The SRC Side Armor for the JK's utilize a one piece design and is manufactured from 1.75" .120 wall tubing. Each SRC Side Armor utilizes a dual girder system provides the ultimate protection for the sides and under section of your Wrangler. SRC Side Armor can be utilize as protection as well as a step at the same time. Every SRC Side Armor bolts up to your vehicle without any drilling or modifications, giving you the ultimate protection from wheel to wheel. All SRC Side Armors come finished in our signature series Matte Black Textured Powder Coat.

Rocker Panel Guard; Driver Side;

Rocker Panel Guard Set; Driver Side;

Manufactured from 3/16" solid plate and designed to form to the vehicle and protect your ride from the elements. Features a 1.75" over rider tube that provides extra protection. Finished in a Two Stage Matte Black Powder Coat. 5 Year Limited Warranty. Drilling is required in this application.

HARDWARE KIT

Jeep JKs, are extremely vulnerable to rocker armor damage on the trail. Poison Spyder Brawler Rockers provide the ultimate rocker armor protection while actually enhancing your Jeeps off-road capability—not to mention they look bad-ass! Brawler Rockers are two-piece "mini-boatside" style rocker armor. Each component is fabricated entirely of CNC-laser cut, precision brake-formed 3/16" plate steel. The upper piece fits the lower section of your Jeeps exterior sheet metal like a glove, conforming to the subtle curvature of the JK and providing protection similar to Poison Spyders JK Body Armor. The lower piece incorporates an extremely strong rub rail that protrudes about 3-1/4" outboard of the Jeeps body tub. The top surface of the rub rail may also serve as an entry step. Below, the brake-formed 3/16" plate steel angles down and inward to form a high clearance boatside for sliding off of rocks and obstacles. Inside, an array of beefy 3/16" thick internal gussets provide ultimate strength to the Brawler Rocker. Oval lightning holes along the length of the boatside section provide great Poison Spyder looks while allowing access to hose out mud and debris after a day on the trail. The ends of the Brawler Rockers are capped in the same 3/16" plate steel, in angled facets that allow up to a 40" tire and visually integrate with the lines of Poison Spyder front and rear JK Crusher Flares. The upper piece attaches to the body tube using supplied stainless steel flat-head cap screws and nut-serts. The lower piece attaches to the upper piece also with stainless steel flat-head cap screws and easy-to-install clip-nuts. All fastener holes are countersunk for a flat surface using the flat-head hardware. Underneath, the lower piece attaches at the Jeeps body mounts. Attaching the Brawler Rockers in this way, along several different planes, provides triangulated strength to the entire assembly. The body-mount tie-ins ensure that they are securely integrated to the strongest structural component of the Jeep—the frame—while also allowing the Brawler Rocker to hug the body tub as closely as possible. Please note that Brawler Rockers are NOT compatible with body lifts. Brawler Rockers are designed to handle a serious beating! They not only provide unmatched rocker protection, but they also provide a super strong pivot point which can help you to maneuver through tight obstacles. The boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail. The protruding rub rail keeps vertical obstructions such as trees and rock walls a safe distance from the Jeeps doors and other vulnerable body parts. And when you need to change a tire or perform an extraction, the Brawler Rocker provides a strong, convenient lifting point for your Hi-Lift jack. BLACK POWDER COAT Fits 2007 to 2016 JK Wrangler Unlimited and Rubicon Unlimited;4-door models;Black powder coat;Two-piece "mini-boatside" style rocker armor;3/16" plate steel;All fastener holes are countersunk;Boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail;Angled facets that allow up to a 40" tire

The ultimate vehicle protection! Constructed of heavy duty 2 E-Coated powder coat steel tube, these tough Side Armor / Rocker Guard units are built to take on the roughest terrain! With two hot styles to choose from, you can customize your Jeep to fit your needs!

The most vulnerable areas on the body of the Jeep JK are the rocker panels. Poison Spyder Rocker Knockers protect your JK's rocker panel area while enabling you to slide over rocks and obstacles. Rocker Knockers enhance your Jeep's trail performance while adding rugged off-road looks to your JK. Poison Spyder JK Rocker Knockers are engineered for brute strength and impact resistance by attaching to the Jeep's body in 14 strategic bolt locations. The mounting plate is CNC laser cut from 3/16" plate steel and precision brake-formed for a perfect fit. The tubular rocker rail is rugged 1.75" X .120 wall DOM structural tubing. The slider rail is fabricated from CNC-bent 1.5" X .120 wall DOM tubing. The space between the Slider and the main tube of the Rocker Knocker is filled with a CNC laser-cut Slider Skid. The Skid features Poison Spyder's exclusive oval dimples for structural strength as well as great Poison Spyder looks. The Skid attaches with countersunk stainless steel flat head cap screws for a flush surface. The Slider and Skid mount at an angle to the main tube of the Rocker Knocker to provide boatside-like protection from the rocks while keeping the Jeep's doors and body a safe distance from higher level trail hazards. Another quality element of the Poison Spyder Rocker Knocker is the ability to remove the outer slider skid. The outer skid is built from 1/8" steel and is secured to a 3/16" base plate welded into the slider hoop assembly. The Slider does not rely on the skid for structure. The advantage of having the ability to remove the skid, is to allow you to replace it if it becomes damaged to a level that it has lost its aesthetic appearance or functionality. Also you will be able to customize the Sliders to match your Jeep, and to easily be able to remove it for re-finish. Poison Spyder JK Rocker Knockers are compatible with all known suspensions and body lifts, including long arm kits. Because the Rocker Knockers mount directly to the Jeep's body tub, they will lift with the body when a body lift is installed (competitors' frame-mounted rocker guards may leave a gap on body-lifted vehicles). As an added attribute the Rocker Knocker mounting plate is designed with drain reliefs to discourage debris from collecting in the lower body cavity. Poison Spyder JK Rocker Knockers can be utilized as a stand alone component or can be used in conjunction with Poison Spyder's JK Body Armor. JK Body Armor is a secondary line of defense against off road damage to your Jeep, protecting the Jeep by reaching above the Slider level up to the door line. Rocker Knockers do not mount or use the Body Armor for additional structure.

Jeep JK's, are extremely vulnerable to rocker armor damage on the trail. Poison Spyder Brawler Rockers provide the ultimate rocker armor protection while actually enhancing your Jeep's off-road capability—not to mention they look bad-ass! Brawler Rockers are two-piece "mini-boatside" style rocker armor. Each component is fabricated entirely of CNC-laser cut, precision brake-formed 3/16" plate steel. The upper piece fits the lower section of your Jeep's exterior sheet metal like a glove, conforming to the subtle curvature of the JK and providing protection similar to Poison Spyder's JK Body Armor. The lower piece incorporates an extremely strong rub rail that protrudes about 3-1/4" outboard of the Jeep's body tub. The top surface of the rub rail may also serve as an entry step. Below, the brake-formed 3/16" plate steel angles down and inward to form a high clearance boatside for sliding off of rocks and obstacles. Inside, an array of beefy 3/16" thick internal gussets provide ultimate strength to the Brawler Rocker. Oval lightning holes along the length of the boatside section provide great Poison Spyder looks while allowing access to hose out mud and debris after a day on the trail. The ends of the Brawler Rockers are capped in the same 3/16" plate steel, in angled facets that allow up to a 40" tire and visually integrate with the lines of Poison Spyder front and rear JK Crusher Flares. The upper piece attaches to the body tube using supplied stainless steel flat-head cap screws and nut-serts. The lower piece attaches to the upper piece also with stainless steel flat-head cap screws and easy-to-install clip-nuts. All fastener holes are countersunk for a flat surface using the flat-head hardware. Underneath, the lower piece attaches at the Jeep's body mounts. Attaching the Brawler Rockers in this way, along several different planes, provides triangulated strength to the entire assembly. The body-mount tie-ins ensure that they are securely integrated to the strongest structural component of the Jeep—the frame—while also allowing the Brawler Rocker to hug the body tub as closely as possible. Please note that Brawler Rockers are NOT compatible with body lifts. Brawler Rockers are designed to handle a serious beating! They not only provide unmatched rocker protection, but they also provide a super strong pivot point which can help you to maneuver through tight obstacles. The boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail. The protruding rub rail keeps vertical obstructions such as trees and rock walls a safe distance from the Jeep's doors and other vulnerable body parts. And when you need to change a tire or perform an extraction, the Brawler Rocker provides a strong, convenient lifting point for your Hi-Lift jack.

Our gusset kits include plates for the frame and triangle corner gussets. Plate welds to frame and rock slider welds to plate. Kits are made from 3/16" plate steel. 58" and 67" kits contain 6 plates and 6 gussets. 78" kit includes 8 plates and 8 gussets.

Avoid scratches and dings to your vehicle's paint caused by rocks and flying debris by installing these new side panel guards. These premium Lund™ guards, made from durable Rhino® lined polyurethane, are custom designed for each vehicle, so your vehicle's rocker panels and lower doors will not only be protected, but they will look great for the long haul.

• Made from a Rhino® lined polyurethane material with an adhesive backing
• Comes in pre?cut kits custom-designed for your truck or SUV
• Made in the USA
• Backed by a Limited Lifetime Warranty

This part is guaranteed to fit:

• 2009-2016 DODGE RAM 1500 5.5' BED;CREW CAB PICKUP

Avoid scratches and dings to your vehicle's paint caused by rocks and flying debris by installing these new side panel guards. These premium Lund™ guards, made from durable Rhino® lined polyurethane, are custom designed for each vehicle, so your vehicle's rocker panels and lower doors will not only be protected, but they will look great for the long haul.

• Made from a Rhino® lined polyurethane material with an adhesive backing
• Comes in pre?cut kits custom-designed for your truck or SUV
• Made in the USA
• Backed by a Limited Lifetime Warranty

This part is guaranteed to fit:

• 2014-2016 GMC SIERRA 1500 5.5' BED;CREW CAB PICKUP
• 2014-2016 GMC SIERRA 2500 5.5' BED;CREW CAB PICKUP
• 2014-2016 GMC SIERRA 3500 5.5' BED;CREW CAB PICKUP

Avoid scratches and dings to your vehicle's paint caused by rocks and flying debris by installing these new side panel guards. These premium Lund™ guards, made from durable Rhino® lined polyurethane, are custom designed for each vehicle, so your vehicle's rocker panels and lower doors will not only be protected, but they will look great for the long haul.

• Made from a Rhino® lined polyurethane material with an adhesive backing
• Comes in pre?cut kits custom-designed for your truck or SUV
• Made in the USA
• Backed by a Limited Lifetime Warranty

This part is guaranteed to fit:

• 2014-2016 CHEVROLET SILVERADO 1500 5.5' BED;CREW CAB PICKUP
• 2014-2016 CHEVROLET SILVERADO 2500 5.5' BED;CREW CAB PICKUP
• 2014-2016 CHEVROLET SILVERADO 3500 5.5' BED;CREW CAB PICKUP

The ultimate vehicle protection! Constructed of heavy duty 2 E-Coated powder coat steel tube, these tough Side Armor / Rocker Guard units are built to take on the roughest terrain! With two hot styles to choose from, you can customize your Jeep to fit your needs!

With a history of off-roading in its pedigree RSE has been tested in Utah’s back country from the beginning of it’s inception. Growing from a single bumper, RSE now is the leader in off-road products functionality and quality. Today’s RSE is driven by perfection. We pay meticulous attention to every last detail in our product line. Each RSE innovation is aimed at making your off-road experience better to any other.

Precision cut rubber Rocker Liners fit between the Jeep body and the Poison Spyder Rocker Knockers or Ricochet Rockers to protect the paint and provide a squeak-free, vibration-free installation. Includes two (2) liners, enough for both sides of the Jeep. Fits 2004 to 2006 LJ Wrangler Unlimited and Rubicon Unlimited;Includes two liners

Rock sliders are a great way of protecting the rocker panels of your Toyota. Trail-Gear has designed it’s Rock Sliders to be the strongest on the market, starting with 1 3/4" OD x .120 wall 1035 DOM. Trail-Gear Rock Sliders are the only rock sliders on the market that use 1035 DOM tubing, based on our testing we believe that using DOM tubing in this application makes our rock sliders the strongest, most affordable available today. Other companies try and cut manufacturing costs by using less expensive HREW tubing, but the end result is always the same, under extreme stress the HREW tubing splits down the seam, failing. Trail-Gear’s heavy duty design can take a pounding from the rocks while keeping body damage to a minimum, allowing you to slide over or between rocks on even the hardest trails without damage. Trail-Gear rock sliders are strong enough to hold the entire weight of the truck, a high-lift jack can be used anywhere along the slider for repositioning the rig on the trail, or simply high-lifting it up for repairs. The mounting legs are not welded onto the slider, but are shipped loose so that legs can be attached in different mounting positions. Mounting legs are pre-notched on one side and can be trimmed if needed on the opposite side. Mounting legs are 11 1/4" long, so they allow the sliders to stick out far enough to be used as a step if desired. Six mounting legs, three per side, are provided with the 58" and the 67" sliders, and eight mounting legs, four per side are provided with our 78" sliders. Trail-Gear rock sliders are sold in pairs, and are shipped raw with no finish, lightly oiled to prevent rusting.

Body Armor Cladding protects the body and adds tough off road looks to your TJ Wrangler. Made of 100% UV resistant diamond textured black plastic with easy NO Drill installation using 3M adhesive tape. Available in Matte Black, or can be painted to match vehicle. This is JUST the Side Rocker Panels. Fits 1997 to 2006 TJ Wrangler and Rubicon Diamond textured black plastic 100% UV resistant No drilling required

The ultimate in body side protection, Smittybilts Body Cladding is manufactured from 1/8" cold rolled steel and is engineered to fit and follow body contour to exacting specifications. The body cladding will work with O.E. and aftermarket flares to give lower quarter panel protection. 304 Marine grade stainless steel button head hardware included. Two stage textured matte black powder coat finish comes with a 5 Year Limited Finish Warranty. Body Cladding comes with Smittybilts Advantage Limited Lifetime Warranty. JK 4DOOR Fits 2007 to 2016 Wrangler Unlimited and Rubicon Unlimited;4-door models;Manufactured from 1/8” cold rolled steel;Engineered to fit and follow body contour to exacting specifications;Complete lower quarter panel protection when use with XRC Rock Sliders;Engineered to work with O.E. and aftermarket flares as well as the XRC body armor;304 marine grade stainless steel button head hardware;Two Stage Textured Matte Black Finish Powder Coat Finish - 5 year Limited Warranty

The ultimate vehicle protection! Constructed of heavy duty 2 E-Coated powder coat steel tube, these tough Side Armor / Rocker Guard units are built to take on the roughest terrain! With two hot styles to choose from, you can customize your Jeep to fit your needs!

Due to popular demand, Poison Spyder Brawler Rockers for JK are now available in light-weight aluminum. Features and construction are exactly identical to our Heavy Duty STEEL Brawler Rockers, the only exception being that these are fabricated from 3/16" thick aluminum plate rather than 3/16" steel. Aluminum would be preferred by those who want the bad-ass looks, entry step functionality, and an admittedly reduced measure of rocker armor protection, but with a very significant weight savings compared to the steel versions. For those who will be testing their Jeeps on tougher trails where frequent contact with the rocks is to be expected, we highly recommend opting for the steel versions. While the aluminum is a respectable 3/16" thick, it should not be expected to withstand the same amount of punishment that our steel Brawler Rockers can handle. Brawler Rockers are two-piece "mini-boatside" style rocker armor. Each component is fabricated entirely of CNC-laser cut, precision brake-formed 3/16" plate. The upper piece fits the lower section of your Jeep's exterior sheet metal like a glove, conforming to the subtle curvature of the JK and providing protection similar to Poison Spyder's JK Body Armor. The lower piece incorporates a rub rail/step that protrudes about 3¼" outboard of the Jeep's body tub. The top surface of the rub rail may also serve as an entry step. Below, the brake-formed 3/16" plate material angles down and inward to form a high clearance boatside. Inside, an array of beefy 3/16" thick internal gussets provide extra strength to the Brawler Rocker. Oval lightning holes along the length of the boatside section provide great Poison Spyder looks while allowing access to hose out mud and debris after a day on the trail. The ends of the Brawler Rockers are capped in the same 3/16" plate material, in angled facets that allow up to a 40" tire and visually integrate with the lines of Poison Spyder front and rear JK Crusher Flares. The upper piece attaches to the body tube using supplied stainless steel flat-head cap screws and nut-serts. The lower piece attaches to the upper piece also with stainless steel flat-head cap screws and easy-to-install clip-nuts. All fastener holes are countersunk for a flat surface using the flat-head hardware. Underneath, the lower piece attaches at the Jeep's body mounts. Attaching the Brawler Rockers in this way, along several different planes, provides triangulated strength to the entire assembly. The body-mount tie-ins ensure that they are securely integrated to the strongest structural component of the Jeep—the frame—while also allowing the Brawler Rocker to hug the body tub as closely as possible. Please note that Brawler Rockers are NOT compatible with body lifts. Brawler Rockers ship bare, allowing you to paint or powdercoat in the color of your choice. Note that if you have previously installed Poison Spyder's JK Body Armor, you will be able to re-use the existing nut-serts, saving a significant amount of installation time (Body Armor will have to be removed). Fits 2007 to 2016 Wrangler and Rubicon;2-door models;Aluminum;Two-piece "mini-boatside" style rocker armor;3/16" thick aluminum plate;All fastener holes are countersunk;Boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail;Angled facets that allow up to a 40" tire

The N-FAB Rock Rails with optional Detachable Step (SOLD SEPARATELY) provide superior protection while enhancing the looks of your Jeep. Constructed from 1-3/4" .120 wall heavy duty tubular steel, the N-FAB Rock Rails feature a distinctive, fully-welded, double tube design that provides optimum strength and protection for your Jeep. Also available are the Detachable Steps (SOLD SEPARATELY) which are designed to be added to the N-FAB Rock Rail to improve access to your Jeep. These steps are sold in pairs and are a simple bolt on design.

Trail-Gear now offers fully welded Rock Slider kits for Tacoma Extra-cab Pickups. Made from 1 3/4" X .120" wall DOM tubing. Kit includes 4 legs with gussets on each slider for easy, bolt-on installation. We recommend welding bars directly to the frame. Sliders are shipped raw and ready to customize with the surface treatment of your choice. Sliders for 1995-2004 applications will fit Tacoma Extra Cab, Double Cab and Prerunner models.

RRC ROCKER GUARDS

The ultimate vehicle protection! Constructed of heavy duty 2 E-Coated powder coat steel tube, these tough Side Armor / Rocker Guard units are built to take on the roughest terrain! With two hot styles to choose from, you can customize your Jeep to fit your needs!

Your Jeep Wrangler is made for getting off the beaten path. So make it stand out from the crowd, with custom-built Trail Armor(R) from Bushwacker. Trail Armor(R) combines trail-proven toughness with state-of-the-art Dura-Flex(R) 2000 TPO material for a look all its own. Dura-Flex(R) 2000 TPO is our proprietary automotive protective material, ruggedized for extra durability and flexibility. Unlike steel, it can't rust. And, unlike lesser products, it's 100% UV protected to prevent chalking. We make everything right here in the USA, designing to the tightest tolerances for a factory-like fit. Yet, you install Trail Armor(R) in minutes with automotive-grade 3M (TM) adhesive, no drilling needed. Like all Bushwacker products, Trail Armor(R) is backed by our Limited Lifetime Warranty. Your Trail Armor(R) starts out looking tough, and lives up to its looks year after year. Fits 2007 to 2014 JK Wrangler and Rubicon 2-door models Paintable matte black finish 140% UV resistant No drilling required

Our gusset kits include plates for the frame and triangle corner gussets. Plate welds to frame and rock slider welds to plate. Kits are made from 3/16" plate steel. 58" and 67" kits contain 6 plates and 6 gussets. 78" kit includes 8 plates and 8 gussets.

Poison Spyder Rocker Knockers are the ultimate protection for your Jeep's vulnerable rocker panel area. As the trails get tougher and recreational off-roading gets more and more hardcore, vehicle body damage becomes more prevalent. And rocker panels are most vulnerable, taking hits from both underneath and the sides as you work your way through tight obstacles. Poison Spyder Rocker Knockers protect your rocker panels by cladding them in rugged, high strength 3/16" plate steel armor. Rocker Knockers are manufactured to hug the lines of your Jeep's rocker panels perfectly, forming a glove-fit with virtually no loss of valuable ground clearance. Specifically engineered for most Jeep CJ, YJ, TJ and LJ models, Rocker Knockers are CNC laser cut from high strength 3/16" plate steel, and precision brake-formed for a perfect fit. Bolt holes are countersunk for the included stainless steel flat head hardware, which yields a flat, unobstructed surface to slide over obstacles. All mounting hardware is included as well as detailed installation instructions. Poison Spyder Rocker Knockers bolt to your Jeep's body in key areas, and interface with strengthened areas of the underside of the tub such as body mounts, strengthening ribs, etc. Because they mount to the body itself, there is no resulting gap or misalignment when a body lift is installed. For installations in which you would like to protect the paint underneath the Rocker Knocker, as well as provide a measure of vibration absorption, we offer Rubber Rocker Liners, precisely cut to fit between the Rocker Knocker and the Jeep's body. Be sure to order these separately, as they're not included in the standard Rocker Knocker package.

Key Parts offers complete vehicle coverage for rust and collision panels. These panels are designed to replicate exact OEM fitment and offer increased coverage areas vs. the competitors. Painted parts are shipped in advanced black EDP coating, where chrome parts are triple nickel chromed to the highest quality. Think Key Parts for your fender, floor pan, rust repair, and all body panel needs!

Trail-Gear now offers fully welded Rock Slider kits for Tacoma Extra-cab Pickups. Made from 1 3/4" X .120" wall DOM tubing. Kit includes 4 legs with gussets on each slider for easy. We recommend welding bars directly to the frame. Sliders are shipped raw and ready to customize with the surface treatment of your choice. Sliders for 2005-2007 applications will fit Tacoma Extra Cab and Double Cab models. This application will not fit Access Cab models.

Rock sliders are a great way of protecting the rocker panels of your Toyota. Trail-Gear has designed it?s Rock Sliders to be the strongest on the market, starting with 1 3/4"" OD x .120 wall 1035 DOM. Trail-Gear Rock Sliders are the only rock sliders on the market that use 1035 DOM tubing, based on our testing we believe that using DOM tubing in this application makes our rock sliders the strongest, most affordable available today. Other companies try and cut manufacturing costs by using less expensive HREW tubing, but the end result is always the same, under extreme stress the HREW tubing splits down the seam, failing. Trail-Gear?s heavy duty design can take a pounding from the rocks while keeping body damage to a minimum, allowing you to slide over or between rocks on even the hardest trails without damage. Trail-Gear rock sliders are strong enough to hold the entire weight of the truck, a high-lift jack can be used anywhere along the slider for repositioning the rig on the trail, or simply high-lifting it up for repairs. The mounting legs are not welded onto the slider, but are shipped loose so that legs can be attached in different mounting positions. Mounting legs are pre-notched on one side and can be trimmed if needed on the opposite side. Mounting legs are 11 1/4"" long, so they allow the sliders to stick out far enough to be used as a step if desired. Six mounting legs, three per side, are provided with the 58"" and the 67"" sliders, and eight mounting legs, four per side are provided with our 78"" sliders. Trail-Gear rock sliders are sold in pairs, and are shipped raw with no finish, lightly oiled to prevent rusting.