D-SS Series Lens Cover - Smoke

RIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. 

These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights.

Features:

• Easy to Snap On & Off, Polycarbonate Plastic
• Extra Layer of Protection

∗ Sold as an Individual

Light Bar Security Kit for Flush Mount Lights

Stainless steel security hardware kit for any of the RIGID Flush-mount LED Lights. Includes security nuts/bolts and necessary security keys for installation. Must be used along with standard hardware supplied with your light.

Features: 

• Stainless Steel Construction Hardware
• Includes: Security Bolts and Security Keys

One (1) kit required for a pair of lights.

Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.

H11 LED Headlight Kit - Single Beam - Pair

• New design for clean and easy installations.
• 6000 Lumens.
• 25 Watts per bulb.
• 6500K color temperature.
• Compact radial heatsink for better heat dissipation, less depth of space and easy installs.
• Voltage and current monitoring circuits are inside the compact radial heatsink housing and protected from the elements.
• 6500K color spectrum with 3000K (golden yellow) and 8000K (light blue tint) films.
• Rotatable bulb can adjust the beam pattern for the vehicle.
• IP67 rated.
• Sold as a pair.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

D-SS Series Lens Cover - Clear

RIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. 

These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights.

Features:

• Easy to Snap On & Off, Polycarbonate Plastic
• Extra Layer of Protection

∗ Sold as an Individual

Light Bar Security Kit for D-Series Lights, D-SS & Radiance POD

Stainless steel security hardware kit for the RIGID Dually and D2 LED light families. Includes security nuts/bolts and necessary security keys for installation. Must be used along with standard hardware supplied with your light.

Features: 

• Stainless Steel Hardware
• Includes: Security Nuts/Bolts & Key

One (1) kit required per Light

Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.

D-SS Series Lens Cover - Black

RIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. 

These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights.

Features:

• Easy to Snap On & Off, Polycarbonate Plastic
• Extra Layer of Protection

∗ Sold as an Individual

Light Bar Security Kit for E-Series, SR-Series, Radiance & Radiance+ Lights

Stainless steel security hardware kit for the RIGID E-Series, E2-Series, SR-Series & SR2-Series LED light families. Includes security nuts/bolts and necessary security keys for installation. Must be used along with standard hardware supplied with your light.

Features: 

• Stainless Steel Hardware
• Includes: Security Nuts/Bolts & Key

One (1) kit required per each Light 

Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.

Replacement Lightbar Mounting Brackets & Hardware

Replacement mounting brackets and hardware for DR – DRC – BDR – BDRC – SR – and SRC Series HEISE light bars.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SR-Series 10" Cradle Mount - Black

This cradle mount is specifically designed to be used with our SR-Series LED light bars. It is made right here in the USA out of high quality stainless steel and powder-coated satin black to match RIGID Industries lighting components. 

Features:

• Stainless Steel Construction
• Black Powder Coat Finish
• Includes All Necessary Hardware
• Made in the USA!

Radiance™ Pod Amber Backlight Black Housing - Pair

Rigid Industries’ Radiance Pod is the perfect solution for those who want Rigid's legendary quality at a level everyone can attain. The Radiance Pod is built with the same high-grade aluminum alloy housing as our legendary D-Series, but that’s where the visual similarities end. Inside, the Rigid Industries’ Radiance Pod is feature-packed, with a black exposed printed circuit board, forward projecting optics that optimize the light output. 

The Rigid Industries’ Radiance Pod is for the customer who wants a truly custom look that only Rigid can provide. 

Features:

• 9-15 VDC
• High-Grade Aluminum
• Alloy Housing and Heatsink
• Mounting Brackets Included
• Dedicated Wire to run Back-Lighting without Primary LEDs
• IP68 Compliant – Dust / Water Ingress
• High Impact Polycarbonate Lens
• Complete Multi-Switch Wiring Harness Available #40300 (sold separately)
• GORE® Pressure Equalizing Vent
• Black Exposed Printed Circuit Board
• Back-Lighting Independently Controlled
• D-Series® Construction And Durability Broad Optic

In the Box:

• Mounting Hardware
• Stainless Steel, U-Shape Brackets
• Open Leads, No Connector

∗HARNESS SOLD SEPARATELY (PN 40300)

Accent Light Cover

This Accent Lighting Cover fits over accent lights (HE-ML1 and assorted colors – HE-4MLRGBK/ HE-8MLRGBK ) and can be positioned to divert light down for accent lighting or can be used to diffuse the strength of the lights when direct lighting is not needed.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Accent Lighting Cover

This Accent Lighting Cover fits over our accent lights (HE-TL1 and assorted colors – HE-4TLRGBK/ HE-8TLRGBK ) and can be positioned to divert light down for accent lighting or can be used to diffuse the strength of the lights when direct lighting is not needed.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Pigtail Adapter f/RGB Accent Lighting Pods

This Pigtail Adapter is designed to wire Heise RGB accent light pods (HE-TL1RGB/HE-ML1RGB) into any four wire positive anode RGB controller (HE-RGBSAC-1) without cutting the waterproof connection.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Dual Row Marine LED Light Light Bar - 14"

SPECS

• Input Voltage: 10-30V DC
• Wattage: 72W (24-3W CREE LEDs)
• Raw Lumens: 5400
• Color Temperature: 6000K
• Beam Pattern: Combo/Flood(90deg)/Spot(8deg)

CONSTRUCTION

• Housing Material: Die-cast Aluminum Housing
• Housing Color: White Coating with UV Inhibitors
• Membrane: Gore™
• Lens Material: PC
• Mounting Bracket: Die-cast Aluminum
• Hole Dimensions: Brackets turned inward – 13.50in
• Brackets turned outward – 14.75in
• Mounting Bolt Drill – .25in
• Electronics: Integrated-Epoxy Encapsulated
• Hardware: Stainless 316

OPERATION

• Operating Temperature: -40degC to +60degC
• Current Consumption: 3.7amps at 13.8 volts
• IP Rating: IP68
• Protections: Reverse Polarity

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

E-Series, RDS-Series & Radiance+ Lens Cover 10" - Black

RIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. 

Features:

• Easy to Snap On & Off
• Polycarbonate Plastic
• Extra Layer of Protection

Light Bar Security Kit for E-Series, SR-Series, Radiance & Radiance+

This Security Nut Kit from RIGID Industries makes a potential thief's job much more difficult. It includes two (2) 2.25 x 20 spanner nuts, four (4) spacer washers, and one (1) 1/4" hex nut bit. This kit is designed to work with cradle and weld-on mounts.

Security Kit Fits: E-Series, SR-Series, Radiance & Radiance+

Features: 

• Protection Against Theft
• Works with Most Cradle & Weld-on Mounts
• Two (2) 2.25 x 20 spanner nuts
• Four (4) spacer washers
• One (1) 1/4" hex nut bit

One (1) kit required per each Light

Legal Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.

Wire Harness f/10"-30" Light Bar

This 11' wiring harness is designed to connect a single 10"-30" LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: 10" E-Series, 10" SR-Series, 20" E-Series, 20" SR-Series, 30" E-Series, 30" SR-Series, 40" E-Series, 40" SR-Series.

Features:

• 16 AWG Wire
• Deutsch Connector
• Inline Fuse Holder
• 12 Volt Relay

E-Series, RDS-Series & Radiance+ Lens Cover 10" - Smoke

RIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. 

Features:

• Easy to Snap On & Off
• Polycarbonate Plastic
• Extra Layer of Protection

SR-Q Series Lens Cover - Amber

RIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. 

Features:

• Easy to Snap On & Off
• Polycarbonate Plastic
• Extra Layer of Protection

Dual Row Marine Curved LED Light Bar - 42"

Specs

• Input Voltage: 10-30V DC
• Wattage: 240 W
• (80-3W CREE LEDs)
• Raw Lumens: 19200
• LUX at 10M: 780
• Color Temperature: 6000K
• Beam Pattern: Combo/Flood 90 degrees/Spot 8 degrees

Construction

• Housing Material: Die-Cast Aluminum Housing
• Housing Color: White Coating with UV Inhibitors
• Membrane: Gore®
• Lens Material: PC
• Mounting Bracket: Die-Cast Aluminum
• Hole Dimensions:

• Brackets Turned Inward – 41 inches
• Brackets Turned Outward – 43.5 inches
• Mounting Bolt Drill – 25 inches

• Height of Light Bar Itself: 3 inches
• Depth of Light Bar Itself: 3.5 inches
• Electronics: Integrated-Epoxy Encapsulated
• Hardware: Stainless 316

Operation

• Operating Temperature: – 40 degrees C to +60 degrees C
• Current Consumption: 12 Amps at 13.8 Volts
• IP Rating: IP67
• Protections: Reverse Polarity

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

20" Dual Row Marine Bar

Specifications:

• Input Voltage: 10-30V
• Wattage: 108W
• Raw Lumens: 8640
• LUX @ 10M: 612
• Color Temperature: 6000K
• Beam Pattern: Combo: Flood (90°) / Spot (8°)

Construction:

• Housing Material: Die-cast Aluminum Housing
• Housing Color: White Coating with UV Inhibitors
• Membrane: Gore™
• Lens Material: PC
• Mounting Bracket: Die-cast Aluminum
• Hole Dimensions: Brackets turned inward - 19.50"
• Brackets turned outward - 21.75"
• Mounting Bolt Drill - .25"
• Height of Light Bar Itself: 4.8"
• Depth of Light Bar Itself: 3.50"
• Electronics: Integrated–Epoxy Encapsulated
• Hardware: Stainless 316

Operation:

• Operating Temperature: -40°C to +60°C
• Current Consumption: 5.7 Amps @ 13.8 Volts
• IP Rating: IP68
• Protections: Reverse Polarity

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Dual Row Marine LED Light Bar - 8"

SPECS

• Input Voltage: 10-30V DC
• Wattage: 36W (12-3W CREE LEDs)
• Raw Lumens: 2880
• Color Temperature: 6000K
• Beam Pattern: Combo/Flood(90deg)/Spot(8deg)

CONSTRUCTION

• Housing Material: Die-cast Aluminum Housing
• Housing Color: White Coating with UV Inhibitors
• Membrane: Gore™
• Lens Material: PC
• Mounting Bracket: Die-cast Aluminum
• Hole Dimensions: Brackets turned inward – 7.25in
• Brackets turned outward – 9.5in
• Mounting Bolt Drill – .25in
• Electronics: Integrated-Epoxy Encapsulated
• Hardware: Stainless 316

OPERATION

• Operating Temperature: -40degC to +60degC
• Current Consumption: 1.9 amps at 13.8 volts
• IP Rating: IP68
• Protections: Reverse Polarity

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Auxiliary Accent Lighting Pod - 1.5" x 3" - White

SPECS

• Input Voltage: 10-30V DC
• White: (3-5W CREE LEDs)
• Wattage: 15W
• Raw Lumens: 1200/720
• Beam Pattern: 120deg Flood

CONSTRUCTION

• Housing Material: White Die-cast Aluminum Housing
• Lens Material: PC
• Mounting: Two Rubber Bases Included
• Hardware: Stainless 316

OPERATION

• Operating Temperature: -40degC to +60degC
• Current Consumption: .2 amps at 13.8 volts
• IP Rating: IP68

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Light Bar Security Kit for RDS-Series & Radiance+ Curved Series Lights

Stainless steel security hardware kit for the RIGID RDS light family. Includes security nuts/bolts and necessary security keys for installation. Must be used along with standard hardware supplied with your light.

Features: 

• Stainless Steel Hardware
• Includes: Security Nuts/Bolts & Key

One (1) kit required per each Light

Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.

Wire Harness f/4"-6" Light Bar

This 11' wiring harness is designed to connect a single LED light to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: Dually (Single), D2 (Single), 4" E-Series, 6" E-Series, 4" SR-Series, 6" SR-Series.

Features:

• 18 AWG Wire
• Deutsch Connector
• Inline Fuse Holder

E-Series Lens Cover 6" - Amber

RIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. 

Features:

• Easy to Snap On & Off
• Polycarbonate Plastic
• Extra Layer of Protection

D-Series PRO Hybrid-Flood LED - Pair - White

The D-Series has always been the most versatile compact lighting package on the market today. RIGID has just made it professional grade with the D-Series PRO, which offers more light output than ever before thanks to recent advancements in LED technology. Available with a variety of mounting options, including surface, flush, or heavy-duty, the D-Series PRO can be utilized for virtually any lighting application. Measuring just 3” x 3”, the D-Series PRO packs a powerful punch up to 102% more raw lumens depending on the optics chosen. RIGID’s D-Series PRO (Professional Race Output) lights are available with either a black or white finish, and recent updates to the D-Series PRO include new branding and blacked-out circuit boards for a more refined look. They feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.

Features:

• Optics: Hybrid-Flood
• Color: White
• Finish Color: White
• Mount Type: Surface
• Shipping Dimensions: 6" × 8" × 6"
• Product Weight: 2.3lb
• Sold As: Pair
• Hybrid Optics
• 20° Flood Pattern
• 50,000+ Hr LED Lifespan
• Instant On / Off - No Warm Up
• RoHS Compliant
• Over / Under Voltage Protection
• Cast Aluminum Housing
• Durable Polycarbonate Lens
• Integrated Thermal Management
• GORE® Pressure Equalizing Vent
• Designed, Engineered, & Assembled in the USA
• Sealed Deutsch Connector

Specifications:

• Watts: 30
• Amp Draw: 2.14
• LED's: 4
• Raw Lumens: 3168
• Lux @ 10M: 58.19
• Beam Distance: 76.3M
• Peak Beam Intensity: 5819 cd

6 LED Marine Cube Light w/Harness - 3" - 2 Pack

Heise HE-DLWH1 Dual Light Wiring Harness Included

SPECS

• Input Voltage: 10-30V DC
• Wattage: 18W Each
• Pair (6-3W CREE LEDs)
• Raw Lumens: 1440 Each
• Color Temperature: 6000K
• Beam Pattern: 90deg Flood

CONSTRUCTION

• Housing Material: Die-cast Aluminum Housing
• Housing Color: White Coating with UV Inhibitors
• Lens Material: PC
• Mounting Bracket: Stainless Steel
• Electronics: Integrated-Epoxy Encapsulated
• Hardware: Stainless 316

OPERATION

• Operating Temperature: -40degC to +60degC
• Current Consumption: 1.2 amps at 13.8 volts per cube
• IP Rating: IP68
• Protections: Reverse Polarity

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.