Browse In:
Home
Sort by
4485 QUICK CHANGE COLLET NUT
4485 QUICK CHANGE COLLET NUT
Online
$7.12 for 1 EA
Retail $9.79
Mfr PN: 4485
Stock: 42
|
QUICK CHANGE COLLET NUT
For Moto Tools 245, 250 & Series 3 & later
For Tools 260, 270, 280 & Series 2 & later
For Freewheelers 275, 285, 370 & 380-
395, 595 & 850
MiniMite 750, MultiPro 770, Handpieces 235 & 237
For Moto Flex Tools 232 & 332
For Chainsavers Tools 241, 246, 277 & 8504
For Flexible Shaft Attachments 225 & 90199
4485 QUICK CHANGE COLLET NUT
DESC:Kit of 3 SizesCollet Nut Kit Contains one each of above collets
|
Online
$7.12 for 1 EA
Retail $9.79
Mfr PN: 4485
Stock: 42
5-4246 4.5 IN. METAL GRINDING WHEEL
5-4246 4.5 IN. METAL GRINDING WHEEL
Online
$3.18 for 1 EA
Retail $3.19
Mfr PN: 5-4246
Stock: 50
|
TYPE 27 METAL GRINDING WHEEL
Metal depressed center grinding wheel
Made with resin bond
Two-ply fiberglass reinforced wheel
Balanced design for long life & efficiency
5-4246 4.5 IN. METAL GRIND WHEEL
SIZE:4-1/2 x 1/8"
ARBOR:7/8
|
Online
$3.18 for 1 EA
Retail $3.19
Mfr PN: 5-4246
Stock: 50
3376-01 4X36 IN. BELT DISC SANDER
3376-01 4X36 IN. BELT DISC SANDER
Online
$177.61 for 1 EA
Mfr PN: 3376-01
Stock: 1
|
SKIL 4" X 36" BELT / DISC SANDER
Two-in-One sanding station with 4" x 36" -
belt sander and 6" disc sander
4.3 Amp - 3,450 RPM motor for performance
Stronger design belt drive and gear system
Cast aluminum table top comes fully assembled
Do bevel sanding from 0 to 45 degrees
Miter gauge for miter & compound sanding
Belt angle adjustment for sanding 0-90 degrees
3376-01 4X36 IN. BELT DISC SANDER
SIZE:4" x 36"
|
Online
$177.61 for 1 EA
Mfr PN: 3376-01
Stock: 1
DW4419 4X1/4X5/8 GRINDING WHEEL
DW4419 4X1/4X5/8 GRINDING WHEEL
Online
$2.98 for 1 EA
Retail $2.99
Mfr PN: DW4419
Stock: 234
|
TYPE 27 H-P DPC METAL GRINDING DISC
High performance depressed center wheels
3 full sheets of fiberglass for durability
For heavy duty cutting and grinding of ferrous-
metals - steel-iron welds-edge grinding
A24R aluminum oxide grit- harder/premium grit
Size= wheel diameter x thickness x arbor hole size
Bulk pack
DW4419 4X1/4X5/8 GRINDNG WHEEL
SIZE:4" x 1/4"
ARBOR:5/8"
|
Online
$2.98 for 1 EA
Retail $2.99
Mfr PN: DW4419
Stock: 234
Weiler 36047 Fine Grade Crimped Wire Wheel Brush, 3/4 in Dia, 0.0104 in Wire, Carbon Steel
Weiler 36047 Fine Grade Crimped Wire Wheel Brush, 3/4 in Dia, 0.0104 in Wire, Carbon Steel
Online
$5.24 for Each
Retail $6.85
Mfr PN: 36047
Stock: 0
|
For use with drills, straight and die grinders. Fine/Medium for light duty; Coarse for general purpose and X-Coarse for heavy duty.
1/4" Shank-Max RPM 22,000 - Carded
Dia In=3/4Wire Type=Fine
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Online
$5.24 for Each
Retail $6.85
Mfr PN: 36047
Stock: 0
9903 TUNGSTEN CARBIDE CUTTER
9903 TUNGSTEN CARBIDE CUTTER
Online
$9.08 for 1 EA
Retail $12.99
Mfr PN: 9903
Stock: 6
|
TUNGSTEN CARBIDE CUTTERS
Use for shaping, smoothing & material removal
Use on hardened steel & stainless steel
Also used on the following:
Cast iron, non-ferrous metals & plastics
Fired ceramics, hardwood & other hard materials
9903 TUNGSTEN CARBIDE CUTTER
SIZE:1/8"
POINT:Rounded
|
Online
$9.08 for 1 EA
Retail $12.99
Mfr PN: 9903
Stock: 6
5-4240 4 IN. METAL GRINDING WHEEL
5-4240 4 IN. METAL GRINDING WHEEL
Online
$1.95 for 1 EA
Retail $2.19
Mfr PN: 5-4240
Stock: 52
|
TYPE 27 METAL GRINDING WHEEL
Metal depressed center grinding wheel
Made with resin bond
Two-ply fiberglass reinforced wheel
Balanced design for long life & efficiency
5-4240 4 IN. METAL GRINDING WHEEL
SIZE:4 x 1/4"
ARBOR:5/8
|
Online
$1.95 for 1 EA
Retail $2.19
Mfr PN: 5-4240
Stock: 52
Forney Industries 71819 Type 27 Circular Shape Depressed Center Grinding Wheel, 4-1/2 in Dia x 1/4 in T, 24 Grit
Forney Industries 71819 Type 27 Circular Shape Depressed Center Grinding Wheel, 4-1/2 in Dia x 1/4 in T, 24 Grit
Online
$6.53 for Each
Retail $8.29
Mfr PN: 71819
Stock: 0
|
Aluminum oxide metal grinding wheel. Designed for metal grinding, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. For use on right angle grinders. Wheel size: 4-1/2"; Thickness: 1/4; Arbor: 5/8"-11; Maximum
rpm: 13,300. For use on right angle grinder.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Online
$6.53 for Each
Retail $8.29
Mfr PN: 71819
Stock: 0
Forney Industries 71993 Type 29 Circular Shape Depressed Center Flap Disc, 4 in Dia, 80 Grit, 5/8 in Shank
Forney Industries 71993 Type 29 Circular Shape Depressed Center Flap Disc, 4 in Dia, 80 Grit, 5/8 in Shank
Online
$6.90 for Each
Retail $8.75
Mfr PN: 71993
Stock: 0
|
4" with 5/8" arbor. For right angle grinders. Cuts fast and outlasts sanding discs. Great flexibility. Ideal for rough or fine finishing. Multiple layers of Zirconia cloth flaps constantly exposing new extra sharp grinding points. Laminated by state-of-th
e-art automated equipment. Reinforced fiberglass backing plate. Each disc balance tested for vibration free grinding/finishing. Wheel size: 4"; Arbor 5/8"; Maximum rpm: 13,300; Tool type: right angle grinder.
Grit=80
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Online
$6.90 for Each
Retail $8.75
Mfr PN: 71993
Stock: 0
5-4245 4.5 IN. METAL GRINDING WHEEL
5-4245 4.5 IN. METAL GRINDING WHEEL
Online
$3.18 for 1 EA
Retail $3.19
Mfr PN: 5-4245
Stock: 392
|
TYPE 27 METAL GRINDING WHEEL
Metal depressed center grinding wheel
Made with resin bond
Two-ply fiberglass reinforced wheel
Balanced design for long life & efficiency
5-4245 4.5 IN. METAL GRIND WHEEL
SIZE:4-1/2 x 1/4"
ARBOR:7/8
|
Online
$3.18 for 1 EA
Retail $3.19
Mfr PN: 5-4245
Stock: 392
5-4231 4.5 IN. MASON GRINDING WHEEL
5-4231 4.5 IN. MASON GRINDING WHEEL
Online
$3.48 for 1 EA
Retail $3.49
Mfr PN: 5-4231
Stock: 49
|
TYPE 27 MASONRY GRINDING WHEEL
Made with silicone carbide
Fiberglass reinforcements for maximum strength
Designed not to load up
5-4231 4.5 IN. MASON GRIND WHEEL
SIZE:4-1/2 x 1/4"
ARBOR:7/8
|
Online
$3.48 for 1 EA
Retail $3.49
Mfr PN: 5-4231
Stock: 49
6IN 150GRIT PSA DISC 3PK
6IN 150GRIT PSA DISC 3PK
Online
$3.13 for PK 3
Retail $4.49
Mfr PN: 3010
Stock: 0
|
Fits 6" back pads for electric drills and any sanding pad with the same diameter. For use on wood, metal, drywall, fiberglass and painted surfaces. The stick-on adhesive holds securely without slipping so you can smooth large surfaces. Fits any 6" backer
pad. Made from heavy-duty sandpaper. Designed for power tool sanding and to resist heat and humidity for longer life.
6" Diameter-Carded
Grit=150
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Online
$3.13 for PK 3
Retail $4.49
Mfr PN: 3010
Stock: 0
HEAVY DUTY CUP GRINDER 5/8X11
HEAVY DUTY CUP GRINDER 5/8X11
Online
$61.13 for CD
Retail $76.99
Mfr PN: DW4772
Stock: 0
|
Used for rough grinding, deburring and fast material removal of concrete, masonry and stone. Designed for heavy material removal.
5/8"-11 ROUND ARBOR
Dia In=4Max. RPM=15,000
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Online
$61.13 for CD
Retail $76.99
Mfr PN: DW4772
Stock: 0
88260-8 T66C 6X1X1 GRINDING WHEEL
88260-8 T66C 6X1X1 GRINDING WHEEL
Online
$13.92 for 1 EA
Retail $19.99
Mfr PN: 076607882608
Stock: 1
|
BENCH GRINDING WHEEL
Aluminum oxide material
For metal grinding applications
Center hole 1"
Bushings included to fit other arbor-
sizes: 1/2 5/8 3/4 & 7/8"
88260-8 T66C 6X1X1 GRIND WHEEL
SIZE:6 x 1 x 1"
GRIT:Coarse
|
Online
$13.92 for 1 EA
Retail $19.99
Mfr PN: 076607882608
Stock: 1
Gator 3873 Quick Change Premium Backing Pad, 4-1/2 in Dia, 13000 rpm
Gator 3873 Quick Change Premium Backing Pad, 4-1/2 in Dia, 13000 rpm
Online
$11.77 for Each
Retail $16.05
Mfr PN: 3873
Stock: 0
|
Flexible pad for flat or contoured surfaces. Fits angle grinders with 5/8" spindle. Gator 4-1/2" backer pads are designed to support 4-1/2" x 7/8" fiber discs.
Dia In=4-1/2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Online
$11.77 for Each
Retail $16.05
Mfr PN: 3873
Stock: 0
INCDEWALT_BM/prodimg/4211447.jpg)
DWA4511 4-1/2 GRINDING WHEEL
DWA4511 4-1/2 GRINDING WHEEL
Online
$2.38 for 1 EA
Retail $2.39
Mfr PN: DWA4511
Stock: 38
|
TYPE 27 CUTTING & GRINDING WHEELS
Depressed center wheel metal/stainless -
cutting and grinding wheel
A24N aluminum oxide grain - softer formulation
than A24R grit for fast cut or grind
Offers aggressive grinding & smoother operation
3 full sheets of fiberglass for durability -
and safety
7/8" arbor - maximum RPM 13,300
DWA4511 4-1/2 GRINDING WHEEL
SIZE:4-1/2"
THICKNESS:1/8"
|
Online
$2.38 for 1 EA
Retail $2.39
Mfr PN: DWA4511
Stock: 38
GRINDER ANGLE 4-1/2IN W/CASE
GRINDER ANGLE 4-1/2IN W/CASE
Online
$98.08 for Each
Mfr PN: 9557PBX1
Stock: 0
|
Powerful 7.5 amp motor delivers 11,000 rpm for high output power. Small diameter barrel grip (only 2-1/2") for added comfort. Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Extra large paddle sw
itch for comfortable operation. Thicker coil wires are wound more closely to reduce heat and energy loss. All-ball bearing design and metal gear housing for durability. Rotatable gear housing can be positioned every 90°. Includes: (1) 4-1/2" Diamond Blade
, Turbo, General Purpose (A-94552), (5) 4-1/2" Grinding Wheels (A-95956), (1) 4-1/2" Wheel Guard (125273-5), (1) 4-1/2" Cut-Off Wheel Guard (135103-2), (1) Lock Nut (193465-4), (1) Lock Nut (193465-4), (1) Lock Nut Wrench (782422-3), (1) Si
de Handle (153489-2), (1) Inner Flange (224399-1) and (1) Case.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Online
$98.08 for Each
Mfr PN: 9557PBX1
Stock: 0
150GRIT PSA 1/4 SHEET 5PK
150GRIT PSA 1/4 SHEET 5PK
Online
$2.35 for PK 5
Retail $2.79
Mfr PN: 4073
Stock: 0
|
For use on wood, metal, drywall, fiberglass and painted surfaces. Resin bonded to resist heat and humidity for longer life. These stick-on premium sheets are designed to fit any 1/4 sheet stick-on palm sander. The heavy duty resin sandpaper resists heat a
nd humidity for longer life. The pressure sensitive holding system holds securely without slipping, tearing or wrinkling, allowing 100 percent use of the sander's motion.
Grit=150Wdth In=4-1/2 x 4-1/2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Online
$2.35 for PK 5
Retail $2.79
Mfr PN: 4073
Stock: 0
Gator 3783 Sanding Disc, 5 in, 120 Grit
Gator 3783 Sanding Disc, 5 in, 120 Grit
Online
$2.78 for PK 5
Retail $4.25
Mfr PN: 3783
Stock: 0
|
For use on wood, metal, drywall, fiberglass and painted surfaces. The quick-change hook & loop holding system allows faster disc changes. Fits Porter Cable Random Orbit Sanders. This quality Red Resin sanding disc is designed specifically for power tools.
5" Diameter - Carded
/nGrit=120
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Online
$2.78 for PK 5
Retail $4.25
Mfr PN: 3783
Stock: 0
88255-4 6X1X1 T66M GRINDING WHEEL
88255-4 6X1X1 T66M GRINDING WHEEL
Online
$13.92 for 1 EA
Retail $19.99
Mfr PN: 076607882554
Stock: 2
|
BENCH GRINDING WHEEL
Aluminum oxide material
For metal grinding applications
Center hole 1"
Bushings included to fit other arbor-
sizes: 1/2 5/8 3/4 & 7/8"
88255-4 6X1X1 T66M GRIND WHEEL
SIZE:6 x 1 x 1"
GRIT:Medium
|
Online
$13.92 for 1 EA
Retail $19.99
Mfr PN: 076607882554
Stock: 2
TOOL RTRY KIT A/P ACCES 110PC
TOOL RTRY KIT A/P ACCES 110PC
Online
$27.66 for Each
Retail $31.25
Mfr PN: 709-02
Stock: 0
|
Versatile and reusable accessory kit includes everything you need to cut, grind, sand, polish, drill, sharpen and clean. Includes: 1-1/4" cut off wheel, 3/4" carbon steel brush, polishing compound, (4)-four-1" felt polishing wheel, silicon carbide grindi
ng stone, high speed cutter, 1/2"/60 grit sanding drum with mandrel, 1/4"/60 grit sanding band with mandrel, mandrel, wrench, aluminum oxide grinding stone, silicon carbide grinding stone, aluminum oxide grinding stone, (12)-twelve-15/16" emery cut off wh
eel, (12)-twelve-15/16" heavy duty emery .-cut off wheel, 1-1/4" fiberglass reinforced cut off wheel, (4)-four-small felt wheel, cone polishing tip, (6)-six-1/2"/60 grit sanding band, (12)-twelve- 3/4" 180 grit sanding disc, (12)-twelve- 3/
4"/220 grit sanding disc, (12)-twelve- 3/4"/.240 grit sanding disc, (6)-six-1/4"/60 grit sanding band, (6)-six-1/2"/120 grit sanding band, (6)-six- 1/4"/ 120 grit sanding band, mandrel, dressing stone, bristle brush and 180 grit abrasive buff.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Online
$27.66 for Each
Retail $31.25
Mfr PN: 709-02
Stock: 0
Freud DCX070040B01F Diablo Flap Disc, Grinding and Polishing, 40 Grit
Freud DCX070040B01F Diablo Flap Disc, Grinding and Polishing, 40 Grit
Online
$24.78 for 2 EA
Retail $24.78
Mfr PN: DCX070040B01F
Stock: 0
|
7" Diameter - 5/8" Arbor
Grit=40
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Online
$24.78 for 2 EA
Retail $24.78
Mfr PN: DCX070040B01F
Stock: 0
8X1X1 GRINDING WHEEL
8X1X1 GRINDING WHEEL
Online
$21.53 for Each
Retail $32.65
Mfr PN: 88280
Stock: 0
|
For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications.
1" ROUND ARBOR
Fine Grit
Dia In=8Max. RPM=3,600
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Online
$21.53 for Each
Retail $32.65
Mfr PN: 88280
Stock: 0
4 X 1/8 X 5/8 GRINDING WHEEL
4 X 1/8 X 5/8 GRINDING WHEEL
Online
$1.85 for Each
Retail $2.79
Mfr PN: DWA4510
Stock: 0
|
High grain concentration for aggressive grinding action and smoother running wheels. 1/8" blade thickness.
5/8" ARBOR
Dia In=4Max RPM=13,300
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Online
$1.85 for Each
Retail $2.79
Mfr PN: DWA4510
Stock: 0
220GRIT PSA 1/4 SHEET 5PK
220GRIT PSA 1/4 SHEET 5PK
Online
$2.35 for PK 5
Retail $2.79
Mfr PN: 4072
Stock: 0
|
For use on wood, metal, drywall, fiberglass and painted surfaces. Resin bonded to resist heat and humidity for longer life. These stick-on premium sheets are designed to fit any 1/4 sheet stick-on palm sander. The heavy duty resin sandpaper resists heat a
nd humidity for longer life. The pressure sensitive holding system holds securely without slipping, tearing or wrinkling, allowing 100 percent use of the sander's motion.
Grit=220Wdth In=4-1/2 x 4-1/2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Online
$2.35 for PK 5
Retail $2.79
Mfr PN: 4072
Stock: 0
8193 ALUMINUM OXIDE GRINDING STONE
8193 ALUMINUM OXIDE GRINDING STONE
Online
$3.08 for 1 EA
Retail $3.89
Mfr PN: 8193
Stock: 34
|
ROUND ALUMINUM OXIDE GRINDING STONE
Use on metals, castings, joints & rust
For general purpose grinding, -
sharpening & deburring
1/8" shank
8193 ALUM OXIDE GRINDING STONE
SIZE:5/8"
SHAPE:Round wheel
|
Online
$3.08 for 1 EA
Retail $3.89
Mfr PN: 8193
Stock: 34
76221 2-3/4 COARSE CUP BRUSH
76221 2-3/4 COARSE CUP BRUSH
Online
$4.38 for 1 EA
Retail $5.89
Mfr PN: 76221
Stock: 33
|
DRILL CUP WIRE BRUSH
Crimped wire cup brushes with 1/4" shank for -
use with electric / cordless drills
Maximum safe RPM speed: 4,500
Carded
76221 2-3/4 COARSE CUP BRUSH
SIZE:2-3/4"
DESC:Coarse
|
Online
$4.38 for 1 EA
Retail $5.89
Mfr PN: 76221
Stock: 33
Dremel 503 Flap Wheel, 3/8 in Dia, 120 Grit, 1/8 in Shank
Dremel 503 Flap Wheel, 3/8 in Dia, 120 Grit, 1/8 in Shank
Online
$6.13 for CD
Retail $7.19
Mfr PN: 503
Stock: 0
|
Size In=3/8Grit=120
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Online
$6.13 for CD
Retail $7.19
Mfr PN: 503
Stock: 0
75099 GRINDER FLANGE NUT KIT
75099 GRINDER FLANGE NUT KIT
Online
$10.20 for 1 KT
Retail $12.99
Mfr PN: 75099
Stock: 35
|
REPLACEMENT GRINDER FLANGE NUT SET
Fits most small angle grinders -
with 5/8" - 11 spindle
75099 GRINDER FLANGE NUT KIT
|
Online
$10.20 for 1 KT
Retail $12.99
Mfr PN: 75099
Stock: 35
DW4999 7X1/4X5/8 GRINDING WHEEL
DW4999 7X1/4X5/8 GRINDING WHEEL
Online
$6.98 for 1 EA
Retail $6.99
Mfr PN: DW4999
Stock: 62
|
TYPE 27 HI-PERFORMANCE GRINDING WHEEL
High performance aluminum oxide grain for -
long life and high material removal
Smoother running wheel has aggressive -
cutting action - A24R grit
Has 3 full sheets of fiberglass for -
durability and safety
For H-D cutting & grinding on ferrous metals
Weld blending, pipe beveling & edge cutting
DW4999 7X1/4X5/8 GRINDNG WHEEL
SIZE:7" x 1/4"
ARBOR:5/8"-11
|
Online
$6.98 for 1 EA
Retail $6.99
Mfr PN: DW4999
Stock: 62
5-8215 A-15 MOUNTED POINT
5-8215 A-15 MOUNTED POINT
Online
$2.93 for 1 CD
Retail $3.69
Mfr PN: 5-8215
Stock: 0
|
MOUNTED POINTS
Aluminum oxide grinding points
Perfect for grinding, polishing, deburring
1/4" shank and high speed rating
Excellent for die grinders
Carded for easy retail display
5-8215 A-15 MOUNTED POINT
TYPE:A-15
DESC:72,000 RPM
|
Online
$2.93 for 1 CD
Retail $3.69
Mfr PN: 5-8215
Stock: 0
75523 4-1/2X.045 METAL GRINDING WHEEL
75523 4-1/2X.045 METAL GRINDING WHEEL
Online
$2.00 for 1 EA
Retail $2.49
Mfr PN: 75523
Stock: 442
|
TYPE 1A ANGLE GRINDER METAL CUTTING WHEEL
Aluminum oxide grit & premium resin bond for -
professional cutting results using angle grinder
Extra thin thickness for fast clean cuts -
in all ferrous metals and stainless steel
Double fiberglass reinforced for safety -
and increased durability
5/8" arbor on 4" wheels - 7/8" on 4-1/2 & larger
SIZE= Diameter x Thickness - DESC= Pack & Grit
75523 4-1/2X.045 MTLGRND WHEEL
SIZE:4-1/2"x .045"
DESC:Bulk - A60T
|
Online
$2.00 for 1 EA
Retail $2.49
Mfr PN: 75523
Stock: 442
|
|
|
|
Copyright © 1999-2020 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |