This single-flue cap is used primarily for spark protection as well as repelling critters. This cap will help with keeping sparks under arrest and small animals out with an easy-to-install cover that will last for a long time.

Dryer Vent To ButtonLok Adaptor.

10" Spring W/ButtonLok Male On One End & ButtonLok Female On The Other End.

Viper Adaptor Male M10/Male B/L.

Large ButtonLok Female To Small ButtonLok Male Adaptor.

• Four 36" long flexible extension rods for the LintEater(R);

Cleaning Tool Adaptor For Prokleen/Rokleen Rods With Female ButtonLok. All rods and components click together with no screwing whatsoever. Then they stay locked together until you detach them, because they cannot come unscrewed. Detaching is done easily, with a push of the thumb — even gloved hands can depress these large, spring-loaded buttons. You’ll absolutely love the speed and security of ButtonLok.

3" Propeller Brush On A 10" Spring With ButtonLok Female End.

12" X 16" Rectangular ButtonLok Hd RoVac series flat wire chimney brush. Ideal for hard to clean situations where a more durable scraping brush is required. Since these bristles retain their shape, the Flat Wire Brush is recommended for chimney cleaning performed from the roof.

The Female universal poly rod end (2211) All rods and components click together with no screwing whatsoever. Then they stay locked together until you detach them, because they cannot come unscrewed. Detaching is done easily, with a push of the thumb — even gloved hands can depress these large, spring-loaded buttons. You’ll absolutely love the speed and security of ButtonLok. The RoVac rods come standard with ButtonLok connectors. But you can also get ButtonLok connectors that screw onto the ends of your fiberglass or universal poly rods — just drill and pin with one pop rivet and you’re good to go. Works in conjunction with part 2210.

Guide Ball For #7265.

• Captures loosened lint from the dryer vent while cleaning ;• Zippered opening for easy cleaning & disposal of lint ;• Easy installation & handling ;• Professional quality & design ;• Includes stainless steel clips & internal drawstring for secure attachment to dryer vent hood;

Kit includes: ;• Two 18" flexible extension rods ;• Self-feeding auger brush for cleaning vent ;• One 2 1/2" dia lint trap brush with 36" reach;• Screw on connector;

This item can NOT be shipped to these states CA
DRY CREOSOTE REMOVER For airtight stoves Modifies soot/creosote deposits as they form Use weekly on fire helps prevent buildup Catalytic action reduces accumulated deposits Not a substitute for thorough chimney cleaning 97 1LB CREOSOTE REMOVER SIZE:1 Lb.

Older dryer vents blow open and stay open, allowing cold air to enter. This vent closure is protected from the elements, eliminating this problem. It can be painted to match the house. It shouldn+t be used on any dryer vent run over 20' long.

This item can NOT be shipped to these states CA
GAS LOG SOOT REMOVER Powerful spray-on cleaner that removes soot - build-up from gas logs Makes logs look new again Will not harm burners or discolor logs Won't clog gas orifices Not for use on white gas logs like "birch" 570-6 16OZ GAS LOG CLEANER SIZE:Pint

This item can NOT be shipped to these states CA
KLEEN FLUE ROD KIT Fiberglass rods with 1/4" threading Kit contains six 3 ft. rods for total of 18 ft. KRK-18 18 FT. FIBERGLASS ROD KIT SIZE:18 Ft.

Cre-Away can be used to modify third-degree creosote by converting it into a more brittle state that has a different expansion/contraction rate than the flue it is attached to. During heating and cooling cycles, the treated creosote loses its adhesive properties so it can be more easily removed. Creosote and soot build-up in fireplaces or wood stove chimneys can be a fire hazard if it is not properly cleaned and maintained. All chimneys should be inspected and/or cleaned annually by a qualified chimney sweep. Cre-Away is a four-component powder that safely and effectively modifies glazed or third-degree creosote so that it can be more easily removed by chimney sweeping. First, a reactive agent neutralizes the slightly acidic creosote, making it less corrosive to metal components and less flammable. Second, a dehydrator absorbs the oils and moisture contained in some forms of creosote. Third, a combustion inhibitor helps reduce the chance of chimney fires. Finally, a magnesium catalyst helps break down third degree creosote when the flue is heated by normal use. The catalyst in Cre-Away turns creosote into a char that can be more easily removed. Cre-Away works best when the flue gases are heated to about 600°F (surface stove pipe temperature about 300°F). Apply Cre-Away directly to the flue (not into the fire) using the one-pound applicator bottle. Cre-Away can be used to modify third-degree creosote by converting it into a more brittle state that has a different expansion/contraction rate than the flue it is attached to. During heating and cooling cycles, the treated creosote loses its adhesive properties so it can be more easily removed. Creosote and soot build-up in fireplaces or wood stove chimneys can be a fire hazard if it is not properly cleaned and maintained. All chimneys should be inspected and/or cleaned annually by a qualified chimney sweep. NOT RECOMMENDED FOR USE WITH WOOD STOVES HAVING CATALYTIC COMBUSTORS UNLESS PUT IN BYPASS MODE. If bypass mode is not available, use ACS Anti-Creo-Soot Liquid to treat creosote buildup. Apply during the heating season to modify glazed creosote, making it easier to remove. Apply Cre-Away after every cleaning to make any remaining stubborn deposits safer and to neutralize the acidity and odors from the creosote.

RoVac Dryer Vent Y Adaptor to use take off your transition duct and hose clamp it to the 4" part of the Y. Then slide your 3" gray ROVAC hose onto the 3" connector. The brush and rods can then be pushed right through the slit in the seal of the upper Y branch.

This item can NOT be shipped to these states CA
CHIMNEY SWEEP ROUND WIRE BRUSH Wire chimney cleaning brush has stiff, - oil-tempered spring wire bristles Regular construction utilizes an open, - single spiral design with 6" of fill Plated shaft and 1/4" threading for easy - coupling with fiberglass rods or pull rings Individually packaged 16410 10 IN. ROUND CHIMNEY BRUSH SIZE:10"

Use FlashSeal Fabric with FlashSeal Elastomeric Flashing Sealant for added strength and stability to your flashing repairs.

2 Gallon Tub of professional strength dry creosote reducer. Reduces build-up to make brushing easier in your airtight stoves and fireplace inserts. Enhances your fireplace or stove efficiency by increasing air flow.

• Recommended for cleaning the glass of any type of wood-burning appliance.
• Dimensions: 2.5" W x 2.5" L x 9.5" H

These crown forms provide for 3-1/2" of concrete, have a built-in drip edge, allow a 2" overhang to reduce freeze/thaw damage, and can be reused many times. Kits contain six Styrofoam form sides, each 5' 4" in length. A cardboard template for 45° cutting, support wires, and instructions are also included.

This item can NOT be shipped to these states CA
CHIMNEY SWEEP ROUND WIRE BRUSH Wire chimney cleaning brush has stiff, - oil-tempered spring wire bristles Regular construction utilizes an open, - single spiral design with 6" of fill Plated shaft and 1/4" threading for easy - coupling with fiberglass rods or pull rings Individually packaged 16406 6 IN. ROUND CHIMNEY BRUSH SIZE:6"

Stove Bright Glass Cleaner is specially formulated to remove creosote and other deposits from the glass in wood and pellet stove doors. Cleans creosote from wood burning stove, fireplace, pellet, and furnace glass.

This item can NOT be shipped to these states CA
STANDARD CHIMNEY BRUSH RODS .370 standard fiberglass rod Fits chimney sweep brushes 1/4" threading 10624 4 FT. FIBERGLASS BRUSH ROD SIZE:4 Ft. COLOR:Brown

This chimney brush is perfect for sweeping prefab chimneys. Use a brush that is 2" larger than the flue size; this will make sure there is constant contact while cleaning between the brush and the flue. Use adaptor #104983 to connect to 3/8" pipe thread fiberglass rods (sold separately).

Flexible, bends easily to brush hard to reach areas of the chimney. 1/4" NPT Size In=72 This item cannot be shipped to APO/FPO addresses. Please accept our apologies

This item can NOT be shipped to these states CA
CHIMNEY SWEEP ROUND WIRE BRUSH Wire chimney cleaning brush has stiff, - oil-tempered spring wire bristles Regular construction utilizes an open, - single spiral design with 6" of fill Plated shaft and 1/4" threading for easy - coupling with fiberglass rods or pull rings Individually packaged 16408 8 IN. ROUND CHIMNEY BRUSH SIZE:8"