The Right Stuff® Gasket Maker - 5oz

Make leak-proof gaskets and return equipment to service immediately! Permatex premier instant gasket maker was designed as a replacement for conventional gaskets. This elastomeric “formed-in-place" material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. Formulated to meet or exceed performance standards for long-term salability, durability and handling, this material is used on OEM production lines and specified in their service parts programs. Temperature range -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent; resists ATF, coolant, oil and other shop fluids. Sensor-safe. Fleet-tested. 

Applications:

• Automobile - Suggested Applications: Automotive, heavy duty, and marine gaskets, valve covers, gearbox covers, pumps, oil pans, thermostat housings, water pumps.
• Motorcycle - Suggested Applications: Transmission housing cover, clutch release cover
• Heavy Duty - Suggested Applications: Case covers, power divider shaft housings, input/output power shafts, PTO covers to housing, cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges

Directions:

Clean and dry parts. Push nozzle to dispense the Right Stuff®. Apply a continuous 1/8″ to 1/4″ bead to one surface, surrounding all bolt holes. Assemble parts within five minutes, tightening bolts to recommended torque levels. Material will fill any surface imperfection. Equipment can be returned to service immediately. To reuse package, leave a 1/2″ length of material extending out of the nozzle. Cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before.

NOTE: Not for use as a head gasket or on parts in contact with gasoline.

The Right Stuff® Gasket Maker - Instant Rubber

Make leak-proof gaskets and return equipment to service immediately! Permatex premier instant gasket maker was designed as a replacement for conventional gaskets. This elastomeric “formed-in-place" material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. Formulated to meet or exceed performance standards for long-term salability, durability and handling, this material is used on OEM production lines and specified in their service parts programs. Temperature range -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent; resists ATF, coolant, oil and other shop fluids. Sensor-safe. Fleet-tested. 

Applications:

• Automobile - Suggested Applications: Automotive, heavy duty, and marine gaskets, valve covers, gearbox covers, pumps, oil pans, thermostat housings, water pumps.
• Motorcycle - Suggested Applications: Transmission housing cover, clutch release cover
• Heavy Duty - Suggested Applications: Case covers, power divider shaft housings, input/output power shafts, PTO covers to housing, cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges

Directions:

Clean and dry parts. Push nozzle to dispense the Right Stuff®. Apply a continuous 1/8″ to 1/4″ bead to one surface, surrounding all bolt holes. Assemble parts within five minutes, tightening bolts to recommended torque levels. Material will fill any surface imperfection. Equipment can be returned to service immediately. To reuse package, leave a 1/2″ length of material extending out of the nozzle. Cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before.

NOTE: Not for use as a head gasket or on parts in contact with gasoline.

High-Temp Red RTV Silicone Gasket - 7.25oz

OEM specified. Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.). Replaces almost any cut gasket by making reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. Temperature range -65ºF to 650ºF (-54°C to 343°C) intermittent; resists auto and shop fluids. 

Applications:

• Automobile - Suggested Applications: Valve covers, oil pans, timing covers, thermostat housings

Directions:

Surfaces should be clean & dry. Apply a continuous, uniform 1/16” to 1/4” bead of silicone, surrounding all bolt holes. 1/8” is suitable for most applications. Bead size may be varied by finger pressure, how quickly applicator is moved and angle. For heavier beads, nozzle may be cut to size. Activate PowerBead™ by twisting nozzle one full turn counterclockwise, raising trigger. Press trigger to dispense. Assemble parts immediately while silicone is still wet. Silicone will fully cure in 24 hours. After use, store applicator by twisting nozzle clockwise, wiping away excess silicone & replacing plastic cap with a “click”.

NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.

Pneumatic/Hydraulic Sealant Bottle - 36ml

OEM specified. Designed for locking and sealing high pressure hydraulic and pneumatic systems. Contains no fillers or particles which could contaminate system fluids, foul valves, or clog fine filters and screens. Reliably cures on “as received” fasteners and controlled locking strength affords easy disassembly. 

Applications:

Automobile - Suggested Applications: Hydraulic line fittings, brake fittings, transmission fluid fittings, and PTO fittings.

Directions:

1. Clean and dry parts using Permatex® Surface Prep™ activator.
2. Shake bottle well before use.
3. Apply sealant to leading threads of the male fitting, leaving the first thread free of sealant. Apply to only _?_ of a thread turn. It is not necessary to apply to all threads.
4. Assemble parts and tighten to recommended torque. Refer to Technical Data Sheet for complete information.

NOTE: Permatex® Thread Sealant seals threaded metal fittings on hydraulic, pneumatic, fuel, and cooling systems. It is not recommended for use on plastic pipes.

The Right Stuff® 1 Minute Gasket™ Grey Instant Rubber Gasket Maker - 10oz

Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, the Right Stuff® GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms precut gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant, and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent. 

Applications:

Automobile - Suggested Applications: Automotive gaskets, valve covers, oil pans, transmission pans, thermostat housings, water pumps.

Directions:

Clean and dry parts. Slice tip off cartridge. Attach and cut nozzle at desired opening at a 45° angle, and insert into a standard cauking gun. Apply a continuous 1/8" to 1/4" bead to one surface, surrounding all bolt holes. Assemble parts within five minutes, tightening bolts to recommended torque levels. Material will fill any surface imperfection. To reuse package, leave a 1/2" length of material extending out of the nozzle. Cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before.

NOTE: Not for use as a head gasket or on parts in contact with fuels.