This item can NOT be shipped to these states CA
DRYWALL SANDER VAC For use with wet/dry shop vacuum cleaners Unique adjustable suction valve Designed for use with sanding screen 6" flexible hose adapter Fits 1-1/4" hose FDW6600-U DRYWALL SANDER VAC |
POLE SANDER - LIGHTWEIGHT
Sand ceilings & walls with both feet on the floor
Structural foam with stainless steel wire clips
Fits any mop or broom stick
Lightweight
New integral molded pad
UPS ALLWAY POLE SANDER
|
Sands both inside seams of a drywall corner; the light-weight, 90 degree design provides a smooth edge with less risk of wall damage commonly caused by sanding each side separately; works with 8" x 7" hook and loop sanding sheet.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
DRYWALL SANDING SPONGE
For sanding drywall & plaster during spot repair
Two sanding grades on one sponge
Rinse & reuse
9093DC DRYWALL SAND SPONGE
SIZE:3-3/4x 2-5/8x 1"
GRIT:Fine/Medium
|
CORNER DRYWALL SPONGE
Medium grit
Extra firm
Dual side sanding capabilities
Coated 2 sides
3-3/4" x 7" x 4-1/2"
01715 CORNER DRYWALL SPONGE
|
Homax 5 Piece Drywall Taping Kit contains one each of the following essential drywall tools and accessories: 10” Mud Pan, 3-in-1 Drywall Knife, Corner Tool, Hand Sander, 3” Drywall Knife. Constructed of heavy-duty, lightweight, high-impact polystyrene. Ea
sy-to-clean and economical.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
EXTRA LARGE PAINT & DRYWALL SPONGE
Oversized extra firm sponge
Easy sanding of entire drywall joint surface
Large size is easy to hold
Coated 4 sides
Size: 3-5/16" X 9" X 1"
Fine/medium grit
00944 LARGE DRYWALL SPONGE
|
DRYWALL SCREENS (PRO-PAK)
Waterproof & can be rinsed for reuse
Sand drywall joints, patching compounds & plaster
Made of sharp, silicon carbide mineral
Long-lasting performance
Open mesh cloth backing reduces loading
Allows both sides to be used
10 screens per pack
99436NA 220 DRYWALL SCREEN
SIZE:4-3/16x11-1/4"
GRIT:220
|
ECONOMY SERIES POLE SANDER HEAD
For sanding ceilings & walls from floor level
3-1/4" x 9" yellow polypropylene head with -
foam pad
Clamps hold abrasive sheets firmly
Standard acme thread - use with any standard -
broom handle or extension pole
Carded
09046 POLE SANDER HEAD
|
Allows drywall sanding without harmful dust. Fits all shop type vacuum cleaners. Features 'Easyclamp' system for faster, easier abrasive loading. Universal thread for use with any extension pole. Kit Includes: Pole sander; 6' Flexible Hose, Coupling Ada
pters (in 2 sizes) & Sheet of 3-1/4" x 9" Medium Grit, Reversible Drywall Sandscreen.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
DETAIL AREA ANGLED SANDING SPONGE
For sanding drywall & plaster spot repair
One edge is angled to reach into corners
For wet or dry sanding
Rinse and reuse
Dimensions: 4-4/8"x 2-7/8"x 1"
CP042 FINE/ANG DRYWALL SPONGE
|
DRYWALL SANDER PAD & DISCS Replacement sander pad and discs for - 7800 Porter Cable drywall sander Includes 9" foam pad and 5 abrasive discs Durable aluminum oxide grain for longer disc - life & higher removal rates Premium foam pad for even material removal - and long pad life 77105 SANDER PAD & 100G DISCS SIZE:9" DESC:100 Grit
|
DRYWALL SANDING SCREEN
Fits most drywall sanding tools
Made with sharp silicon carbide mineral
Features an open mesh cloth backing
Waterproof & can be rinsed for reuse
2 sheets per package
9090 4-3/16X11 MED SAND SCREEN
SIZE:4-3/8x11"
GRIT:Medium
|
3-1/2" x 3-1/2" x 6-1/2" - Carded
Grit=80/120
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
DRYWALL SCREENS (PRO-PAK)
Waterproof & can be rinsed for reuse
Sand drywall joints, patching compounds & plaster
Made of sharp, silicon carbide mineral
Long-lasting performance
Open mesh cloth backing reduces loading
Allows both sides to be used
10 screens per pack
99438NA 120 DRYWALL SCREEN
SIZE:4-3/16x11-1/4"
GRIT:120
|
DRYWALL SANDING SCREEN
Fits most drywall sanding tools
Made with sharp silicon carbide mineral
Features an open mesh cloth backing
Waterproof & can be rinsed for reuse
2 sheets per package
9089 3M DRYWALL SANDING SCREEN
SIZE:4-3/8x11"
GRIT:Fine
|
9" HOOK & LOOP SANDING DISCS
Aluminum oxide abrasive 9" discs for ultra -
smooth finish of drywall compound
Anti-clog coating decreases loading and -
promotes optimal dust collection
Rugged hook & loop fastening assures quick -
and easy disc changes
02464 9 IN. 120G HK&LP SAND DISC
SIZE:9"
DESC:120 Grit
|
9" HOOK & LOOP SANDING DISCS
Aluminum oxide abrasive 9" discs for ultra -
smooth finish of drywall compound
Anti-clog coating decreases loading and -
promotes optimal dust collection
Rugged hook & loop fastening assures quick -
and easy disc changes
02463 9 IN. 150G HK&LP SAND DISC
SIZE:9"
DESC:150 Grit
|
WALLSAND DRYWALL SCREEN
For sanding drywall compound & patching -
plaster prior to priming
Waterproof screen resists clogging because -
of its open mesh design
Just rinse and reuse
Size: 4-3/16" x 11-1/4"
02049 10PK 220G DRYWALL SCREEN
GRIT:220 Very Fine
QTY/PACK:10
|
DRYWALL SANDING SHEET
Fit most drywall sanding tools
Made with sharp silicon carbide mineral
Designed for sanding drywall joints
Also for patching compounds & plaster
4-3/16 x 11" sheets
5 sheets per package
9091 4-3/16X11 FINE SANDING ST
GRIT:Fine
|
WALLSAND DRYWALL SCREEN
For sanding drywall compound & patching -
plaster prior to priming
Waterproof screen resists clogging because -
of its open mesh design
Just rinse and reuse
Size: 4-3/16" x 11-1/4"
02530 2PK 150G SAND SCREEN
GRIT:150 Fine
QTY/PACK:2
|
DRYWALL SANDING SPONGE
Abrasive side for wet sanding
Sponge side for removing residue
END
Virtually dustless drywall sanding
Cleans easily, reusable
Dimensions: 9" x 4-1/2" x 1-3/4"
DWS467-3 DRYWALL SANDING SPONG
|
DRYWALL SANDING SPONGE
For sanding drywall & plaster during spot repair
Two sanding grades on one sponge
Rinse & reuse
9095NA LG DRYWALL SAND SPONGE
SIZE:4-7/8x 2-7/8x 1"
GRIT:Fine/Medium
|
DRYWALL JOINT SANDING SPONGE
Sized just right for large areas
Sponge is 3" x 10" x 1"
7312-10 DRYWALL SANDING SPONGE
DESC:For Fine/Medium
|
ALUMINUM POLE SANDER HANDLE
48" long durable aluminum handle with steel -
cap for setting nails
Soft grip sleeve for extra comfort
Handle only
Replacement pole for G15354 sander head only
G05036 POLE SANDER HANDLE
SIZE:48"
|
ECONOMY DRYWALL HAND SANDER
For sanding drywall joints
Soft grip handle
Lightweight high-visibility yellow polystyrene -
with 3-1/4" x 9-3/8" foam sanding pad
Clamps firmly hold abrasive sheets for sanding
09157 DRYWALL HAND SANDER
|
WALLSAND DRYWALL SCREEN
For sanding drywall compound & patching -
plaster prior to priming
Waterproof screen resists clogging because -
of its open mesh design
Just rinse and reuse
Size: 4-3/16" x 11-1/4"
68319 10PK 80G DRYWALL SCREEN
GRIT:80 Coarse
QTY/PACK:10
|
PLASTIC POLE SANDER HEAD
Use for sanding drywall joints
Quick change locking clamps
Made of molded plastic
For use with die-cut of half sheet of standard -
sand paper
260P PLASTIC POLE SANDER HEAD
|
9" HOOK & LOOP SANDING DISCS
Aluminum oxide abrasive 9" discs for ultra -
smooth finish of drywall compound
Anti-clog coating decreases loading and -
promotes optimal dust collection
Rugged hook & loop fastening assures quick -
and easy disc changes
56659 9 IN. 220G HK&LP SAND DISC
SIZE:9"
DESC:220 Grit
|
WALLSAND DRYWALL SCREEN
For sanding drywall compound & patching -
plaster prior to priming
Waterproof screen resists clogging because -
of its open mesh design
Just rinse and reuse
Size: 4-3/16" x 11-1/4"
04749 10PK 120G DRYWALL SCREEN
GRIT:120 Medium
QTY/PACK:10
|
DRYWALL SHEETS (PRO-PAK)
Sand drywall joints, patching compounds & plaster
Made with a sharp, synthetic mineral
Long-lasting performance
Pre-cut & die-cut - fits most sanding tools
25 sheets per pack
99431NA 150C DRYWALL SHEET
SIZE:4-3/16x11-1/4"
GRIT:150C
|
PRO POLE HAND SANDER
Anti-flip design universal joint with -
low center of gravity
Reinforced die-cast aluminum base plate -
prevents "bowing"
Quick-release clamp design for fast changes
48", durable aluminum handle with steel cap -
for setting nails
Soft gripping sleeve for extra comfort
G05022 PRO POLE SANDER
SIZE:9-1/4" x 3-1/4"
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |