|
Replace your ugly factory metal shaft antenna with this stylish yet functional low profile (13 inch) flexible rubber antenna that will not hit the garage door!
|
If you took the proven features and performance of the famous "KW" series antennas and added a unique tuning mechanism to the top, you would own the equivalent of a Firestik II, "FS" Series antenna. Aside from the ease of tuning, the patented design broadens the antennas bandwidth to keep SWR lower over more channels. The upper coil extension also increases the power handling capability of the antenna. All "FS" antennas are compatible with autos, trucks, vans, motorcycles and ATV's in a single antenna configuration when metallic ground plane is available. Or, they may be used in dual (co-phased) configuration on any vehicle made from any type of material. Like all CB antennas, the "FS" antennas should be fine-tuned (SWR) in their final mounting location. If you have ever tuned a non-tunable tip antenna, you will have a real appreciation for the "FS" antennas. To tune a "FS" antenna, you just pop-of the tip and turn the adjustment screw up or down as needed. All "FS" antennas exceed the requirements of any CB radio, new or old. Aside from the hi-performance loading coil that maximizes the transmit/receive functions of your CB, these top-loaded antennas will also receive the NOAA emergency weather alert and national weather broadcasts for radios with those features. The "FS" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced shaft. Each is wound with heavy insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas. The tunable tip mechanism is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning. Our 3/8"-24 threaded base has a tapered contact point that works especially well with Firestik mounts and accessories. The tapered "lug-nut" effect transfers stress away from the threads and reduces the possibility of vibration induced loosening of the antenna in its mount. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. For peak performance we recommend that you use one of our 18-foot Fire-Flex coaxial cables with these antennas #DASTS-8X18. All "FS" series antennas are factory bench tested for resonant frequency and overall quality. Don't forget ... ALL antennas, regardless of style or manufacturer, MUST be tuned after installation on the vehicle. Transmitting antennas are not "plug-n-play" devices. 5 Year Limited Warranty.
|
If you took the proven features and performance of the famous "KW" series antennas and added a unique tuning mechanism to the top, you would own the equivalent of a Firestik II, "FS" Series antenna. Aside from the ease of tuning, the patented design broadens the antennas bandwidth to keep SWR lower over more channels. The upper coil extension also increases the power handling capability of the antenna. All "FS" antennas are compatible with autos, trucks, vans, motorcycles and ATV's in a single antenna configuration when metallic ground plane is available. Or, they may be used in dual (co-phased) configuration on any vehicle made from any type of material. Like all CB antennas, the "FS" antennas should be fine-tuned (SWR) in their final mounting location. If you have ever tuned a non-tunable tip antenna, you will have a real appreciation for the "FS" antennas. To tune a "FS" antenna, you just pop-of the tip and turn the adjustment screw up or down as needed. All "FS" antennas exceed the requirements of any CB radio, new or old. Aside from the hi-performance loading coil that maximizes the transmit/receive functions of your CB, these top-loaded antennas will also receive the NOAA emergency weather alert and national weather broadcasts for radios with those features. The "FS" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced shaft. Each is wound with heavy insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas. The tunable tip mechanism is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning. Our 3/8"-24 threaded base has a tapered contact point that works especially well with Firestik mounts and accessories. The tapered "lug-nut" effect transfers stress away from the threads and reduces the possibility of vibration induced loosening of the antenna in its mount. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. For peak performance we recommend that you use one of our 18-foot Fire-Flex coaxial cables with these antennas #DASTS-8X18. All "FS" series antennas are factory bench tested for resonant frequency and overall quality. Don't forget ... ALL antennas, regardless of style or manufacturer, MUST be tuned after installation on the vehicle. Transmitting antennas are not "plug-n-play" devices. 5 Year Limited Warranty.
|
REPL ANTENNA ASSEMBLY
|
For CB mounts and cables.
|
12" AM/FM EXTENSION CABLE
|
12ft antenna adapter extension cable with built-in capacitor; Universal cable with Motorola(R) connectors
|
48" AM/FM EXTENSION CABLE
|
|
The Rugged Ridge Reflex Antenna implements a shorter antenna design and a flexible material in its construction, making it a practical antenna solution for any Jeep TJ or JK (adapters included). Lower antenna height significantly reduces the risk of the antenna being struck by tree limbs, trail hazards and even those damaging automated car washes. The Reflex Antenna is so resilient that it just bends over to release anything that may become hung on it and then returns to an upright position. Fitted with the proper threaded adapter for the application makes the Reflex Antenna a breeze to install. Available in multiple sizes- 6, 9, 13, 15 and 21-inch lengths.
|
ANTENNA REFLEX 13-INCH JK
|
ANT. ADAPTOR FOR NOKIA W/TNC FEMALE
|
100% Oxford polyester orange safety flag mounted on a white flexible 3/8" fiberglass rod. The colorful PVC shrink tubing protects each rod from sun-splintering and deterioration, in addition to providing increased durability and enhanced color visibility. Our special composite blend of fiberglass and resin makes our rod the most durable choice for any safety flag application. The 3/8"-24 threaded base is compatible with a large variety of brackets, mounts, springs, quick disconnects and other mounting hardware.
|
The Rugged Ridge Reflex Antenna implements a shorter antenna design and a flexible material in its construction, making it a practical antenna solution for any Jeep TJ or JK (adapters included). Lower antenna height significantly reduces the risk of the antenna being struck by tree limbs, trail hazards and even those damaging automated car washes. The Reflex Antenna is so resilient that it just bends over to release anything that may become hung on it and then returns to an upright position. Fitted with the proper threaded adapter for the application makes the Reflex Antenna a breeze to install. Available in multiple sizes- 6, 9, 13, 15 and 21-inch lengths.
|
Use spring on a mount, vehicle body or available bracket to accept our standard 3/8-24 threaded flags. Can be mounted in any hole from 3/8" (10mm) to 1/2" (13mm). Has a body diameter of 0.800" (20mm) and a mounted height of 3.16" (80mm). Has a stainless steel body. All mounting hardware is stainless steel.
|
Rugged Ridge Elite Antenna Base allows you to modernize the appearance of one of the most over-looked parts of your Jeep- the antenna! Featuring the same bold styling you’ve come to expect from our Elite line of accessories, the Elite Billet Antenna Base is built from high-quality die cast aluminum and is offered in a variety of premium finishes: a textured black powder coat, a vibrant red powder coat or a classic raw aluminum finish. Each Elite Billet Antenna Base comes with our versatile 6-inch Reflex antenna, mounting hardware and a gasket to help protect your paints finish from damage. Make your JK truly stand out in a crowd- make it one of the Elite. Patent Pending.
|
ANTENNA REFLEX 13-INCH TJ
|
The most popular wire-wound CB antenna in the world. This is the original Firestik design, and a proven performer since 1975. The "KW" antennas are compatible with autos, trucks, vans, motorcycles and ATV's in a single antenna configuration when metallic ground plane is available. Or, they may be used in dual (co-phased) configuration on any vehicle made from any type of material. Like all CB antennas, the "KW" antennas require fine-tuning (SWR) in their final mounting location. The loading coil on all "KW" antennas is easily accessible for precise SWR adjustments. All "KW" antennas exceed the requirements of any CB radio, new or old. Aside from the hi-performance loading coil that maximizes the transmit/receive functions of your CB, these top-loaded antennas will also receive the NOAA emergency weather alert and national weather broadcasts for radios with those features. The "KW" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced shaft. Each is wound with heavy insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas. The 3/8"-24 threaded base has a tapered contact point that works especially well with Firestik mounts and accessories. The tapered "lug-nut" effect transfers stress away from the threads and reduces the possibility of vibration induced loosening of the antenna in its mount. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. For peak performance we recommend that you use one of our 18-foot Fire-Flex coaxial cables with these antennas #DASTS-8X18. All "KW" series antennas are factory bench tested for resonant frequency and overall quality. Don't forget ... ALL antennas, regardless of style or manufacturer, MUST be tuned after installation on the vehicle. Transmitting antennas are not "plug-n-play" devices. 5 Year Limited Warranty
|
The most popular wire-wound CB antenna in the world. This is the original Firestik design, and a proven performer since 1975. The "KW" antennas are compatible with autos, trucks, vans, motorcycles and ATV's in a single antenna configuration when metallic ground plane is available. Or, they may be used in dual (co-phased) configuration on any vehicle made from any type of material. Like all CB antennas, the "KW" antennas require fine-tuning (SWR) in their final mounting location. The loading coil on all "KW" antennas is easily accessible for precise SWR adjustments. All "KW" antennas exceed the requirements of any CB radio, new or old. Aside from the hi-performance loading coil that maximizes the transmit/receive functions of your CB, these top-loaded antennas will also receive the NOAA emergency weather alert and national weather broadcasts for radios with those features. The "KW" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced shaft. Each is wound with heavy insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas. The 3/8"-24 threaded base has a tapered contact point that works especially well with Firestik mounts and accessories. The tapered "lug-nut" effect transfers stress away from the threads and reduces the possibility of vibration induced loosening of the antenna in its mount. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. For peak performance we recommend that you use one of our 18-foot Fire-Flex coaxial cables with these antennas #DASTS-8X18. All "KW" series antennas are factory bench tested for resonant frequency and overall quality. Don't forget ... ALL antennas, regardless of style or manufacturer, MUST be tuned after installation on the vehicle. Transmitting antennas are not "plug-n-play" devices. 5 Year Limited Warranty
|
The Rugged Ridge Reflex Antenna implements a shorter antenna design and a flexible material in its construction, making it a practical antenna solution for any Jeep TJ or JK (adapters included). Lower antenna height significantly reduces the risk of the antenna being struck by tree limbs, trail hazards and even those damaging automated car washes. The Reflex Antenna is so resilient that it just bends over to release anything that may become hung on it and then returns to an upright position. Fitted with the proper threaded adapter for the application makes the Reflex Antenna a breeze to install. Available in multiple sizes- 6, 9, 13, 15 and 21-inch lengths.
|
UNIVERSAL S/RF/SWR METER FOR CB & 10 METER RADIOS
|
28' SSB,TWO-PIECE W/MAST MOUNT
|
RECON Truck Accessories is a manufacturer of Premium Quality Aftermarket Vehicular & Powersports Lighting Accessories. We specialize in LED (Light Emitting Diode) technology & XENON & HID (High Intensity Discharge) Lighting.
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |