This item can NOT be shipped to these states CA
JET & SUBMERSIBLE PUMP PRESSURE SWITCH 40/60 pressure settings On at 40 psi and off at 60 psi Quality construction Works on jet pumps or 4" submersibles TC2153P2 40/60 PRESSURE SWITCH |
10' power cord, flexible wire construction, pump bracket sold separately. Run current: 13 amps. Start current 90 amps. Liquid temperature 140 degrees F.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
This item can NOT be shipped to these states CA
FLOAT SWITCH Rated at up to 15 amps Piggy-back plug connection For 115-volt operation 8 ft. power cord Ideal for any sump pump Normally open - maintains vessels empty Mounting straps included FP1815BDP2 NON-MERCURY SWITCH |
AUTOMATIC LIVESTOCK WATERING KIT
Easy installation watering kit - great for use -
in Rubbermaid(R) brand tanks
Other brands require UA600 tank adaptor
Kit consists of nozzle & arm assembly, stem & -
chain assembly and float
Free flow fill rate 6.5 gpm @ 50 psi
Max inlet pressure 75 psi
Resists freezing and damage from livestock
RL600 AUTOMATIC WATERING KIT
|
WATER PUMP PRESSURE SWITCH
Controls electrically driven water pumps
For jets, submersible, reciprocating, etc.
NEMA Type 1 indoor enclosure
2 pole, rated 1-1/2HP @ 115 Vac, 2HP @ 230 Vac
Cut-in/cut-out pressure 40/60 PSI
Diaphragm actuated
Does not have shut-off/on arm
FSG2J24CP 40/60 PRESS SWITCH
|
PRESSURE SWITCH
Pressure switch pipe connection 1/4" NPT
Captive nut on cover
Adjustment instructions are inside top cover
Contact points open on cut-out pressure
Points close on cut-in pressure drop
Individually boxed
MPS4060 40/60 PRES SWITCH
DESC:40/60
|
WATER PUMPPRESSURE SWITCH Designed for the control of electrically driven water pumps. Suitable for all types of pumps;, jets, submersible, reciprocating, etc. 2 pole-30-50 PSI-1/4"-18NPT diaphragm actuated. Package Shipping Size 9.00 x 15.25 x 21.00 (not product dimensions)
|
This item can NOT be shipped to these states CA
REPLACEMENT 1/2 HP PUMP CONTROL BOX For use with 3-wire 1/2HP, 230V submersible pump Control pumps starting and running Use #FP417-1172 replacement capacitor UL Listed FP217810P2 1/2HP CONTROL BOX |
PUMPTROL WATER PUMP PRESSURE SWITCH
Controls electrically driven water pumps
Suitable for all types of pumps
For jets, submersible & reciprocating pumps
2 poles
Cut-in/cut-out pressure 30/50 PSI
1/4"-18NPT connection - Diaphragm actuated
Equipped with low pressure cut-off
FSG2J21M4CP 30/50 PRESS. SWTCH
|
WATER-PUMP PRESSURE SWITCH
Controls electrically driven water pumps
Suitable for all types of pumps
For jets, submersible & reciprocating pumps
2 poles
Cut-in/cut-out pressure 30/50 PSI
1/4"-18NPT connection - Diaphragm actuated
Does not have shut off/on arm
FSG2J21CP 30/50 PRESSURE SWTCH
|
For domestic water systems, air compressors (not requiring mechanical release valves and where pressure does not exceed 65 PSI) and miscellaneous applications for gases and liquids which are not harmful to the Buna-N-diaphragm or the plated steel diaphrag
m housing. 1/4" FNPTF. Connection 1 HP at 120/240 Volt AC; 1,2,3 phase. 1/4 HP at 32 volt DC. Carded.
PSI=30-50
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
PUMP PRESSURE SWITCH
For jets, submersible & reciprocating pumps
NEMA Type 1 indoor enclosures
2 pole, rated 1-1/2 HP @ 115 Vac, 2HP @ 230 Vac
Cut-in/cut-out pressure 20/40 PSIG
1/4"-18NPT connection - Diaphragm actuated
Does not have shut off/on arm
6312748 equipped with pulsation plug
5224985 equipped with low pressure cut off
FSG2J20CP 20/40 PRESSUR SWITCH
|
LOW WATER CUT-OFF PRESSURE SWITCH
Shuts off at approx. 10psi below cut-in pressure
Auto start, manual start or off lever
MPSM43050 30/50 PRES SWITCH
DESC:30/50
|
| Factory Pre-Set: 20-40PSI Or 30-50PSI | Designed For Control Of Electrically Driven Water Pumps | 1/4-18 Npsf (Female Thread) | 1/2" Nominal Knockout For Electrical Line
|
For Models: SSF33, SSF50, CDU790 and CDU800.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
This item can NOT be shipped to these states CA
WELL SYSTEMS PRESSURE GAUGE For use on all well systems 0-100 PSI TC2104P2 100PSI PRESSURE GAUGE |
|
|
|
|
PRESSURE SWITCH
Pressure switch pipe connection 1/4" NPT
Captive nut on cover
Adjustment instructions are inside top cover
Contact points open on cut-out pressure
Points close on cut-in pressure drop
Individually boxed
MPS3050 30/50 PRES SWITCH
DESC:30/50
|
PRESSURE SWITCH
Pressure switch pipe connection 1/4" NPT
Captive nut on cover
Adjustment instructions are inside top cover
Contact points open on cut-out pressure
Points close on cut-in pressure drop
Individually boxed
MPS2040 20/40 PRES SWITCH
DESC:20/40
|
SUMP OR OPEN TANK FLOAT SWITCH
Designed for automatic control of liquid level -
in open sumps or tanks handling small motor -
loads directly or through a starter
NEMA Type Indoor enclosure
2 HP @ 115Vac & 3 HP @ 230Vac
Contact configuration - 2 pole
Single arm lever operator
9036DG2R FLOAT SWITCH
COLOR:Gray
|
PUMP PRESSURE SWITCH
For jets, submersible & reciprocating pumps
NEMA Type 1 indoor enclosures
2 pole, rated 1-1/2 HP @ 115 Vac, 2HP @ 230 Vac
Cut-in/cut-out pressure 20/40 PSIG
1/4"-18NPT connection - Diaphragm actuated
Does not have shut off/on arm
6312748 equipped with pulsation plug
5224985 equipped with low pressure cut off
FSG2J20PCP 20/40 PRESS.SWITCH
size:
color:Pulsation Plug Equipped
|
|
The dual patented filter rings on the Dual Filtered Diaphragm prevent sediment from reaching the bypass. This results in clog-free operation, eases valve maintenance, and reduces water usage. The Dual Filtered Diaphragm is factory assembled
|
|
|
DELEX REPLACEMENT BUTTONS
Replacement hot and cold buttons
New style
Made of plastic
Carded
0-6051 DELEX N/S H&C BUTTON
|
|
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |