For dealership warranty requirements, insures extended drivetrain warranties compliance. Fast-curing formula. Low odor, non-corrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistance properties.-54 to 260 degrees C
(-65 to 500 degrees F) intermittent temperature range. Resists auto and shop fluids and vibration. Use for valve covers, oil pans, intake manifold end seals, timing covers and transmission pans.
Carded Tube
Size=3.35 Oz
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
|
For easier, cleaner oil changes. Large opening with spout for easier pouring and dispensing. Molded handle for convenient carrying. Also for draining antifreeze. Resistant to chemicals and solvents; will not rust, dent, or corrode.
Cap Gal=5
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
For easier, cleaner oil changes. Large opening with spout for easier pouring and dispensing. Molded handle for convenient carrying. Also for draining antifreeze or transmission fluid. Resistant to chemicals and solvents; will not rust, dent, or corrode. H
olds up to 3 oil changes. Black with black closure and spout.
Cap Qt=15
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Factory style replacement part
Fits 1974 to 1991 SJ Full Size and J-series truck
Fits 1986 CJ
Fits 1987 to 2001 Wrangler
Fits 1987 to 1990 XJ Cherokee
Fits 1987 to 1990 MJ Comanche
Black gasket
With Dana 44 axles
|
Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker„˘ gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Locker's signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
Dana 44
No additional sealant needed
Elastomer beading on both sides of gasket
No setup time
Will not fit Nissan Titan
|
Fits XJ Cherokee, 1985-00 with nondisconnect axle and 1984-91 with disconnect axle.
All Dana 25, 27 and 30
Made of gasket paper
|
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturer's warranty.
Fits 1972 to 1979 CJ
2 shift rod oil seals
2 output shaft oil seals
5 gaskets
|
OEM specified. For dealership warranty requirements, ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistance proper
ties. Temperature range -65 to 500 degreesF (-54 to 260 degreesC) intermittent. Resists auto and shop fluids and vibration. Non-flammable, non-toxic.
Size Oz=.5
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Slow drying, non-hardening sealant designed for sealing cut gaskets and stamped parts. Allows for easy disassembly if required. -65 to 400 degrees Fahrenheit temperature range. Resists common shop fluids and fuels. Use where sealing is more important tha
n adhesion for valve cover and oil pan gaskets. Use on gaskets, flanges, pipe joints and threaded connections.
Size Oz=3
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
|
The Rapid Air Deflator accurately and rapidly reduces tire pressure in seconds for improved off-road performance. This tool will give you the precise air pressure you need utilizing a calibrated dial with 1PSI increments. With an easy to read 0-60 PSI 2" gauge, take the guess work out of airing down. UNIVERSAL TIRE DEFLATOR Universal;Corrosion resistant;Brass, stainless deflator tool; Fully geared precision movement; Easy to read calibrated dial with 1PSI increments; 0-60 PSI operating range; Protective rubber gauge housing; Included MOLLE protective storage case
|
M1 RIVETS 42/SET
|
1-14 RH FEMALE
|
Rubicon Express has everything you need to protect the vulnerable undercarriage of your Jeep Wrangler JK from front to back, with skid plates for your engine oil pan, transfer case, and fuel tank. All of the skidplates are CNC laser cut from 3/16-inch steel to withstand even the worst abuse, and are designed to mount up tight to the drivetrain to maximize ground clearance. The modular protection system allows you to add skidplates as your needs and budget allow without any concerns about compatibility. Fits 2012 to 2016 JK Wrangler, Rubicon and Unlimited;2 and 4-door models;Black powder coat;High, tight mounting methods to provide protection while not affecting clearance;3/16 steel construction for ultimate protection;No cutting or modification to existing components;Uses existing hardware/fasteners;Designed to reduce obstacle hang ups and improve slide over terrain;Precision CNC laser cut and formed for an unrivaled fit and finish;Designed to work with all Rubicon Express suspension systems
|
Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker„˘ gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coated and have Lube Locker's signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed!
Dana 35
No additional sealant needed
Elastomer beading on both sides of gasket
No setup time
|
This 3 Leaf Progressive Add a Leaf Kit comes complete with U-bolts and Center pins for an easy install. This add a leaf kit will give your Tacoma / Tundra 1.5" of lift after installation. Just remove the factory overload and say good bye to that rough factory ride.
|
Product No: 21M114-0127
Made by: Briggs-Stratton Snow Intek Alternator 3Amp Overhead Valve Design Electric Start: 110 Volt Starter Horizontal Shaft Mounting Fuel Tank: 1 gallon Shaft Size: 3/4"Dx2-5/16"L Muffler: Included Made For: Snow Blower Shipping Weight: 74 Pounds Condition: New Warranty: 2-Year Manufacturer's Warranty ![]() |
D60 & D70 COVER GASKET
|
These extremely hard to find Closed Knuckle and King Pin parts are now available directly from Dana Spicer.
Dana 60
Fits Upper and Lower: Sold Individually
|
Product No: OILDRAIN-12774
Made by: Dapco Manufacturer Part No: 12774 Shipping Weight: 1 Pounds Condition: New |
Rubicon Express has everything you need to protect the vulnerable undercarriage of your 12-15 with the 3.6L Jeep Wrangler JK from front to back, with skid plates for your engine oil pan, transfer case, and fuel tank. All of the skidplates are CNC laser cut from 3/16-inch steel to withstand even the worst abuse, and are designed to mount up tight to the drivetrain to maximize ground clearance. The modular protection system allows you to add skidplates as your needs and budget allow without any concerns about compatibility. Fits 2012 to 2016 JK Wranger, Rubicon and Unlimited;2 and 4-door models;Black powder coat;High, tight mounting methods to provide protection while not affecting clearance;3/16 steel construction for ultimate protection;No cutting or modification to existing components;Uses existing hardware/fasteners;Designed to reduce obstacle hang ups and improve slide over terrain;Precision CNC laser cut and formed for an unrivaled fit and finish;Designed to work with all Rubicon Express suspension systems
|
Product No: CH395-3103
Made by: Kohler Command Pro Cyclone Air Filter Overhead Valve Design Cast Iron Cylinder Sleeve Low Oil Shutdown Electric Start: No Horizontal Shaft Mounting Fuel Tank: 1.85 Gallon Shaft Size: 1"x3-21/32" EXT THD Muffler: Included Oil Capacity: 1.2 Quarts (38oz) Oil Type: 10W-30 Made For: Water Pump Shipping Weight: 45 Pounds Condition: New Warranty: 3-Year Manufacturer's Warranty |
WASHER - 1.2MM T
|
For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep® vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
|
For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep® vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |