SKIL 7" WET TILE SAW
Stainless steel top resists corrosion
Adjustable rip fence with miter gauge -
ensures accurate straight and miter cuts
Bevel cuts tile from 0 to 45 degrees
Water reservoir keeps blade cool and helps -
minimize dust and debris
Includes 7" diamond blade and blade guard
3540-02 7 IN. TILE SAW
SIZE:7"
|
DCS376B 20V DUAL HAND BANDSAW
|
SKIL 16" SCROLL SAW
1.2 Amp motor with electronic variable speed
Integrated dust removal system
Articulating LED work light
Tilting 16" x 10" work table
16" throat
Comes with dust port & on-tool blade storage
3335-07 16 IN. SCROLL SAW
SIZE:16"
|
SKIL 9" BAND SAW
Powerful 2.5 Amp motor - 9" band saw
Has rip fence for straight & accurate cuts
Miter gauge guide work when making cross cuts
Articulating LED work light for better view -
of work piece and cut line
1-1/2" dust port keeps work area clear of dust
Rack & pinion table for angle/height adjustments
Easy tool free blade changes
3386-01 9 IN. BAND SAW
SIZE:9"
BLADE:59-1/2" x 6 TPI
|
Double parallel link arm design dramatically reduces vibration and noise, for extremely accurate cuts. Exclusive tool-free blade clamps, On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front
upper arm. Arm design pivots from the back of the saw to the front and lifts so blade can be easily threaded through the material for inside cuts. Unique arm design keeps the blade perpendicular to the work. Oversized, cast-iron table provides excellent
material support and bevels 45 degrees left and right. Specs: Motor 1.3 amp rating, 120V AC. 400-1,750 cutting strokes per minute. Table size 16" x 23-3/4". Weighs 56 lbs. Meets OSHA standards, CSA approved and U.L. Listed. Stand Not Includ
ed.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Self lubricating for maximum wear resistance, no oiling required. With all ball and bearing construction for durable operation, dynamically balanced and ball bearing mounted armature. High torque worm gear and chain drive mechanism. Center of gravity is d irectly over blade; reducing operator fatigue. Saw has open line of sight and a blade tightening lever for quick blade changes. Specs: 2 speeds; no load 250 and 350 surface feet per minute. 120 volts ac/dc. 6 amps at 350 sfm and 5 amp at 250 sfm., length 19-3/4", weighs 17-1/2". Workpiece capacity is 4-3/4" round stock, 4-3/4" x 4-3/4" rectangular stock. Includes: saw and steel carrying case. Rental. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
No Load Speed 890/min
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
H-D 14" CHOP SAW
14" saw w/ Quick-change Keyless blade change
Powerful 15.0 Amp/5.5 HP motor - 4,000 rpm
Quick-Change blade change system allows-
for blade changes without using a wrench
Quick-Fence - tool-free 45 deg. adjustable fence
Quick-Lock vise allows for fast clamping of work
Soft start extends gear and motor life
Includes 14" wheel, wrench, bolt and washer
D28715 14 IN. ABRASIVE CHOP SAW
SIZE:14"
ARBOR:1"
|
SKIL 7" WET TILE SAW
Stainless steel top resists corrosion
Adjustable rip fence with miter gauge -
ensures accurate straight and miter cuts
Bevel cuts tile from 0 to 45 degrees
Water reservoir keeps blade cool and helps -
minimize dust and debris
Includes 7" diamond blade and blade guard
3540-02 7 IN. TILE SAW
SIZE:7"
|
Sign Makers Series cuts a variety of material, not just wood. Materials such as aluminum composites, corrugated plastics, foam board, PVC material, wood and much more can now be cut with one machine! We created our Sign Maker's Series to include an accessory package to fit your specialized needs. You no longer need to buy a panel saw AND a mat cutter. Ideal for sheet goods that are less than 1 3/4 inches thick with precision cuts.
A Makita 5007F circular saw on a spinning saw insert offers ease of use when cutting vertically or horizontally. The best dust collection hook ups possible are provided with this machine. The Folding stand is as easy to open & close as a ladder, yet provides complete stability while in operation. For portability and mobility, transport wheels are included. Both the vertical and horizontal measuring systems help to ensure accurate cuts while the stop bar provides the capability to make repetitive cuts. A spring hold down is included to help support thinner material and the Knife cutter insert allows you to cut softer material that would be destroyed by a circular saw. Our patented Accu-Square alignment system assures that your machine will never go out of square and our unique sealed roller bearing system provides for smoother carriage action and tighter tolerances. The Compact models are ideal for customers with space constricted shops. This Full Size models are designed to have more material support to provide ease of use when rip cutting. Want to use V groove Dibond? Add our Floating Router Plate. Want to cut Dibond with no saw dust & have smooth edges? Add our ACM Cutter insert. Standard Equipment: ̣ POWDER COATED FRAME ̣ NICKEL-CHROMED GUIDE TUBES ̣ ACCU-GLIDE SEALED BEARING SYSTEM ̣ STANDARD CARRIAGE SYSTEM ̣ RETRACTION MECHANISM ̣ CORD HOLDER Package Includes: ̣ MAKITA 5007N SAW ̣ SPINNING SAW INSERT PLATE ̣ DUST HOOD, HOSE, BRUSH ̣ FOLDING STAND AND WHEELS ̣ DUAL RIP GAUGE ̣ STOP, BAR AND TAPES ̣ SPRING HOLD DOWN ̣ KNIFE CUTTER PLATE Optional Accessories: ̣ FULL MID-FENCE ̣ FLOATING ROUTER PLATE ̣ FULL BUILDER'S EXTENSIONS ̣ LASER POINTER ̣ ACM CUTTER ̣ PREMIUM BLADES |
10" JOBSITE TABLE SAW
15 amp saw features 32-1/2" rip capacity
Rack & pinion telescoping fence system to make-
adjustments fast, smooth and accurate
Flip over ripping fence for narrow rip cuts
On-board storage for easy accessory access
2-1/2" dust collection port connects to a vacuum
21-7/8" x 26-3/8" table on rolling stand
With CT blade-miter gauge-fence-wrenches & guard
DWE7491RS 10 IN. TABLE SAW
SIZE:10"
COLOR:Yellow/BlackCutting Capacities:3-1/8" @ 90 deg. 2-1/4" @ 45 deg.
|
The Varsity & 1000 Series panel saws includes standard features plus an accessory package we would recommend to most wood workers. This series unit is ideal for customers that need to break down sheet goods that are less than 1 3/4 inches thick with precision cuts.
A Makita 5007F circular saw on a spinning saw insert and the best dust collection hook ups possible are provided with this machine. The Folding stand is as easy to open & close as a ladder, yet provides complete stability while in operation. For portability and mobility, transport wheels are included. The unit dimensions are 125"x15"x88"/400 lbs. Both the vertical and horizontal measuring systems help to ensure accurate cuts while the stop bar provides the capability to make repetitive cuts. Our patented Accu-Square alignment system assures that your machine will never go out of square and our unique sealed roller bearing system provides for smoother carriage action and tighter tolerances. The Compact models are ideal for customers with space constricted shops or need portability. This Full Size models are designed to have more material support to provide ease of use when rip cutting. Want to use a router or a utility knife in this unit? Add our Floating Router Plate or our Knife Plate. Standard Equipment: = POWDER COATED FRAME = NICKEL-CHROMED GUIDE TUBES = ACCU-GLIDE SEALED BEARING SYSTEM = STANDARD CARRIAGE SYSTEM = RETRACTION MECHANISM = CORD HOLDER Package Includes: = MAKITA 5007N SAW = SPINNING SAW INSERT PLATE = DUST HOOD, HOSE, BRUSH = FOLDING STAND AND WHEELS = DUAL RIP GAUGE = STOP, BAR AND TAPES Optional Accessories: = FULL MID-FENCE (MDFC) = FLOATING ROUTER PLATE (FLTR) = FULL BUILDER'S EXTENSIONS (BLEXT) = LASER POINTER (PSLA) |
The powerful 7.4 amp, high-torque motor has maintenance-free, self-lubricating pinion and gear-box assembly. Tilting head allows for precise 45 degree miter cuts and variable height cutting head allows for plunge cutting. Sliding aluminum die-cast cutting
table rips 18" tile and diagonally cuts 13" tiles. Linear bearing and chrome plated guide-bar assembly ensure precise cutting. The frame is single piece zinc-plated steel for rigidity, strength and durability. Hinged blade guard allows for easy blade cha
nges. Motor incorporates the heavy duty on/off MK-Safeswitch and a built-in water pump receptacle. Removable thermoplastic water reservoir, 7" diamond blade, submersible water pump and rip guide are all included. Weight 33 pounds. Dimension
s: 33" long x 19" wide x 20" high. CSA approved.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
The DW744X 10 In. jobsite table saw is the premium jobsite saw in the market, with unparalleled accuracy that comes from the rack & pinion fence adjustment system. In addition, this saw has plenty of power to power through the hardest woods.
|
The C4 model packs all of the features of the full-size panel saws into a portable 5' frame. This panel saw can travel to work sites and fit into shops with limited floor space. The C4 is ideal for cutting 4'x8' sheets of material. The C4 comes standard with a 3 1/4 Hp, 15 amp industrial duty saw motor, adjustable vertical and horizontal rulers, spring loaded counter balance system, quick change from vertical to horizontal cutting, 1 year parts warranty, and a lifetime frame warranty.
|
One-handed cuts. Compact size and lightweight. Powerful motor cuts 3/4" EMT in 3 seconds, up to 150 cuts per charge with the XC battery. 1-5/8" cut capacity for a wide range of applications. LED light highlights the cut line. Blade tension adjustment for
adjustable blade tracking. Performs clean cuts on the most common small diameter metal cutting applications. Dual-latching lower guard that covers the blade outside the active cutting area. 280 sfpm. 11" length. Blade length 27" x 1/2" x .020". Includes:
(1) M12 Cordless Sub-Compact band saw and (1) 18 TPI Sub-Compact portable band saw blade (3 pack).
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Powerful 10.8 amp (1,300 watts) motor delivers the cutting power to cut through granite, porcelain, concrete and other stone materials. Premium 4-3/8" diamond blade allows the user to cut ceramics and stone materials up to 1-3/8" deep wet or dry. At 13,00
0 rpm max no load speed, it provides plenty of speed to complete the user applications. Bevels to 45° for quick and precise angle cuts. 12' water line feeds water to the blade decreasing dust in and increasing blade performance and life. Lock-on button re
duces user fatigue during production cuts. Adjustable depth of cut allows user to cut at various depths. Dust sealed switch protects the unit from contamination and prolongs the life of the unit. Rubber overmold grip provides increased user
comfort and ergonomics. 20mm" Arbor size. Weighs only 6.6 lbs.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
14" CHOP SAW Powerful 15 Amp motor, 3.2 max. HP, 3900 RPM Large cutting capacity to 5" pipe Heavy duty cast iron base Quick release, pivoting vise holds work securely Hardened steel gears Blade arbor lock for easy blade changes Includes 14" abrasive wheel and wrench 6176-20 14 IN. CHOP SAW
|
Compact light weight design for cutting overhead and in tight places. 3-1/4" cut capacity cuts most common materials for electrician, plumber and mechanical cutting applications. Single pass cut on 3" copper, 3" angle iron and 2-1/2" conduit. Tool free ad
justable material shoe quickly adjusts the shoe and allows flush cuts when working with installed materials against walls and ceilings. LED work light illuminates the cut line in dark areas. Blade ejection system lets you quickly change the blade by movin
g the material guide into the up position and depressing the blade ejection button. Drop resistant pulley guard engineered geometries and high impact polymer. Cast aluminum gear case withstands jobsite abuse and maintains gear position. At
only 10-1/4 bls and 18" in length, the M18 cordless Lithium-Ion band saw is ideal for cutting metal in place. 480 sfpm.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Compact 10" job site table say with Site-Pro modular guarding system. Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate. 24" of rip capacity, easily cuts a variety of larger shelving and trim materials. Site-Pro modu
lar guarding system allows for tool free adjustments of the guarding components appropriate for each application. 15 amp 4800 rpm motor quickly rips through hardwoods with ease. On board storage provides easy access to the Site-Pro guarding components and
push stick when not in use. Metal roll cage base offers greater durability than plastic bases. Blade can be adjusted 0-45 degrees for bevel applications. Weighing only 48 lbs., the table saw can easily be moved on and off the job. Rear fee
t adjust to level the saw on uneven work surfaces. Dust port allows for 2-1/2" vacuum hook up and minimizes clean up. 24T carbide blade enhances cut quality and prolongs blade life. Table coating reduces friction for smoother cutting. Includes: Miter gaug
e, push stick, 10" carbide blade and blade guard. (DW7450 Stand sold separately sku 573.9974)
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
For cutting a variety of ceramic, porcelain, and stone tile, diamond coated edge to cut through hard material, rigid steel frame, slip resistant feet, 7" continuous rim diamond cutting blade, carrying handle, tilting table allows for miter cuts. Adjustabl
e rip guide. Specs: : Motor: 3/4 HP, 3.5 AMPS. 3,600 RPM. Voltage: 120V/60hz. Blade size: 7". Blade arbor: 5/8". Table size: 13" x 14-3/4". Weight: 20lbs. Cutting capacity: Rip: Unlimited. Diagonal: Unlimited. Depth: 1-3/8". Use replacement blade 5542840
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
| 10 in. blade-Ability to rip through 4 in. x 4 in. material in a single pass for fast, accurate cuts-Front and back clamping fence which features integrated T-slots that give ability to hold select accessories | Maximum cut depth of 2-1/4 in. at 45° and 3-1/2 in. at 90° for a variety of useful cuts
|
The new Panel Pro (PRO2K) makes it even easier to handle large sheets of material and cut them accurately. The Panel Pro can be easily stored when not in use because it takes up such a small amount of space. The functionality and portability of the Panel Pro means you can take it right to the job site if preferred. One of the hardest jobs in woodworking is cutting a clean 1/8-inch off the edge of a big panel. Panel Pro easily does it without a problem! Rip cutting large panels lengthwise is another difficult job, especially for one person. Because it supports the panel so well, Panel Pro makes this job easy, accurate, and safe.
New Features Include:
|
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
HAND-MASKER FILM BLADE
Attaches to M3000 & M2000 dispensers
Durable, sharp, stainless steel blade
Protective, plastic blade guard
FB-12 FILM CUT OFF BLADE
SIZE:12"
|
Powerful Hitachi motor, soft grip D-handle for easy operation and trigger switch with lock-off button and spark chute (diversion guard) for operators safety. Quick-locking vise for fast clamping. Spindle lock for easy wheel replacements. Double insulation
. STANDARD EQUIPMENT: 1 cut-off wheel, 1 hex bar wrench. SPECIFICATIONS: 14" wheel diameter, 1" arbor. Capacity: 65mm (2-9/16") bar dia., 120mm (4-47/64") pipe dia., 130mm x 115mm (5-1/8" x 4-1/2") 235mm x 70mm (9-1/4" x 2-49/64") shape steel (W x H). 2,0
00W/AC 230V, 2,400/AC240V (15 AMP/AC120V power input (Full-Load Current for USA). 3,800/min no-load speed. 603 x 318 x 603mm. 36 lbs. tool weight.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
14" ABRASIVE CHOP SAW
Powerful 15 Amp-4.0 Amp motor for performance
Speeds up to 3900 RPM for fast cutting
Durable lightweight (40 lb.) for portability
Oversized wheel guards for debris protection
45 degree miter capacity w/adjustable fence
1" spindle with large spindle lock button
Comes with quick adjust vise clamp, -
14" abrasive when and hex wrench
6177-20 14 IN. CHOP SAW
SIZE:14"
|
SKIL 13 AMP 7-1/4" CIRCULAR SAW
120v 14A saw has 2.3 hp for power & performance
Features: 51 deg. bevel with positive stop at -
45 deg., improved dust blower, power ON -
indicator, spindle lock for easy blade changes -
2-point line of sight for straight line cutting
Safety lock/guarded trigger, anti-snag lower -
guard and rear lever depth adjustment
Includes 20T carbide blade & blade wrench
5080-01 7-1/4 13AMP CIRC SAW
SIZE:7-1/4"
COLOR:Gray/Red
|
|The Milwaukee 2429-21 X C M12™ Sub-Compact Band Saw is the most compact and lightest weight cordless band saw on the market | At less than half the weight and size compared to a traditional deep cut band saw, the M12™ Band Saw provides one-handed power and portability to electricians, maintenance professionals, and other users cutting small diameter materials | The M12™ Band Saw weighs only 6.75 lbs and 12 in in length, making it ideal for overhead or one-handed cutting applications | This powerful saw can cut through 3/4" EMT in only 3 seconds, and will deliver over 150 cuts per charge with the included M12™ RED LITHIUM™ XC High Capacity battery | With a 1-5/8 in x 1-5/8 in cut capacity and low vibration, the M12™ Band Saw performs clean cuts on the most common small diameter metal cutting applications
|
The Varsity & 1000 Series panel saws includes standard features plus an accessory package we would recommend to most wood workers. This series unit is ideal for customers that need to break down sheet goods that are less than 1 3/4 inches thick with precision cuts.
A Makita 5007F circular saw on a spinning saw insert and the best dust collection hook ups possible are provided with this machine. The Folding stand is as easy to open & close as a ladder, yet provides complete stability while in operation. For portability and mobility, transport wheels are included. Both the vertical and horizontal measuring systems help to ensure accurate cuts while the stop bar provides the capability to make repetitive cuts. Our patented Accu-Square alignment system assures that your machine will never go out of square and our unique sealed roller bearing system provides for smoother carriage action and tighter tolerances. The Compact models are ideal for customers with space constricted shops or need portability. This Full Size models are designed to have more material support to provide ease of use when rip cutting. Want to use a router or a utility knife in this unit? Add our Floating Router Plate or our Knife Plate. Standard Equipment: ̣ POWDER COATED FRAME ̣ NICKEL-CHROMED GUIDE TUBES ̣ ACCU-GLIDE SEALED BEARING SYSTEM ̣ STANDARD CARRIAGE SYSTEM ̣ RETRACTION MECHANISM ̣ CORD HOLDER Package Includes: ̣ MAKITA 5007N SAW ̣ SPINNING SAW INSERT PLATE ̣ DUST HOOD, HOSE, BRUSH ̣ FOLDING STAND AND WHEELS ̣ DUAL RIP GAUGE ̣ STOP, BAR AND TAPES Optional Accessories: ̣ FULL MID-FENCE (MDFC) ̣ FLOATING ROUTER PLATE (FLTR) ̣ FULL BUILDER'S EXTENSIONS (BLEXT) ̣ LASER POINTER (PSLA) |
| At only 9-1/2 lbs and 16" in length, the Milwaukee Compact Band Saw is the perfect tool for cutting metal in-place, overhead or in tight spaces | With 3-1/4" cut capacity and low vibration, this saw delivers the cleanest cuts on the most common materials including strut, 2-1/2" conduit, 3" angle iron, 3" copper and threaded rod without ruining the threads | The Compact Band Saw also features a work light, blade ejection system and a tool-free adjustable material guide that allows the user to make cuts flush to ceilings or walls
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |