This high quality brass 8 piece punch set is ideal for the gentle removal of pins from your most favorite and older guns, and for the most important or critical cases where softness and gentleness matter.
|
Grace USA Master Gunsmith Brass Punch Set with Bench Block that includes Twenty (20) Brass Punches. This beautiful set of Made in the USA punches will last a lifetime. Every tool that has been produced by Grace USA since 1941 has had a Grace or Morrison hand print on it, insuring genuine quality and precision in every tool that you can trust.
|
Grace USA Master Gunsmith Steel Punch Set with Bench Block that includes Twenty-One (21) Steel Punches. Every tool that has been produced by Grace USA since 1941 has had a Grace or Morrison hand print on it, insuring genuine quality and precision in every tool that you can trust.
|
This Beautifully Crafted Punches In This 7 Piece Punch Set Are Machined From Steel And Are Nickel-Chrome Plated.
|
This is high quality brass 8 piece pin punch set is handcrafted by Grace USA. Grace USA is known for only the highest quality gunsmithing tools and are made in the USA to exacting standards.
|
Replacement Draw Bolts for 4" Punch/Die - Replacement Draw Bolts for 4" Punch/DieReplacement Draw Bolts features include:
Below is more info on our Replacement Draw Bolts for 4" Punch/Die Size: 1 X 5/16" X 4"Use With Part No. : 5441/5451 This item does not ship to APO/FPO addresses. |
This High Quality Hardened Steel 7 Piece Punch Set Is Designed To Easily Remove Roll Pins From Firearms. Balled Tip Helps Locate The Punch On The Pin And Protects Pin Ends From Damage During Removal Or Installation
|
The Grace USA SRS7, a 7 piece Short Roll Pin Punch Set, is designed to start the difficult roll spring/pins in motion without causing any damage to the pins or punch. Finely crafted with care and precision in the USA. Made from quality 5/16 Hex stock.
|
Grace USA Bench Block holder is designed specifically for our Grace USA BRP-8 eight piece Brass Roll Pin Punch Set. Every tool that has been produced by Grace USA since 1941 has had a Grace or Morrison hand print on it, insuring genuine quality and precision in every tool that you can trust.
|
Grace USA Starter short pin punch set - Spp5 - short roll pin punch set, is designed to start the difficult roll spring/pins in motion without causing any damage to the pins or punch. Finely crafted with care and precision in the USA. Every tool that has been produced by Grace USA since 1941 has had a Grace or Morrison hand print on it, insuring genuine quality and precision in every tool that you can trust.
|
GRACE USA 12 Pc Roll Spring Punch Set is manufactured from the highest quality High Carbon molybdenum Tool Steel and heat treated to ensure long life of the punch. Each punch has a reverse taper from tip of punch to help prevent punch from sticking in the work piece. Punches are manufactured from hex stock vs. round which helps stabilize punch from rolling away from user. Sizes are 1/16", 5/64", 3/32", 1/8" 5/32", 3/16", 7/32",1/4", 5/16", 3/8", 7/16", 1/2". 100% Made in the USA.
|
The Wheeler Engineering Delta Series AR Bolt Catch Install Punch Kit starts bolt catch roll pins easily with the starter punch and finishes installation flush with the finishing punch. It is flat on one side for proper alignment and is rubber overmolded to protect the firearm.
|
PLASTIC SCRATCH AWL
Drop forged 3" steel blade goes through handle
Shock resistant durable plastic handle
SC3C PLASTIC SCRATCH AWL
|
HANDYMAN NAIL SET
3 nails included: 1/32", 2/32" & 3/32"
58-230 HANDYMAN NAIL SET
3 Piece set of above 3 sizes
|
TRENDnet's professional punch down tool TC-PDT with 110 and Krone blades inserts and cuts terminations in one operation. Adjustable high and low actuation setting accommodates termination requirements or user preference. With spare storage that helps prevent blade loss the precision blades are conveniently interchangeable and re-versible between 110 and Krone. The punch down tool offers reliable easy-to-use operation at an affordable price.
|
K5 KREG POCKET HOLE JIG
Incorporates best features of every Kreg Jig(R)
All-new clamping mechanism allows for adjustment
without tools or adjusting nuts
Large support wings to hold workpiece steady
Swiveling dust-collection port, spring-loaded -
stop for drill guide block + portable use
Also includes, stepped drill bit, 6" driver bit,
stop collar, Allen wrench & screw & plug pack
K5 POCKET HOLE JIG SYSTEM
|
AUTOMATIC CENTER PUNCH
Unique ball bearing action
Lightweight aluminum body
Long wearing alloy steel parts
5/8" body diameter, 5" overall length
All-steel solid point is replaceable
77 AUTOMATIC CENTER PUNCH
|
Whether you are a professional contractor or a weekend do-it-yourselfer, you will immediately appreciate the great features the Kreg DB210 Foreman Electric Pocket-Hole Machine has to offer. With one pull of the handle, the motor starts, the work piece is
clamped, and the machine drills perfect pocket holes. The adjustable fence positions the work piece for precise pocket depth, and a pair of adjustable stops provides repeatable accuracy. A powerful motor enables fast drilling, and a quick-change chuck all
ows for fast bit changes. Plus, the new Foreman is the first Kreg pocket-hole machine that can create all three types of Kreg joints: standard 3/8", Micro Pocket, and 1/2" HD. The Foreman comes with a 3/8" step-drill bit and hardened guide,
while the accessory Micro Pocket and HD bits and guides are sold separately. Triple your work output or simply get it done faster with the Kreg Foreman. Powerful 110 volt, 5.0 amp, 2,800 rpm motor for fast drilling. 14" x 23-1/2" cast aluminum tabletop
provides ample work space. Adjustable fence and depth stop for precise pocket depth in 1/2" to 1-1/2" material. Dust collection port on the base connected internally to catch chips at the source.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Grid punch for 1/8 inch rivets, punches 9/16 inch grid.
• For use when installing suspended ceiling grid. • Use on connect grid cut at non-standard lengths. • Punches holes 1/8 inch rivets. • Punches all grid widths. |
This item can NOT be shipped to these states CA
MAYHEW SELECT(TM) CARDED LINE-UP PUNCHES Used to align holes through which rivets, - pins or bolts will be inserted Not for use when driving pins, rivets or bolts Shot-blasted finish Made in the U.S.A. 43952 5/32 IN. X9 IN. LINE UP PUNCH SIZE:5/32" x 9" DESC:3/8" Hex Body |
HANDYMAN SCRATCH AWL
Alloy steel bar anchored in hardwood handle
Bar finished bright & smooth
Rust resistant plated finish
69-122 STAN SCRATCH AWL
SIZE:3/16x 6-1/16"
|
NAIL SET
Square head, round knurled body
Alloy steel hardened & tempered
Tips are cupped & chamfered
58-113 3/32 NAIL SET
SIZE:3/32"
|
CAT5/CAT6 Punch Down Tool - This Impact Punch Down Tool makes tough jobs easier.CAT5/CAT6 Punch Down Tool features include:
Below is more info on our CAT5/CAT6 Punch Down Tool Description: Punch Down Tool with 11 blade This item does not ship to APO/FPO addresses. |
3-PC. NAIL SET
Contains sizes: 1/32", 2/32", 3/32"
Made of heat treated alloy steel
Accurately sets nails for molding
Lifetime warranty
NSK 3PC NAIL SET
|
NAIL SET
Square head, round knurled body
Alloy steel hardened & tempered
Tips are cupped & chamfered
58-112 2/32 NAIL SET
SIZE:2/32"
|
This item can NOT be shipped to these states CA
MAYHEW SELECT(TM) BULK LINE-UP PUNCHES Used to align holes through which rivets, - pins or bolts will be inserted Not for use when driving pins, rivets or bolts Shot-blasted finish Made in the U.S.A. Bulk Pack 72012 3/16X10 IN. LINE UP PUNCH SIZE:3/16" x 10" DESC:1/2" Hex Body |
This item can NOT be shipped to these states CA
MAYHEW SELECT(TM) CARDED LONG PIN PUNCHES Used to drive out & remove already loosened - pins & keys after initial solid punch movement Not for use on seized pins or keys Shot-blasted finish Made in the U.S.A Carded 42402 3/16 IN. X6 IN. PIN PUNCH SIZE:3/16" x 5-1/4" BODY-SIZE:5/16" Hex |
HARDWOOD HANDLE SCRATCH AWL
Alloy steel blade runs through handle
Blade securely fastened to ferrule & cap
Contoured, hardwood fluted handle
6-1/2" overall length, 3-1/2" blade
818 SCRATCH AWL
|
METAL TRIM NAIL PUNCH Drive trim nails without denting or marring All steel nose and aluminum tail piece Directs weight of this punch to working end Accommodates up to 1-1/4" standard trim nails Nose fits into 1/2" J-channel TNP2S METAL TRIM NAIL PUNCH SIZE:8"
|
Hole Punch Kit - Manual Ratcheting Tool - Manual Hole Punch Kit for Cutting Holes up to 2" Diameter.Hole Punch Kit - Manual Ratcheting Tool features include:
Below is more info on our Hole Punch Kit - Manual Ratcheting Tool Description: Manual Hole Punch Kit 1/2" Thru 2"Box Qty: 1 This item does not ship to APO/FPO addresses. |
This item can NOT be shipped to these states CA
MAYHEW SELECT(TM) BULK LINE-UP PUNCHES Used to align holes through which rivets, - pins or bolts will be inserted Not for use when driving pins, rivets or bolts Shot-blasted finish Made in the U.S.A. Bulk Pack 72013 5/16 X 12 LINE-UP PUNCH SIZE:5/16" x 12" DESC:5/8" Hex Body |
This item can NOT be shipped to these states CA
9 PIECE PILOT PUNCH KIT Contains following sizes of pilot punches: sizes 1/16", 5/64", 3/32", 1/8" - 5/32", 3/16", 7/32", 1/4", 5/16" Includes vinyl storage pouch 62252 9PC PILOT PUNCH KIT W/PO |
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |