Package Contents:
This item cannot be shipped to APO/FPO addresses
|
ADJUSTABLE VENT CAPS
Non-clogging, positive draft design
For chimney, flue or hot stack installation
Clamp fitting adjustable for all standard sizes
Aluminum
7090 LESLIE VERSACAP 9
SIZE:6-7/8"-9"
|
DURAPLUS ALL-FUEL CHIMNEY CAP
Required where chimney pipe terminates above -
the roof line
Removable screws allow for cleaning of chimney -
and spark arrestor screen
Made of stainless steel
8DP-VC 8 IN. CHIMNEY CAP
SIZE:B= 14" C=8"
DESC:For 8" Vent
|
Support tabs inside the base sit on the flue tile and the cap is then secured with screws through strip-proof weld nuts.
Note: These caps are not for use on metal pre-fabricated chimneys. Use HomeSaver Guardian caps or HomeSaver Factory-Built Chimney C |
TYPE B GAS VENT DURACAP
DuraCap for use with Type B gas vent systems
Required where pipe terminates above the -
roof line
Use for vertical installations only
Galvanized steel
8GVDC 8 IN. DURA CAP GAS VENT
SIZE:8"
|
Stainless Steel Cap Mounting Brackets, Set Of 12
|
AMERIVENT¨ TYPE BGAS VENT CAPS The Ameri-Cap is the first engineered vent cap to gain recognition across the country for its performance. Millions of them are now installed on homes and business structures to protect against wind conditions that can cause waste gases to spill back into the structure through the appliance draft hood. The Ameri-Cap is UL listed and its patented design of ports and baffles keep rain and debris out of the vent. Finally, Ameri-Caps permit termination of vents at the minimum height necessary above the roof surface. For use as a ventilation cap as well as Type B Gas vent termination. SIZE 6 Package Shipping Size 7.00 x 9.00 x 9.00 (not product dimensions)
|
ADJUSTABLE VENT CAPS
Non-clogging, positive draft design
For chimney, flue or hot stack installation
Clamp fitting adjustable for all standard sizes
Aluminum
3050 LESLIE VERSACAP 5
SIZE:2-7/8"-5"
|
Gelco has long been recognized as the premier multi-flue cap in the chimney industry.
Choose one of Gelco+s Fully Assembled multi-flue caps. Premium Gelco quality in a cap ready to mount right out of the box. Available in 304-alloy stainless steel, an |
ADJUSTABLE CHIMNEY CAP
Adjusts to fit most popular sizes
Use on exposed tile
Mesh design provides for superior drafting
Reduces clogging, soot & creosote build-up
Epoxy powder finish
8" O.D. round through 12" O.D. round
Adjusts from 8" x 8" through 13" x 13" overall
SCCA ADJUSTABLE CHIMNEY CAP
|
ADJUSTABLE VENT CAPS
Non-clogging, positive draft design
For chimney, flue or hot stack installation
Clamp fitting adjustable for all standard sizes
Aluminum
5070 LESLIE VERSACAP 7
SIZE:4-7/8"-7"
|
HomeSaver's single-flue caps are available in +" rugged mesh. Some galvanized sizes are available in 5/8" (California) mesh. HomeSaver single flue caps feature picture frame embossing on the lid as well as a shallow channel base for added strength. For th
|
CHIMNEY CAP
Install securely using only a screwdriver
Welded-wire spark-arresting 1/2 x 1/2 mesh
Reduces clogging, soot & creosote build-up
Meets all fire codes
Heavy-duty 24 gauge steel top
Epoxy powder finish-fits following tile O.D.
Rectangular:11-1/2x16-1/2 - 13-1/2x18-1/4
Oval:12-1/2x16-1/2 - 13-1/2x18-1/4"
CC1318 13 X 18 CHIMNEY CAP
SIZE:13x 18"
|
Flue Gripper Galvanized Legs, Set Of 4
|
Round termination features its own built-in spark arrestor. Protects against rain, debris and birds entering chimney.
Size In=8
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Tight, friction-fit installation allows this cap to slip down securely inside the chimney. It fits virtually any brand of factory-built chimney. Some brands will, however, differ in their inner dimensions by a few fractions of an inch.
The top and |
Gelco has long been recognized as the premier multi-flue cap in the chimney industry.
Choose one of Gelco+s Fully Assembled multi-flue caps. Premium Gelco quality in a cap ready to mount right out of the box. Available in 304-alloy stainless steel, an |
HomeSaver's single-flue caps are available in +" rugged mesh. Some galvanized sizes are available in 5/8" (California) mesh. HomeSaver single flue caps feature picture frame embossing on the lid as well as a shallow channel base for added strength. For th
|
4" x 6-5/8" DuraVent DirectVent Pro Horizontal Windguard For Rain Cap
|
Support tabs inside the base sit on the flue tile and the cap is then secured with screws through strip-proof weld nuts.
Note: These caps are not for use on metal pre-fabricated chimneys. Use HomeSaver Guardian caps or HomeSaver Factory-Built Chimney |
6" DuraVent DuraPlus Tee With Cover, Stainless Steel
|
DURAPLUS ALL-FUEL CHIMNEY CAP
Required where chimney pipe terminates above -
the roof line
Removable screws allow for cleaning of chimney -
and spark arrestor screen
Made of stainless steel
6DP-VC 6 IN. CHIMNEY CAP
SIZE:B= 12" C= 7"
DESC:For 6" Vent
|
Gelco has long been recognized as the premier multi-flue cap in the chimney industry.
Choose one of Gelco+s Fully Assembled multi-flue caps. Premium Gelco quality in a cap ready to mount right out of the box. Available in 304-alloy stainless steel, an |
DuraTech sets the standard in performance. The ThermalTech blanket insulation in the lengths, elbows, and tees eliminates hot spots + no shifting, settling, or voids. In the event of a creosote fire, this insulation lets the chimney liner expand outward a
|
SuperPro by Selkirk has inner and outer walls of 304-alloy stainless steel. The mineral wool insulation is formulated to reduce the likelihood of corrosion.
Components, such as flashings, have a coating which has twice the corrosion resistance of galv |
DuraChimney II is an exceptional factory-built alternative to pre-fabricated masonry chimneys. DuraChimney II is a unitized, lightweight design which eliminates the need for field assembly of pipe sections, allowing for faster installation. DuraChimney II is designed to stay cool on the outside, to provide a hot draft on the inside and to provide a fire-safe design that protects both the chimney and the building. The double-wall, air-cooled design allows the chimney to expand both radially and lengthwise under high temperatures.
|
TYPE B GAS VENT DURACAP
DuraCap for use with Type B gas vent systems
Required where pipe terminates above the -
roof line
Use for vertical installations only
Galvanized steel
7GVDC 7 IN. DURA CAP
SIZE:7"
|
HomeSaver's single-flue caps are available in +" rugged mesh. Some galvanized sizes are available in 5/8" (California) mesh. HomeSaver single flue caps feature picture frame embossing on the lid as well as a shallow channel base for added strength. For th
|
AMERIVENT¨ TYPE BGAS VENT CAPS The Ameri-Cap is the first engineered vent cap to gain recognition across the country for its performance. Millions of them are now installed on homes and business structures to protect against wind conditions that can cause waste gases to spill back into the structure through the appliance draft hood. The Ameri-Cap is UL listed and its patented design of ports and baffles keep rain and debris out of the vent. Finally, Ameri-Caps permit termination of vents at the minimum height necessary above the roof surface. For use as a ventilation cap as well as Type B Gas vent termination. SIZE 4 Package Shipping Size 11.40 x 12.64 x 18.79 (not product dimensions)
|
Gelco+s single-flue caps are available in +" rugged mesh. Some sizes are available in 5/8" (California) mesh. Gelco+s signature cross-braced lid and deep double channel base give it superior strength so you know your customer is getting the best chimney c
|
Friction fit to inside of liner. Can be used with a collarplate or use with storm collar, top clamp, and top plate to complete system.
|
Friction fit to inside of liner. Can be used with a collarplate or use with storm collar, top clamp, and top plate to complete system.
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |