Losing your keys or locking yourself out of the car can be frustrating. This Universal 10-Piece Vehicle Unlock Tool Kit has everything you need to get into your car fast. Use the included convenient pouch to store the two slide lock tools two plastic wedges two thin steel bars Wonder tool plastic coat hanger wire-form s-hook and gas lock tool. Feature:
|
This 18 .in stained and sealed solid wood tire thumper lets you know if your tires are fully pressurized by making a thump as it hits the rubber. Just swing the thumper and listen for the sound. If your tires are low in pressure it makes a different sound. Features a weighted end with metal bolt and a nylon cord for hanging. Measures 18.5 .in length x 1.25 .in diameter.
|
This valve stem remover is designed for fast removal and installation of valve stem cores. It has a notched tip for reaching recessed valve cores and a 3 .in handle with 2 .in stem.
|
This 19 inch wooden tire thumper lets you know if your tires are fully pressurized by making a thump as it hits the rubber. Just swing the thumper and listen for the sound. If your tires are low in pressure it makes a different sound.
|
This digital pocket thermometer provides an accurate temperature reading from -40°F to 302°F. It includes a pen clip style case along with a spare battery.
|
This easy to read large dial tire gauge measures up to 160 psi|1100kPa. The pressure release valve holds pressure reading until released and the rubber housing provides extra protection to the dial. 2.5-inch diameter dial and 1.75-inch stem.
|
This 1 .in easy-to-read dial thermometer has an accurate reading from -40°F to 180°F and includes pen clip style case.
|
This 1.75 inch thermometer is easy-to-read and provides an accurate reading from -40°F to 180°F and includes a pen clip style case.
|
OTFR001 4WD FULL RECOVERY KIT Feature:
|
AUTOMOTIVE REPAIR CAST
Includes one 2"x36" wrap, gloves & securing ba-
ndage
Easy to use like a cast: Wet, apply, done
Temperature resistant up to 400 degrees F
Works on radiator & heater, tailpipes & muffle-
rs, oil & transmission lines, vacuum lines, ou-
tside mirrors & roof racks, and RV & boat emer-
gency repairs
Repair wrap,tape,fiberglass,tailpipe,muffler
38237 AUTO REPAIR CAST 2 IN. X36
|
|
The OEM TOOLS 25355 24 Inch Straight Edge features a precision ground edge designed to inspect engine blocks and cylinder heads for distortion, making it the perfect addition to a machinist's toolbox. Our cylinder head tool also inspects for distortion or flatness on fly wheels, main bearing saddles, cam bearing saddles, cam covers and bell housings. These precision machined tools are designed to work with a sensor gauge to perform precise automotive repairs. This cylinder gauge tool features a precision +/- 0.001 inch ground edge for inspections, making it one of the highest precision instruments on the market for accuracy. It's nearly impossible to visually inspect for defects or feel a cylinder head for flatness, and our precision tool provides the best way to measure your cylinder head correctly. This heavy duty automotive straight edge steel tool is made in the USA from 1/4 inch cold rolled steel for strength and durability, and this precision steel tool features a durable black powder coat finish that resists rust and corrosion. Our 24-inch straight edge tool includes a convenient hanging hole for easy storage, and this mechanical straight edge comes in a reusable protective edge. and our precision tool provides the best way to measure your cylinder head correctly. This heavy duty automotive straight edge steel tool is made in the USA from 1/4 inch cold rolled steel for strength and durability, and this precision steel tool features a durable black powder coat finish that resists rust and corrosion. Our 24-inch straight edge tool includes a convenient hanging hole for easy storage, and this mechanical straight edge comes in a reusable protective edge. and our precision tool provides the best way to measure your cylinder head correctly. This heavy duty automotive straight edge steel tool is made in the USA from 1/4 inch cold rolled steel for strength and durability, and this precision steel tool features a durable black powder coat finish that resists rust and corrosion. Our 24-inch straight edge tool includes a convenient hanging hole for easy storage, and this mechanical straight edge comes in a reusable protective edge. and this precision steel tool features a durable black powder coat finish that resists rust and corrosion. Our 24-inch straight edge tool includes a convenient hanging hole for easy storage, and this mechanical straight edge comes in a reusable protective edge. and this precision steel tool features a durable black powder coat finish that resists rust and corrosion. Our 24-inch straight edge tool includes a convenient hanging hole for easy storage, and this mechanical straight edge comes in a reusable protective edge.
|
Although the Hi-Lift 4xRAC was designed with Jeep® owners in mind, it may be installed on any flat surface 2-1/2 wide or more. Drilling required. Kit includes: 2 mounting brackets, 2 mounting bracket caps, 2 wing nuts, 8 hex head cap screws, 8 nyloc nuts, 1 handle strap.
It may be installed on any flat surface 2-1/2" wide or more
Kit includes 2 mounting brackets, 2 mounting bracket caps, 2 wing nuts, 8 hex head cap screws, 8 nyloc nuts and 1 handle strap
|
Designed for mounting a Hi-Lift® jack to round and square tube bumpers, bull bars, roll cages, and roof racks. Allows for easy and adjustable mounting on round tube from 1" up to 3" in diameter. The large set is designed for round tube from 2-3" in diameter that will work on most vehicle bull bars and roll cages. The small set is designed for round tube from 1-2" in diameter, which works on many roof racks, and also ATV/UTV bars, bumpers and roll cages.
Fits 1"-2" diameter bars
Manufactured of 6061-T6 structural aluminum
Stainless steel hardware
Securely stores your Hi-Lift® jack
|
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate.
Cast and steel jack
Red powder coat
Overall length: 46"
Max lift height: 34"
Weight: 28lbs.
|
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate.
Cast and steel jack
Black powder coat
Overall length: 44"
Max lift height: 32"
Weight: 27lbs.
|
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate. Cast and steel jack Black powder coat Overall length: 60" Max lift height: 48" Weight: 31lbs.
|
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate.
Cast and steel jack
Red powder coat
Overall length: 60"
Max lift height: 50"
Weight: 32lbs.
|
|
This item can NOT be shipped to these states CA
BULLDOG(R) 8000 LB TOPWIND DIRECT WELD JACK Square tube direct weld jack Has topwind crank - 15" travel Drop leg with heavy-duty base provides - 13-1/2" of additional adjustment 190704 DIRECT WELD JACK SIZE:8,000 Lb. COLOR:Gray |
For agriculture, automotive, offroad, hardware, industrial and DIY uses. Multi purpose, for lifting, winching and clamping. Low pick-up with lifting nose only 4-1/2'' from bottom of base plate. 4-1/2'' lifting nose for safe, positive contact with load. 28
square inch base plate for extra stability. Complete with adjustable top clamp clevis for use in clamping and winching. For speedy disengaging, lifting unit automatically drops away when load is removed. Safety bolt is designed to shear at 7,000 pounds.
Approximate weight 30 pounds.
Hght In=48
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
|
|
Rancho® Jeep JL Geometry Correction Brackets deliver perfect fit, finish and performance. These next-level Rancho Jeep JL Geometry Correction Brackets keep the control arms at factory angles to deflect road harshness, reduce brake dive and allow for proper caster angle after the addition of an aftermarket lift kit…maximizing the performance of your Jeep Wrangler JL. This NEW bracket fits Jeeps running lift kits from 2- to 4.5-inches utilizing our unique 3-hole upper control arm locator. Rancho engineering fit and finish delivers a one-piece welded design that will bolt up directly to the factory locations out of the box, saving you time and aggravation.
|
Designed for mounting a Hi-Lift® jack to round and square tube bumpers, bull bars, roll cages, and roof racks. Allows for easy and adjustable mounting on round tube from 1" up to 3" in diameter. The large set is designed for round tube from 2-3" in diameter that will work on most vehicle bull bars and roll cages. The small set is designed for round tube from 1-2" in diameter, which works on many roof racks, and also ATV/UTV bars, bumpers and roll cages.
Fits 2"-3" diameter bars
Manufactured of 6061-T6 structural aluminum
Stainless steel hardware
Securely stores your Hi-Lift® jack
|
HI-LIFT ALL-CAST JACK
The only all-cast jack manufactured - made -
of high yield & tensile strength iron castings
7,000 lb. tested capacity
Lifts, winches, clamps and more
Top winch-connector clamp
Powder-coated finish w/zinc plated hardware
Includes safe use and load rating information
2-piece handle & socket - proven, durable design
HL-485 48 IN. HI-LIFT JACK
SIZE:48"
COLOR:Red
|
Smittybilt brings to you the New 9-Piece Torx - Multi Tool Kit. This all in one set offers all you would need with a tool kit. Don't be stuck again driving around with bulky tool sets. This is just the perfect size to store in the back of your Jeep for those unforeseen times. This is a perfect on-road/off-road tool kit.
|
The Flashcal for the 2020 Gladiator JT! Gladiator owners aren't leaving their rigs stock and Superchips is here to help with the tire and gear options Flashcal provides. Enjoy seamless functionality to accommodate the lift, suspension, and tires you've installed on your Gladiator. Superchips has loaded the Flashcal PN 3571-JT with the most sought-after features. Configure your Gladiator to review all product features. The team at Superchips spells out how to install your Flashcal to take advantage of tire size, gear ratio, TPMS adjust and more. Enjoy the ride with the Flashcal for JT Gladiator!
|
|
|
|
|
Copyright © 1999-2022 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |