Fulton Bolt Thru Swivel Jacks feature swing-away design, with bolt thru mounting. Heavy duty steel construction with a zinc finish for corrosion resistance. 10" of travel with 6" poly wheel.
|
Increase your support surface area and make the original power tool even more versatile. Use the Hi-Lift Off-Road Base to alleviate jack sinkage on soft ground.
|
3,000 lb capacity. Used with Hi-Lift Jack for bumpers that are slotted or have a curved surface. Manufactured of high-quality steel. Makes raising one wheel of average vehicle easy. Designed to be used with Hi-Lift Jacks only.
When used with the Hi-Lift Jack, which is not itself designed to be used on curved bumpers, the Bumper Lift makes raising one wheel of most average sized vehicles up to 2 (5 cm) above the ground an easy task.
Never attempt to lift more than one wheel at a time.
|
The locking knob is a “must have” for any hood mount. Adjustable tube mount, 4XRAC, or LOC-RAC owner. The locking knob replaces an existing knob or wing nut provided on Hi-Lift® Jack mounting accessories. Once tightened, the locking knob can be locked with the provided key. Once locked, the locking knob spins freely and cannot be removed, securing the Hi-Lift® Jack in the mount. There are two size locking knobs available… one model (HM-LK) fits Hood Mounts only. The other model (VERS-LK) fits Adjustable Tube Mounts, 4XRAC's, and Loc-Rac's. The VERS-LK can also be used to secure and lock the Unique Winch-Clamp-Spreader Attachment that comes only with the Hi-Lift® X-TREME Jacks.
|
The mission of Hope for the Warriors is to enhance the quality of life for post-9/11 service members, their families, and families of the fallen who have sustained physical and psychological wounds in the line of duty. Hope for the Warriors is dedicated to restoring a sense of self, restoring the family unit and restoring hope for our service members and our military families. As an American company, Hi-Lift Jack Company wants to provide support for those service members that have served and made tremendous sacrifices for the freedoms we enjoy on a daily basis. Hi-Lift Jack Company will donate a portion of its proceeds for every Hi-Lift Patriot Jack sold to Hope for the Warriors.
|
Includes 8' strap, winch tensioner, custom nose attachment, gloves, hardware and carrying case.
|
The locking knob is a “must have” for any hood mount. Adjustable tube mount, 4XRAC, or LOC-RAC owner. The locking knob replaces an existing knob or wing nut provided on Hi-Lift® Jack mounting accessories. Once tightened, the locking knob can be locked with the provided key. Once locked, the locking knob spins freely and cannot be removed, securing the Hi-Lift® Jack in the mount. There are two size locking knobs available… one model (HM-LK) fits Hood Mounts only. The other model (VERS-LK) fits Adjustable Tube Mounts, 4XRAC's, and Loc-Rac's. The VERS-LK can also be used to secure and lock the Unique Winch-Clamp-Spreader Attachment that comes only with the Hi-Lift® X-TREME Jacks.
|
In recent years, many vehicle changes have been made in body styles, bumper styles, larger tires and/or lift kits added, making it harder to find a place to jack up your vehicle. The Lift-Mate is designed to provide a lifting point from most wheels (instead of the bumper) when used with a Hi-Lift®, the Lift-Mate makes raising one wheel of most average-sized vehicles a quick an easy lifting task.
|
New color is black and gunmetal gray with black wheels. All jacks are this color now. Kratos was designed from the ground up to stand out from the rest and perform flawlessly wherever needed. Based on a new 3 Ton chassis, this heavy duty jack has solid axles and large non-pneumatic wheels to give it a lift. No longer will you have to worry about dragging your jack through the sand or not being able to run over a zip tie or pebble in the garage. We worked hard to create the ultimate Off Road Jack that would hold up to the toughest off road conditions. Please note that this is not a bolt on wheel kit. This jack does not have standard wheels and can not be converted to a standard jack. It is built at our factory as a big wheel monster.
|
There’s little doubt that the traditional farm jack is a handy piece of equipment to have when you’re driving off road. You can use it to move your vehicle out of awkward situations, lifting vehicles to fill in voids beneath the tires or even as a bead breaker when you have to make a tire repair. But, as we all know, farm jacks can be dangerous. They’re inherently unstable and there are countless YouTube videos of users getting injured from a rogue handle or getting their hands caught between the handle and the body of the jack. With this problem in mind, ARB’s team of engineers was determined to come up with a better solution to the unsafe farm jack problem. The focus was to design a safer and easier mechanical jack while being lighter and more compact. Adding a new dimension to traditional techniques, the long-travel ARB JACK is backed by the unique power of hydraulic technology. Kicking into action when even the lightest force is applied to the handle, the hydraulics will smoothly jack the vehicle up at .5in increments with each downward maneuver. While in action, a black rubber body bumper shields the vehicle from risk of damage during the recovery. The easy-to-access red lowering lever ensures lowering the vehicle is achieved swiftly and safely thanks to the two-stage descent feature and safety stop. With the press of a lever, the user is able to adjust the lower speed between a slow or rapid descent.
|
Based on our 2 ton jack platform, we have added strong solid axles and large non-pneumatic wheels to give our jack a lift. No longer will you have to worry about dragging your jack through the sand or not being able to run over a zip tie or pebble in the garage. We worked hard to create the ultimate Off Road Jack that would hold up to the toughest off road racing conditions. Please note that this is not a bolt on wheel kit. This jack does not have standard wheels and cannot be converted to a standard jack. It is built at our factory as a big wheel monster.
|
13" Extension adjusts from 10" to 15." Recommended for long travel trucks and buggies on large tires. Extensions will NOT fit any other brand of jacks. If you are planning to use it on your current jack you will need to purchase the "floor jack lift pad" from us as well.
|
Designed to suit the ARB JACK or farm jacks, the ARB Jack Base provides off-roaders with a sturdy surface during recovery missions to limit slippage or sinking into soft ground when using a jack. Made from a heavy-duty, high density polyethylene construction and supporting up to 15,400lbs with a non-slip textured base, the ARB Jack Base can also be mounted on top of ARB TRED Pro boards using TRED mounting hardware.
|
The Black Bull 12 Volt Automatic Electric Car Jack is ideal to have on hand for emergency roadside tire changes. Don't get stuck on the side of the road changing a flat tire with a manual jack. This 2,000-pound capacity jack (that's 1 ton) is fully automatic, and is powered by your car's cigarette lighter. If you need to add air to your tires, just plug it into the cigarette lighter outlet of your car or truck and turn the power on. It is lightweight and doesn't weigh a ton, so it's super easy to transport in and out of the trunk of the car. Packaged inside a compact and sturdy plastic case, it weighs only 11 pounds total and stores safely and easily until you need it most. That's a convenience that teens, seniors, or folks with mobility impairments will appreciate. No need to work up a sweat jacking a car up by hand when the Black Bull Electric Car Jack will air up your tires quickly and effortlessly. With a lifting height of 5 to 14 inches, the Black Bull 12 Volt Automatic Electric Car Jack can lift most four-door and two-door cars, sedans or coups with standard wheels. This jack may not be appropriate for changing tires on a truck or SUV.
|
DC POWER JACK FOR BC72XLT
|
8" extension adjusts from 5" to 8." Recommended for most off road vehicles. Extensions will NOT fit any other brand of jacks. If you are planning to use it on your current jack you will need to purchase the "floor jack lift pad" from us as well.
|
These brackets mount to existing mount points on the hood’s hinges which means no drilling of any kind is required. These kits are easily installed in minutes and are the most complete of their kind. On top of the actual bracketry, these kits also include replacement mounting hardware in stainless steel, and a strong Velcro strap for securing your jacks handle to the body of the jack itself. Testing with our bracket kit with this strap proved to provide absolutely no rattling at all!
As an additional accessory, we’ve created a matching light bar. This light bar installs to the Hi-Lift bracket and allows you to mount 3 lights to the bar positioned in front of the Jack.
|
|
The Smittybilt trail jack mounts are universal brackets with roof rack adapter made of heavy-duty steel. They are designed to provide secure mounting for your trail jack while you're on the go. Brackets accept standard padlocks for added security.
|
Secure your Hi-Lift Jack to the side or rear of your Garvin Wilderness Rack. This Hi-Lift mount will work on all 4"H Garvin Wilderness Racks.
|
FLOOR JACK PAD 3.5 X 5.5
|
These mounts can be used to replace the bracket included with your Pro Eagle Off Road Jack if it becomes damaged. They can also be used on other brand jacks. Drilling holes into your off-brand jack will be required.
|
Support your sagging jack handle and get it back up where it belongs. Designed specifically to fithigh-liftstyle off-road type jacks, the Jack Strap secures the loose and noisy jack handle with indestructible HYPER-FLEX polyurethane. Unique "thru-hole" design allows a secure and flush fit mounting on most vehicle bumpers, beds and rails. It stays on the jack all the time because the design allows the handle to complete its ratcheting cycle. Other designs do not- and have to be taken off to allows the jack to move upward. No more embarrassing rattling parts on your ultimate off-road ride. The perfect solution to a persistent problem!
|
12' RG58AU COAX W/ MOLDED PL259S
|
RECOVERY POINT 8T ARB
|
|
|
Pioneer Hi-Lift Jack Bracket; For Use w/Pioneer Tray/Platform Accessories;
|
Pioneer High Lifting Jack And Shovel Holder Bracket; Attaches to Pioneer Platforms/Elevations/Trays;
|
REVERSING SWITCH CAM BAR
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |