Home
Sort by
Items 1-
32
of 640 total
CDTA18C 1/2DR UNIVERSAL JOINT
CDTA18C 1/2DR UNIVERSAL JOINT
Online
$7.74 for 1 EA
Retail $10.99
Mfr PN: CDTA18C
Stock: 35
|
CDTA18C 1/2DR UNIVERSAL JOINT
|
Online
$7.74 for 1 EA
Retail $10.99
Mfr PN: CDTA18C
Stock: 35
CDTA17C 3/8DR UNIVERSAL JOINT
CDTA17C 3/8DR UNIVERSAL JOINT
Online
$7.29 for 1 EA
Retail $9.99
Mfr PN: CDTA17C
Stock: 35
|
CDTA17C 3/8DR UNIVERSAL JOINT
|
Online
$7.29 for 1 EA
Retail $9.99
Mfr PN: CDTA17C
Stock: 35
SMALL PARTS & SEALS
SMALL PARTS & SEALS
Online
$2.49 for EA
Retail $2.33
Mfr PN: YSPBLT-012
Stock: 29
|
SMALL PARTS & SEALS
|
Online
$2.49 for EA
Retail $2.33
Mfr PN: YSPBLT-012
Stock: 29
SPICER DANA 30 NODULAR IRON DIFFERENTIAL COVER
SPICER DANA 30 NODULAR IRON DIFFERENTIAL COVER
Online
$145.20 for EA
Mfr PN: 10023534
Stock: 25
|
|
Online
$145.20 for EA
Mfr PN: 10023534
Stock: 25
HUB COVER 5 ON 4-1/2IN - FOR 2,000 LBS - 3,500 LBS AXLE; CHROME ABS
HUB COVER 5 ON 4-1/2IN - FOR 2,000 LBS - 3,500 LBS AXLE; CHROME ABS
Online
$15.33 for EA
Mfr PN: QT545CHS
Stock: 25
|
|
Online
$15.33 for EA
Mfr PN: QT545CHS
Stock: 25
DANA 44 DIFF COVER - PC
DANA 44 DIFF COVER - PC
Online
$131.72 for EA
Mfr PN: 42-11-044-PC
Stock: 25
|
Poison Spyder Bombshell Diff Covers are designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards. The stock covers your Jeep came with are weak, stamped sheetmetal. Even a moderate tap with a rock can cave it in against your ring gear, causing potential damage to the gears, locker and carrier bearings, not to mention a difficult, messy trail fix. Even more common, though less catastrophic, is "peel back" that can occur when sliding over a rock causes the lip of the cover to peel up, allowing your gear oil to drain causing a hazard for both your Jeep and the environment. The Bombshell Diff Cover is your best insurance against each of these hazards. The Bombshell differential cover is cast from highly ductile nodular iron—the same material drag racing differential housings are cast from to handle thousands of horsepower. The design of the Bombshell incorporates recesses to protect the diff cover bolt heads from trail damage, while the profile of the Bombshell acts as a ramp to help slide your Jeep up and over the most troublesome pumpkin-eaters. The ramp profile also results in an extremely thick & up to 1" thick—cross-section around the bolt ring, where contact with the rocks is most likely. Throughout the rest of its cross-section the Bombshell is the thickest cast differential cover on the market, from 7/16" to a brutal 1/2" thick at the outermost surface. Dana 44;Cast ductile nodular iron;Black powder coat;Steel;Thickest cast differential cover
|
Online
$131.72 for EA
Mfr PN: 42-11-044-PC
Stock: 25
HIGH PERFORMANCE YUKON RING & PINION GEAR SET FOR GM 825IN IFS REVERSE ROTATION
HIGH PERFORMANCE YUKON RING & PINION GEAR SET FOR GM 825IN IFS REVERSE ROTATION
Online
$452.89 for EA
Mfr PN: YGGM8.25-456R
Stock: 25
|
|
Online
$452.89 for EA
Mfr PN: YGGM8.25-456R
Stock: 25
Online
$12.47 for EA
Mfr PN: 04226
Stock: 25
ADAPTER SLEEVE FRO GM 11.5IN & 10.5IN 14 BOLT TRUCK YOKES TO USE TRIPLE LIP PINI
ADAPTER SLEEVE FRO GM 11.5IN & 10.5IN 14 BOLT TRUCK YOKES TO USE TRIPLE LIP PINI
Online
$21.89 for EA
Mfr PN: YYGM26060977
Stock: 25
|
|
Online
$21.89 for EA
Mfr PN: YYGM26060977
Stock: 25
YUKON MASTER OVERHAUL KIT FOR DANA 44 REAR DIFFERENTIAL FOR USE WITH NEW 07+ NON
YUKON MASTER OVERHAUL KIT FOR DANA 44 REAR DIFFERENTIAL FOR USE WITH NEW 07+ NON
Online
$529.14 for EA
Mfr PN: YKD44-JK-STD
Stock: 25
|
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon's Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Comes with 7/16" & 1/2" ring gear bolts.
|
Online
$529.14 for EA
Mfr PN: YKD44-JK-STD
Stock: 25
TRAC BAR BRCKT/2.5-3.5IN 08-13 F250/F350 4WD
TRAC BAR BRCKT/2.5-3.5IN 08-13 F250/F350 4WD
Online
$179.99 for EA
Mfr PN: 62687
Stock: 25
|
Make sure your track bar is properly relocated after lifting your vehicle to keep your axles and wheels tracking straight
|
Online
$179.99 for EA
Mfr PN: 62687
Stock: 25
REPLACEMENT AXLE BEARING AND SEAL KIT FOR JEEP JK REAR
REPLACEMENT AXLE BEARING AND SEAL KIT FOR JEEP JK REAR
Online
$123.89 for EA
Mfr PN: AKD44JK
Stock: 25
|
|
Online
$123.89 for EA
Mfr PN: AKD44JK
Stock: 25
07-17 JEEP WRANGLER BALL JOINT KIT DANA 60 BUILDER AXLE COMPATIBLE
07-17 JEEP WRANGLER BALL JOINT KIT DANA 60 BUILDER AXLE COMPATIBLE
Online
$99.78 for EA
Mfr PN: 708238
Stock: 24
|
|
Online
$99.78 for EA
Mfr PN: 708238
Stock: 24
QUAD RING XR136V75
QUAD RING XR136V75
Online
$8.17 for EA
Mfr PN: 160207-2
Stock: 23
|
QUAD RING XR136V75
|
Online
$8.17 for EA
Mfr PN: 160207-2
Stock: 23
YUKON GEAR & INSTALL KIT PACKAGE FOR JEEP JK NON-RUBICON/488 RATIO
YUKON GEAR & INSTALL KIT PACKAGE FOR JEEP JK NON-RUBICON/488 RATIO
Online
$790.61 for EA
Mfr PN: YGK013
Stock: 22
|
Yukon Gear & Install Kit package for Jeep JK non-Rubicon, 4.88 ratio. This is a complete package that includes front & rear ring & pinion sets along with the most complete master overhaul kits on the market, giving you everything you need to re-gear the front & rear differential in one easy part number.
|
Online
$790.61 for EA
Mfr PN: YGK013
Stock: 22
12-14: JEEP - SUVS & TRUCKS CENTERFORCE II CLUTCH KIT
12-14: JEEP - SUVS & TRUCKS CENTERFORCE II CLUTCH KIT
Online
$974.95 for EA
Mfr PN: KCFT379176
Stock: 22
|
The Centerforce ® II Clutch Series utilizes a full facing disc with premium friction materials and a pressure plate with patented centrifugal weights (where applicable). Furthermore, static clamp load is increased via our patented machining processes; this combination allows superb holding power and maximum clutch life, making this clutch ideal for selected street/strip, off-road and towing applications. Pressure plate and disc SOLD SEPARATELY on some applications.
|
Online
$974.95 for EA
Mfr PN: KCFT379176
Stock: 22
HIGH PERFORMANCE YUKON REPLACEMENT RING & PINION GEAR SET FOR DANA 44 JK REAR IN
HIGH PERFORMANCE YUKON REPLACEMENT RING & PINION GEAR SET FOR DANA 44 JK REAR IN
Online
$381.89 for EA
Mfr PN: YGD44JK-488RUB
Stock: 21
|
|
Online
$381.89 for EA
Mfr PN: YGD44JK-488RUB
Stock: 21
YUKON MASTER OVERHAUL KIT FOR DANA 30 REVERSE ROTATION DIFFERENTIAL FOR USE WITH
YUKON MASTER OVERHAUL KIT FOR DANA 30 REVERSE ROTATION DIFFERENTIAL FOR USE WITH
Online
$428.14 for EA
Mfr PN: YKD30-JK
Stock: 20
|
|
Online
$428.14 for EA
Mfr PN: YKD30-JK
Stock: 20
1 1/2IN REAR LEVELING KIT
1 1/2IN REAR LEVELING KIT
Online
$129.99 for EA
Mfr PN: KT09135BK
Stock: 20
|
|
Online
$129.99 for EA
Mfr PN: KT09135BK
Stock: 20
2 1/2IN FORGED JOHNNY JOINT W/ 1 1/4IN RIGHT HANDED THREADED STUD
2 1/2IN FORGED JOHNNY JOINT W/ 1 1/4IN RIGHT HANDED THREADED STUD
Online
$67.76 for EA
Mfr PN: CE-9114
Stock: 20
|
Forged Johnny Joint® rod ends feature forged steel construction, a 1-1/4"-12 right hand threaded shank and come fully assembled with our standard Johnny Joint® internals (2.625" wide ball center with a 9/16" thru bolt hole). These units are externally greasable via a zerk fitting. Units will also accept our 9/16" greasable thru bolts as well (available seperately). Finished in gold zinc plating. We also keep the jam nuts for these units on hand at all times as well. These can be used in any Currie adjustable lower control arm, as well as in any type of universal application for those building their own arms.
|
Online
$67.76 for EA
Mfr PN: CE-9114
Stock: 20
YUKON GEAR & INSTALL KIT PACKAGE FOR JEEP JK NON-RUBICON/456 RATIO
YUKON GEAR & INSTALL KIT PACKAGE FOR JEEP JK NON-RUBICON/456 RATIO
Online
$790.61 for EA
Mfr PN: YGK012
Stock: 19
|
Yukon Gear & Install Kit package for Jeep JK non-Rubicon, 4.56 ratio. This is a complete package that includes front & rear ring & pinion sets along with the most complete master overhaul kits on the market, giving you everything you need to re-gear the front & rear differential in one easy part number.
|
Online
$790.61 for EA
Mfr PN: YGK012
Stock: 19
07-13 WRANGLER REAR GLIDE PLATE
07-13 WRANGLER REAR GLIDE PLATE
Online
$178.74 for EA
Mfr PN: RS6242
Stock: 19
|
|
Online
$178.74 for EA
Mfr PN: RS6242
Stock: 19
14-C POLARIS RZR 900/1000/TURBO MAGNUM GRIP GATED SHIFTER DIRECT FIT
14-C POLARIS RZR 900/1000/TURBO MAGNUM GRIP GATED SHIFTER DIRECT FIT
Online
$340.69 for EA
Mfr PN: 81151
Stock: 17
|
|
Online
$340.69 for EA
Mfr PN: 81151
Stock: 17
2.5IN JOHNNY JOINT ROD EN
2.5IN JOHNNY JOINT ROD EN
Online
$71.41 for EA
Mfr PN: CE-9110
Stock: 17
|
For fabricators and suspension system builders. Currie's Johnny Joints® offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint® rod ends are made with a high-density, "tough 88" urethane that encases the inner ball. It is a very durable material, and is impervious to weather. The special center ball is heat-treated steel for extra strength, cross-drilled for thru-bolt lubrication, features a 9/16" thru bolt hole, and a 2 5/8" mounting width. The outer shell is .180" DOM tubing, and the retaining washers are heat-treated steel. 9/16" greasable bolt with nut and washers included. Sold each.
|
Online
$71.41 for EA
Mfr PN: CE-9110
Stock: 17
YUKON DURA GRIP FOR DANA 44/30 SPLINE/373 & DOWN
YUKON DURA GRIP FOR DANA 44/30 SPLINE/373 & DOWN
Online
$757.89 for EA
Mfr PN: YDGD44-3-30-1
Stock: 17
|
|
Online
$757.89 for EA
Mfr PN: YDGD44-3-30-1
Stock: 17
HARDCORE DIFF COVER FOR DANA 44
HARDCORE DIFF COVER FOR DANA 44
Online
$245.89 for EA
Mfr PN: YHCC-D44
Stock: 17
|
|
Online
$245.89 for EA
Mfr PN: YHCC-D44
Stock: 17
YUKON GEAR & INSTALL KIT PACKAGE FOR JEEP JK NON-RUBICON/513 RATIO
YUKON GEAR & INSTALL KIT PACKAGE FOR JEEP JK NON-RUBICON/513 RATIO
Online
$790.61 for EA
Mfr PN: YGK014
Stock: 17
|
Yukon Gear & Install Kit package for Jeep JK non-Rubicon, 5.13 ratio. This is a complete package that includes front & rear ring & pinion sets along with the most complete master overhaul kits on the market, giving you everything you need to re-gear the front & rear differential in one easy part number.
|
Online
$790.61 for EA
Mfr PN: YGK014
Stock: 17
D/F AMC 86-98
D/F AMC 86-98
Online
$369.95 for EA
Mfr PN: DF193890
Stock: 16
|
The Centerforce Dual-Friction clutch set is a performance matched pressure plate and disc combination. Centerforce Dual-Friction pressure plates feature their patented centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual-Friction disc has a full facing on the pressure plate side for drivability and longevity, while a carbon composite puc style (segmented) facing is used on the flywheel side for a positive engagement and increased holding-capacity. Dual Friction is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications. The patented Centerforce Dual-Friction disc system distributes pressure plate clamping force evenly over a 360-degree friction-facing on one side of the clutch disc, while the opposing side uses a segmented friction-facing to concentrate clamping pressure and maximize clutch holding-capacity. This combination of dual configured friction-facings, coupled with our performance pressure plate, creates the ultimate clutch system that is engineered for smooth drivability, maximum longevity and awesome grip!
Fits 1986 to 2006 Jeep with 4.0L 242 and 4.2L 258 6 cylinder engine
Clutch and pressure plate
10.4" diameter x 1-1/8"-12 spline
|
Online
$369.95 for EA
Mfr PN: DF193890
Stock: 16
YUKON MASTER OVERHAUL KIT FOR 09 & DOWN FORD 88IN DIFFERENTIAL
YUKON MASTER OVERHAUL KIT FOR 09 & DOWN FORD 88IN DIFFERENTIAL
Online
$225.38 for EA
Mfr PN: YKF8.8-A
Stock: 15
|
|
Online
$225.38 for EA
Mfr PN: YKF8.8-A
Stock: 15
HIGH PERFORMANCE YUKON REPLACEMENT RING & PINION GEAR SET FOR DANA 30 JK SHORT R
HIGH PERFORMANCE YUKON REPLACEMENT RING & PINION GEAR SET FOR DANA 30 JK SHORT R
Online
$307.89 for EA
Mfr PN: YGD30SR-456JK
Stock: 15
|
|
Online
$307.89 for EA
Mfr PN: YGD30SR-456JK
Stock: 15
07-17 WRANGLER JK ULTIMATE DANA 44 AXLE ASSEMBLY (JK 4.88 RATIO) FRONT - ELD
07-17 WRANGLER JK ULTIMATE DANA 44 AXLE ASSEMBLY (JK 4.88 RATIO) FRONT - ELD
Online
$5169.99 for EA
Mfr PN: 10010521
Stock: 15
|
Engineered for all Jeep® Wrangler ® JKs, 2007 to current, the Ultimate Dana 44™ axle is a direct bolt-in solution and requires you to reuse your stock wheel ends. Featuring a number of upgrades for added on-trail durability, plus added strength wherever you take your vehicle, the Ultimate Dana 44™ axle is built to meet the demands of serious off-road enthusiasts.
|
Online
$5169.99 for EA
Mfr PN: 10010521
Stock: 15
HIGH PERFORMANCE YUKON RING & PINION GEAR SET FOR GM 85IN & 86IN IN A 373 RATIO
HIGH PERFORMANCE YUKON RING & PINION GEAR SET FOR GM 85IN & 86IN IN A 373 RATIO
Online
$381.89 for EA
Mfr PN: YGGM8.5-373
Stock: 14
|
|
Online
$381.89 for EA
Mfr PN: YGGM8.5-373
Stock: 14
|
|
|
|
Copyright © 1999-2022 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |