This item can NOT be shipped to these states CA
3/4HP SHALLOW WELL JET PUMP Superior performance at 25 ft. to water or less Capacities to 10 GPM @ 40 PSI Reinforced thermoplastic fiberglass pump housing Self-priming after pump housing initially filled Pre-set pressure switch to 30-50 psi setting Pressure shut-off at 78 psi 115/230 volts TC2104 pressure gauge recommended FP4022 3/4HP SHALWELL JET PUMP SIZE:3/4 HP |
This item can NOT be shipped to these states CA
4" 230V 3-WIRE 1 HP SUBMERSIBLE WELL PUMP For 4" inside diameter or larger wells Stainless steel pump and motor housing For high yield wells - 20 GPM series For farm, ranch and light irrigation Control box included for easy service Includes built-in check valve Precision-molded impellers & diffusers Motor designed for 20 starts per hour FP3332 1HP3W DPWEL 20GPM PUMP SIZE:1 HP GPM RATING:13.5 @ 100 Ft.Pumps to depth of 150 Ft. - 5.9 GPMFlotec brand |
RED LION SHALLOW WELL JET PUMP
Ideal for fresh water supply to home, farm,-
& cabins that have suction lifts down to 25 ft.
Pump features: self priming, rugged cast iron -
casing, 1-1/4" NPT suction, 1" NPT discharge
30/50 PSI pressure switch w/pressures to 66 psi
Glass filled thermoplastic impeller & diffuser
Can be set for use with 115V or 230V
2 year over-the-counter warranty
RJS75 3/4HP SHALOWELL JET PUMP
SIZE:3/4 HP
COLOR:Red
|
This item can NOT be shipped to these states CA
115V 1/2 HP SUBMERSIBLE WELL PUMP Stainless steel pump and motor housing For 4" inside diameter or large wells Pump wires direct to pressure switch Requires no control box - 2 wire 115 volt Includes built-in check valve Pumps 8.6 GPM at 100 ft. Pumps up to 150 ft. Flotec brand FP2211 1/2HP 2W DEEPWELL PUMP SIZE:1/2 HP |
| Rugged Cast Iron Housing Construction | Provides Excellent Performance with Good Pressure For Well To 25 Ft. Deep | 30/50PSI Pressure Switch | Flow Rates To 15 GPM , Pressures To 70PSI | A.O. Smith 115/230 Dual Voltage Motor
|
This item can NOT be shipped to these states CA
230V 3-WIRE 3/4 HP SUBMERSIBLE WELL PUMP For 4" inside diameter or larger wells Stainless steel pump and motor housing For average yield wells -10 GPM series For general home and farm use Control box included for easy service Includes built-in check valve Precision-molded impellers & diffusers Motor designed for 20 starts per hour FP3222 3/4HP 3W DEEPWELL PUMP SIZE:3/4 HP GPM RATING:11.9 @ 100 Ft.Pumps to depth of 200 Ft. - 6.0 GPMFlotec brand |
This item can NOT be shipped to these states CA
1/2HP SHALLOW WELL JET PUMP Cast iron shallow well pump for wells to 25 ft. Capacity up to 8.5 GPM @40 PSI w/ 5 ft. depth Will pump 4.6 GPM @ 25 ft. depth Ready to install 115 volt - 9.4 amp motor 1-1/4" NPT suction & 1" NPT discharge Preset pressure switch w/30-50 psi setting 1 year warranty - UL Listed FP4112 1/2HP SHALWELL JET PUMP DESC:1/2 HP |
4" 3 WIRE SUBMERSIBLE WELL PUMP
3-wire pumps supplied with Franklin Electric -
motor and includes control box
3-wire / 230 volt operation
Thermoplastic discharge and motor bracket
Stainless steel pump shell
Built-in suction screen and check valve
3 year warranty
RL12G103W2V 1 HP SUB WELL PUMP
SIZE:1 HP
DESC:12 GPM Capacity
|
This item can NOT be shipped to these states CA
3/4 HP SHALLOW WELL JET PUMP Cast iron jet pump has superior performance - at depths to water of 25 feet or less Rugged, heavy-duty cast iron housing Ready-to-install 230 volt motor can be - converted to 115 volt 1-1/4" NPT suction & 1" NPT discharge pipe sizes Capacities" 25 ft. lift, 70 PSI & 8.5 GPM Jet kit included FP4122 3/4 HP CISW JET PUMP SIZE:3/4 HP |
| Rugged Cast Iron Housing Construction | Provides Excellent Performance with Good Pressure For Well To 25 Ft. Deep | 30/50PSI Pressure Switch | Flow Rates To 15 GPM , Pressures To 70PSI | A.O. Smith 115/230 Dual Voltage Motor
|
| Shallow and deep well uses | One piece stainless steel shaft | Cast iron casing | Lexan impeller | Pressures to 96 psi | Lifts to 90 feet | Flow rates to 20.6 GPM | 1-1/4" suction, 1" discharge, 1" drive | 30/50 psi Square D pressure switch | A.O. Smith motor, 115/230 dual voltage
|
This item can NOT be shipped to these states CA
SHALLOW WELL JET PUMP Superior performance at 25 ft. to water or less Capacities from 4.0 at 25 ft. to 7.4 gpm at 5 ft. Reinforced thermoplastic fiberglass pump housing Self-priming after pump housing initially filled Pre-set pressure switch to 30-50 psi setting Pressure shut-off at 77 psi 115 volts TC2104 pressure gauge recommended FP4012 1/2HP SHALWELL JET PUMP SIZE:1/2 HP |
1/2 HP and 3/4 HP cast iron convertible jet well pump. Assembled in the US with foreign and domestic parts. 3/4 in. NPT discharge with 1 1/4 in. NPT suction and 1 in. drive. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240
V). Pressure switch is pre-set at 30-50 PSI for automatic operation. Max flow rate of 408 GPH at 0 ft. (50 PSI/CWS50) and 462 GPH at 0 ft. (50 PSI/CWS75). Durable cast iron volute with dedicated priming port for volute filling. For wells 0 ft. - 90 ft. in
depth. Jet assembly required (sold separately).
CAPACITOR START - OVERLOAD PROTECTED
Factory Wired For 240 V, 3450 RPM - 408 gph at5'
HP=3/4Voltage=120/240
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
This item can NOT be shipped to these states CA
CONVERTIBLE JET PUMP W/INJECTOR KIT Red Lion Brand 16.2 GPM 3/4 HP Premium cast iron convertible jet pump - with injector kit RJ-75-PREM 3/4HP CON JET PUMP |
4" 3 WIRE SUBMERSIBLE WELL PUMP
3-wire pumps supplied with Franklin Electric -
motor and includes control box
3-wire / 230 volt operation
Thermoplastic discharge and motor bracket
Stainless steel pump shell
Built-in suction screen and check valve
3 year warranty
RL12G073W2V 3/4HP SUBWELL PUMP
SIZE:3/4 HP
DESC:12 GPM Capacity
|
This item can NOT be shipped to these states CA
230V 1/2 HP 3-WIRE SUBMERSIBLE WELL PUMP For 4" inside diameter or larger wells Stainless steel pump and motor housing For average yield wells -10 GPM series For general home and farm use Control box included for easy service Includes built-in check valve Precision-molded impellers & diffusers Motor designed for 20 starts per hour FP3212 1/2HP 3W DEEPWELL PUMP SIZE:1/2 HP GPM RATING:8.6 @ 100 Ft.Pumps to depth of 150 Ft. - 2.8 GPMFlotec brand |
Designed for rugged, long life service, all parts are made from close grain cast iron for optimum strength. All bolt lugs are reinforced for maximum strength. Cap can be adjusted for a wide range of handle positions. Base tapped for 1-1/4" pipe connection
. If handle is left in up position and no foot valve is listed, entire pump will drain-prevents freezing.
Ht. Ins.=15
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
| Shallow and deep well uses | One piece stainless steel shaft | Cast iron casing | Lexan impeller | Pressures to 96 psi | Lifts to 90 feet | Flow rates to 20.6 GPM | 1-1/4" suction, 1" discharge, 1" drive | 30/50 psi Square D pressure switch | A.O. Smith motor, 115/230 dual voltage
|
4" - 3/4 HP 2 WIRE SUBMERSIBLE WELL PUMP
Powered by Franklin Electric industry standard -
motors for reliability
3/4 hp 2 - Wire model
Thermoplastic discharge and motor bracket
Stainless steel pump shell
Built-in suction screen and check valve
12 GPM pumping capacity
3 year warranty
RL12G072W2V 3/4HP SUBWELL PUMP
SIZE:3/4 HP
DESC:230 Volt
|
| Cast-Iron Construction | Provides Reliable Performance To 25 Ft. Deep | 115 Volt Motor | 30/50PSI Pressure Switch | Provides Up To 5.1 GPM | 1/2 Hp
|
Close-grained cast iron body and base, specially treated for corrosion resistance. Provides strong performance with good pressure for wells to 25' deep. Self-priming after the priming chamber has been filled with water. Drain port provided for easy winter
izing. Pump primes faster and handles more air with a multi-port, precision-molded, reinforced polypropylene diffuser. Motor windings feature insulation materials that protect against excessive moisture and contaminants. Heavy-duty ball bearings are seale
d, permanently lubricated, and tested to ensure extended life and smooth quiet operation. Built-in jet features a high strength poly-carbonate nozzle and venturi for maximum resistance to corrosion and abrasion. Clean out plug provided for
ease of service. Noryl impeller is precision molded for perfect balance, and is ultra smooth for highest performance and efficiency. Mechanical shaft seal is precision lapped and made of highly polished carbon-ceramic, stainless steel construction, with a
n internal design for continuous water lubrication. Balanced rotor is die cast under high pressures for uniform performance and greater efficiency. Pump and motor shaft are stainless steel for maximum corrosion resistance, with a one-piece threaded shaft
for positive drive and alignment. Includes a dustproof cover to protect all electrical components from dirt, dusts, and insects. Pressure switch with adjustable cut-in and fixed differential (20 PSI). 115/230V
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
This item can NOT be shipped to these states CA
230V 1/2 HP SUBMERSIBLE WELL PUMP Pump wires direct to pressure switch 2-wire model requires no control box Includes built-in check valve Pumps 8.6 GPM @ 100 ft. Pumps up to 150 ft. 230 volts Flotec brand FP2212 1/2HP 2W DEEPWELL PUMP SIZE:1/2 HP |
| For 4" inside diameter or larger will casings | Pumps up to 200' | Patented floating stack design for sand resistance and reduced sand locking | Corrosion-resistant stainless steel pump and motor housing | Heavy duty discharge connection | Precision-molded impellers and diffusers | Includes built-in check valve | Water filled submersible motor | 230V, 3/4 HP, 2-wire motor
|
| For 4" inside diameter or larger will casings | Pumps up to 300' | Patented floating stack design for sand resistance and reduced sand locking | Corrosion-resistant stainless steel pump and motor housing | Heavy duty discharge connection | Precision-molded impellers and diffusers | Includes built-in check valve | Water filled submersible motor | 230V, 1 HP | 2-wire motors do not use a control box
|
| For 4" inside diameter or larger will casings | Pumps up to 150' | Patented floating stack design for sand resistance and reduced sand locking | Corrosion-resistant stainless steel pump and motor housing | Heavy duty discharge connection | Precision-molded impellers and diffusers | Includes built-in check valve | Water filled submersible motor | 230V, 1/2 HP, 2-wire motor
|
Built-in shallow well jet has corrosion-resistant nozzle, venturi and check valve. Close-grained cast iron pump body and base. Built-in check valve to prevent accidental loss of prime. Dust-proof cover to protect all electrical components from dust and in
sects. Motor features stainless steel shaft, heavy-duty ball bearings, balanced rotor and insulated motor windings. Pre-set, pre-wired pressure switch for automatic operation when used with water system tank. Top or side discharge-simplifies installation.
1-1/4" NPT suction and 3/4" NPT discharge. Dual voltage 115/230V; factory set at 230V. Wiring diagrams are permanently affixed on each motor for easy field change to 115 volt. Pressure switch setting 30-50. CSA certified.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
3/4 HP dual voltage motor (115/230v). Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch.For shallow well applications up to 25' depth. 7.8/3.9 amps, 1-1/4 NPT suction,
1" discharge/dirive port, 20/40 pressure switch, 74 psi max pressure, 13.75 gpm max flow rate. 1 year warranty from superior Pump.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
RED LION HIGH PERFORMACE WELL JET PUMP
Ideal for supply of water for homes, farms -
& cabins that have suction lifts down to 25 ft.
High performance with rugged cast iron casing
Heavy-duty dual voltage (115/230 Volt) motor -
with capacitor for increased starting power
Pressure switch pre-set at 30/50 PSI
Produces up to 50 psi with automatic shut-off
1-1/4" FNPT intake - 1" FNPT discharge
602206 1/2HP SHALOWEL JET PUMP
SIZE:1/2 HP.
COLOR:Red
|
1/2 HP CAST IRON CONVERTIBLE JET PUMP
1/2 HP jet pump for suction lifts down to 90 ft.
Ideal for shallow well (less than 25 ft.) or -
deep well use (25 to 90 ft.)
Use for rural home, farm or cabin
H-D dual voltage (115/230 Volt) motor
Pre-set 30/50 pressure switch, thermoplastic -
impellor & diffuser for high performance
Pressure gauge included
602136 1/2HP CONV JET PUMP
SIZE:1/2 HP
COLOR:Red
|
This item can NOT be shipped to these states CA
RED LION 1/2 HP SUBMERSIBLE WELL PUMP For fresh water supply in 4" or greater - diameter drilled wells to depths of 200 ft. Stainless steel pump shell with built-in - screen and check valve Maximum flow 12 GPM depending on well depth 1/2 HP - 2-wire, 115 volt, 12 amp motor Thermoplastic discharge & motor bracket Does not include control box 14942401 1/2HP 4 IN. WELL PUMP SIZE:1/2 HP. DESC:1-1/4" Discharge |
This item can NOT be shipped to these states CA
230V 3-WIRE 1 HP SUBMERSIBLE WELL PUMP Economical & energy efficient pump for 4"wells Provides optimum amount of water & pressure - for general home & farm use: 10 GPM capacity Operating range: 10 to 300 ft. Floating stack design for sand resistance Corrosion-resistant stainless steel pump- and motor housing / 230 Volt - 3 wire + ground Maximum PSI: 170 - Discharge size: 1-1/4" NPT FP3232 1HP 3WIRE SUB WELL PUMP SIZE:3-7/8" Diameter FINISH:Stainless SteelFlotec brand |
This item can NOT be shipped to these states CA
1/2 HP CONVERTIBLE DEEP WELL JET PUMP Simer(R) cast iron construction jet pump Superior performance at depths to water - of 70 ft. or less - 9GPM at 10 ft. lift Ready-to-install, heavy-duty, 1/2 hp motor 115/230V AC - preset at factory for 115 Volt Self-priming after pump housing is filled Check valve or foot valve is required Pre-wired 30/50 switch - ejector kit included 3205C 1/2 HP CI CONVT JET PUMP SIZE:1/2 HP COLOR:Black |
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |