• Improves taste and smell of drinking water by removing Chlorine and sediment
  
• Filters to 150 microns
  
• Last up to 120 days
  
• RV and marine approved
  
• CSA low lead content certified and complies with California's AB1953 and Vermont Act 193 Low Lead Laws

Purasan™ EX Treatment System - Pressurized Fresh Water - 12v

**HAZMAT CAN ONLY SHIP GROUND**

Raritan's onboard sewage treatment device is legal for use in any area not considered a Federal NDZ. It neutralizes waste, making it sanitary and safe for boaters and marine life. Great design for all toilets in salt, fresh or brackish water.

The Purasan EX is a flow through system which means that the toilet is connected to the tank and the tank is connected to the thru-hull. With each flush of the toilet the waste enters the tank where a small amount of disinfectant is introduced to neutralize the waste. At the same time an equal amount of treated waste is forced out of the tank and overboard.

Improvements:

• Control indicates when tablets are empty
• Dispenser can be mounted at any height
• Solution drained with air pump, lengthens tablet life
• No metering valve to control water, now fully programmable
• Table packaging eliminates Hazmat fees

Benefits:

• US Coast Guard approved Type I Marine Sanitation Device for vessels up to 65 feet in length - can be used with most marine toilets
• Treats waste in fresh and brackish water applications
• Electronically controlled, two minute treatment cycle
• One Purasan™ can be installed with two toilets
• Low power consumption
• Neutralizes bacteria in wastewater
• Quiet operation
• Easy to clean and maintain
• Alleviates need for holding tanks
• Each unit is assembled by hand, individually tested and backed by Raritan's 1-year Limited Warranty and legendary technical support team

• Conversion Applications: PHII, PH, PHC, CPII and CP Model Toilets
  
• Converts Toilet Water Supply from Raw Water to Pressurized Fresh Water
  
• Kit Includes Everything Required for Water Source Changeover

• Pump Assembly (Model # 25200)
  
• Flapper Valve Assembly (Model # 1228CW)
  
• Spud Assembly (Model # 1236W)
  
• Atmospheric Breaker cover (Model # 168006)
  
• Atmospheric Breaker (Model # 221300)
  
• Breaker O-ring (Model # 221331)
  
• Pump Cover (Model # 25214)
  
• Handle Assembly (Model # 25221)
  
• Handle screw key (Model # FT001)
  
• Hose inlet 1/2" (Model # PLF-50P)
  
• 1/4" x 20 x 1" screw (Model # F099)
  
• Flapper valve washer (Model # 1226C)
  
• Nut 1/-20 Hex 18-8 SS (Model # 1226B)
  
• Nylon nut (Model # 25309)