineered polymer. All internal parts and pivots made of stainless steel.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
WDF7S 7 IN. STRT TINNER SNIPS
|
WDF12D 12 IN. DUCKBILL SNIPS
|
ESD Safe Precision Flush Cutting Diagonal Cutters. 5.25"/133mm OAL. Low wear lap joint, riveted and able to withstand high levels of load. Two component non-slip soft grip handle, ESD Safe Dissipative.
|
|
Vinyl Grip Heavy Duty High Leverage Diagonal Cutters 8" (AWG #4) Semi-circular. Low wear lap joint, riveted and able to withstand high levels of load. Low force action, clean cutting. Long life is achieved through additional induction hardening of cutting edge to 64 HRC. CV 60 special tool steel hardened and tempered. Soft vinyl grips are oil and solvent resistant.
|
48-22-4510 LEFT AVIATION SNIPS
|
|
|
Cuts 2" nom pipe size or 2-1/2" OD. One-handed operation, frees up the other hand to hold the work. Aluminum cast handles with cushion grip for comfort. Durable powder coat finish for easy clean up. Hardened stainless steel blade design with pointed edge
to pierce the pipe for smooth effortless cut
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
9" Tin Snips are great for all-around cutting of stainless, galvanized, and aluminum sheet metal.
|
CUTTING NIPPERS
Drop forged from high quality diamalloy steel
Heat treated and tempered
Sharp cutting edges hardened and honed
Nickel plated with polished head
Cutting edge: 15/16"
GG010HN 10 IN. DIAMOND NIPPER
SIZE:10"
|
48-22-4532 STRT AVIATION SNIPS
|
48-22-4511 LT RIGHT ANGLE SNIP
|
48-22-4521 RT RIGHT ANGLE SNIP
|
48-22-4040 OFFSET SCISSORS
|
48-22-4520 RT AVIATION SNIPS
|
WAS13S 13 IN. TINNER SNIPS
|
|
"SCOREMASTER" GLASS CUTTER
For general cutting of domestic window glass
Single and double strength glass
01-701 SCOREMSTER GLASS CUTTER
|
DUCKBILL BLADE TINNER SNIPS
Duckbill blades, cuts straight & tight curves
Hot drop forged steel blades for strength/life
Precision-ground blade edges for cutting quality
Comfortable vinyl double-dipped handles
Variety of uses: sheet metal-flashing-canvas-
metal strapping, plastic, screening
Use also on vinyl flooring & siding and
gutter & down spouts
23010 210 10 IN. TINNER SNIPS
SIZE:10"
|
GLASS CUTTER REPLACEMENT WHEEL
For glass machines
02-120 GLASS CUTTER REPL WHEEL
|
PROFESSIONAL GLASS CUTTER
Industrial quality
Designed for the professional tradesman
For straight cutting on smooth glass
Made of sturdy cast iron
Standard glass - steel wheel/ball end
Vinyl pouch, 12 to shelf pack, 144 to case
1023/70 HD GLASS CUTTER
|
- New ergonomic design provides 1-1.5 times the cutting force with half the effort
- High-quality forged steel construction for strength and durability - File and scraper on both blades for cleaning wire - Notched blade for stripping 19 and 23 gauge wire - Cuts up to 16 gauge solid and 12 gauge stranded wire - Serrated blade for non-slip wire cutting |
FLAT BLADE TINNER SNIPS
Cuts straight and wide curves
Hot drop forged steel blades provide maximum -
strength and long life
Precision-ground edges on the blades ensure -
a tight grip on each cut for superior quality
Plastisol encased handles provide comfort -
plus Pro-Touch(TM) grips resist twisting
22012 12 12 IN. TINNER SNIPS
SIZE:12-3/4"
|
DUCKBILL BLADE TINNER SNIPS
Duckbill blades, cuts straight & tight curves
Hot drop forged steel blades for strength/life
Precision-ground blade edges for cutting quality
Comfortable vinyl double-dipped handles
Variety of uses: sheet metal-flashing-canvas-
metal strapping, plastic, screening
Use also on vinyl flooring & siding and
gutter & down spouts
23012 212 12 IN. TINNER SNIPS
SIZE:12-3/4"
|
|
|
|
|
Copyright © 1999-2022 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |