The all new line of Smittybilt XRC bumpers for the 84-01 Jeep Cherokee was engineered to provide maximum ground clearance. Manufactured out of 3/16" cold rolled steel that is robotically welded to exact specifications.

BILLET HANDLE COLLAR

A must-have item for Hi-Lift Jack owners! The rugged polyurethane Hi-Lift Handle Keeper firmly holds the Hi-Lift Jack handle to the upright steel I-beam of the jack, keeping the handle in place when not in use and eliminating rattling during transportation and storage. Hi-Lift's unique design allows the Handle Keeper to be slipped on or off the jack without having to remove the Top Clamp/Clevis! Available in Black and Red. Black Rugged polyurethane Hi-Lift handle keeper firmly holds the Hi-Lift Jack handle

• Fits all doors including tailgate • Installs easily without drilling • Replaces factory door handles • Heavy duty durable stainless steel Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Black powder coat over stainless steel Smooth design Sold individually

HANDLE

SINGLE DOOR LOCK ACTUATOR

Daystar's hood pin kits utilize polyurethane grommets that help keep the hood isolated from its attachment points. Without these grommets, fiberglass hoods tend to crack around their mounting points. The grommet allows a certain amount of give that enables the fiberglass to flex as needed, yet still maintain a positive attachment. The kit includes a 5/8" diameter steel pin along with stainless steel fasteners to attach the grommet to the hood. A spring retaining clip rounds out the kit. Sold individually since not everyone uses and even number of hood pins.

Locking gas cap helps guard against theft or contamination of fuel. Kit includes a Black quick on/off, quarter–turn, locking gas cap and two stainless steel keys and lock.

Smittybilt front stingers are developed and throughly tested in the most extreme conditions. They are hand crafted to exacting specifications using DOM 1020 2" tubing which is one of the strongest materials available.Each stinger base is manufactured out of 3/16" cold rolled steel with reinforced gussets and solid D-Ring mounts that are welded on the inside and outside for a maximum strength. All of the Stinger products come in the signature series Textured matte bkack finish and come with a 5-year limited warranty. When you're looking for the most grouind clearance and want a stinger that can withstand the most hostile environments look to Smittybilt to provide you the very best in stinger technology. Fits 1987 to 2006 Wrangler, Rubicon and Unlimited Textured black Manufactured from 2" DOM 120 steel tubing and 3/16" cold rolled steel D-ring mounts welded inside and out Can be used with various winch plates Maximum clearance for approach and departure angles

In case of accidents or misfortune, these end caps are available for many of Smittybilt's tubular products. They come in black or chrome to match your bumper's finish. Chrome Sold as a pair Works with Smittybilt's 3 inch tube bumpers Direct fit replacement

No mounting bolts are included. Fits front bumper driver side only. Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited Black Driver side Factory style replacement

Due to popular demand, Poison Spyder Brawler Rockers for JK are now available in light-weight aluminum. Features and construction are exactly identical to our Heavy Duty STEEL Brawler Rockers, the only exception being that these are fabricated from 3/16" thick aluminum plate rather than 3/16" steel. Aluminum would be preferred by those who want the bad-ass looks, entry step functionality, and an admittedly reduced measure of rocker armor protection, but with a very significant weight savings compared to the steel versions. For those who will be testing their Jeeps on tougher trails where frequent contact with the rocks is to be expected, we highly recommend opting for the steel versions. While the aluminum is a respectable 3/16" thick, it should not be expected to withstand the same amount of punishment that our steel Brawler Rockers can handle. Brawler Rockers are two-piece "mini-boatside" style rocker armor. Each component is fabricated entirely of CNC-laser cut, precision brake-formed 3/16" plate. The upper piece fits the lower section of your Jeep's exterior sheet metal like a glove, conforming to the subtle curvature of the JK and providing protection similar to Poison Spyder's JK Body Armor. The lower piece incorporates a rub rail/step that protrudes about 3¼" outboard of the Jeep's body tub. The top surface of the rub rail may also serve as an entry step. Below, the brake-formed 3/16" plate material angles down and inward to form a high clearance boatside. Inside, an array of beefy 3/16" thick internal gussets provide extra strength to the Brawler Rocker. Oval lightning holes along the length of the boatside section provide great Poison Spyder looks while allowing access to hose out mud and debris after a day on the trail. The ends of the Brawler Rockers are capped in the same 3/16" plate material, in angled facets that allow up to a 40" tire and visually integrate with the lines of Poison Spyder front and rear JK Crusher Flares. The upper piece attaches to the body tube using supplied stainless steel flat-head cap screws and nut-serts. The lower piece attaches to the upper piece also with stainless steel flat-head cap screws and easy-to-install clip-nuts. All fastener holes are countersunk for a flat surface using the flat-head hardware. Underneath, the lower piece attaches at the Jeep's body mounts. Attaching the Brawler Rockers in this way, along several different planes, provides triangulated strength to the entire assembly. The body-mount tie-ins ensure that they are securely integrated to the strongest structural component of the Jeep—the frame—while also allowing the Brawler Rocker to hug the body tub as closely as possible. Please note that Brawler Rockers are NOT compatible with body lifts. Brawler Rockers ship bare, allowing you to paint or powdercoat in the color of your choice. Note that if you have previously installed Poison Spyder's JK Body Armor, you will be able to re-use the existing nut-serts, saving a significant amount of installation time (Body Armor will have to be removed).

Vehicle specific fitting kit required to mount ARB Bull Bar to the vehicle chassis. This fitting kit has been specially designed to work with this vehicle's air bag deployment and other safety systems. Fits 2010 to 2012 Toyota FJ Cruiser Includes all hardware to mount ARB Delux Bar (ARB3420210)

The all new line of Smittybilt XRC bumpers for the 84-01 Jeep Cherokee was engineered to provide maximum ground clearance. Manufactured out of 3/16" cold rolled steel that is robotically welded to exact specifications. The front bull bar is manufactured from 1.75" tubing and has two light tabs that can accommodate up to a 9" light. Its unique design is capable of mounting up to a 15,000 lb. winch. Fits 1984 to 2001 XJ Cherokee Textured black 3/16 cold rolled steel One-piece welded design Raised corners for better entry and exit Built-in winch plate to accommodate up to a 12k winch Optional Bull Bar sold separately as part number 76811 5-year limited warranty

The new line of XRC JK front fenders was specifically engineered to provide the protection and clearance needed when you're pushing your rig through the toughest conditions. Each piece of armor is manufactured out of 3/16" cold rolled steel and then powder coated in Smittybilt's signature series two stage matte black powder coat finish. Each fender is designed to be a complete bolt- on with stainless steel fasteners and requires no modification to the vehicle. All of the XRC Fenders come with an inner fender liner to keep mud, snow or any other debris out of the engine compartment and replaceable slide plates. Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Two stage matte black powder coat finish 3/16" cold rolled steel Includes inner fender Stainless steel hardware No modification to vehicle required Pair

Locking Billet aluminum fuel doors are stylish and secure for today's Jeeps. Manufactured of quality aluminum with highly polished finish and seals your gas tank to OE specifications. Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Black powder coat Seals gas tank to OE Specifications Locking fuel door

Unlike most brush guards and bumpers, ARB Bull Bars incorporate a fully engineered mounting system which completely replaces the factory bumper. ARB's Deluxe Bull Bar selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality. Fits 2006 to 2011 Toyota FJ Cruiser Winch mount Air bag approved Recessed indicators Optional recessed fog lamps Retains factory tow points Black powder coat Antenna mounts Light mounts 2006-09 Models require additional fit kit ARB3520010 2010-12 Models require additional fit kit ARB3520020

In case of accidents or misfortune, these end caps are available for many of Smittybilt's tubular products. They come in black or chrome to match your bumper's finish. Black Sold as a pair Works with Smittybilt's 3 inch tube bumpers Direct fit replacement

Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. Fits 1976 to 2006 Wrangler and CJ Front Bumper With Hoop Black No Drill Installation 5-year limited warranty

These Hatch Covers fit directly over the existing gas cap opening. They attach directly to the original equipment plastic insert using self tapping screws. Some drilling required. Come in Locking and Non-locking.

M1 GRILL EMBLEM

HARDWARE PACK (5 CLIPS)

The AVS 88407 Stepshield Universal Doorsill Protector is designed to prevent scratches and scuffs on the doorsill by letting you step on the protector and not the finish. Made from strong, highly durable materials, the Stepshield is weather resistant and comes in a 2-pack set. The universal protectors can be easily installed by simply trimming the protectors to the size of the doorsill. Fits almost any model of door. The Stephshield measures 30.5-inches (L) by 4-inches (W). The AVS 88407 Universal Stepshield Doorsill Protector comes with a limited lifetime warranty that protects against defects in materials and workmanship. With roots dating back to 1935, AVS is the innovator of the vent shade product. Today, AVS manufactures high-quality automotive accessories with ventvisors/side window deflectors and hood protections as primary product lines.

• Prevent scratches and scuffs to the doorsill
• Universal doorsill protector fits all makes and models
• Made from strong, highly durable weather resistant material
• Measures 30.5-inches by 4-inches for trim-to-fit installation
• Comes with a limited lifetime warranty

This item usually ships within 1-2 weeks.

Add style to your Jeep® without breaking the bank! Stainless Steel & Black Powder Coat accessories are high-quality products that are reasonably priced. And easy to care for too! The Stainless Steel requires only an occasional waxing to keep their mirror-like shine. Accessories include all mounting hardware.

HANDS-FREE CHGR CRDL W/MIC-NXTEL I50/I85