The HitchLink, manufactured from solid 6061-T6 aluminum, turns your tow hitch into a convenient and strong D-ring mount. * * NOTE: Never exceed factory receiver hitch pull rating. Always use a quality steel alloy 5/8" hitch pin. Always pull in line with the hitch, do not bind or side load the shackle.
Red
Precision CNC machined 6000 series aluminum
Weighs only 1/3 of conventional steel designs
Rated at 9500 pounds
Ultimate failure at 51,000 pounds
Fits standard 2 inch receivers
Fits standard 3/4 inch screw pin shackles
Anodized and powder coated for oxidation protection
Made in USA
|
The HitchLink, manufactured from solid 6061-T6 aluminum, turns your tow hitch into a convenient and strong D-ring mount. * * NOTE: Never exceed factory receiver hitch pull rating. Always use a quality steel alloy 5/8” hitch pin. Always pull in line with the hitch, do not bind or side load the shackle.
|
|
The Cargo Divider Bar easily fits onto the Cargo Stabilizer Bar (bar not included) with 2 set screws (included). Now your cargo will not slide from one side to the other with the Cargo Divider Bar in place.
|
Keep your Synthetic Winch Rope safe with this Factor 55 Aluminum Hawse Fairlead. Some of the images used show both the 1" and 1.5" thick fairlead, these images are used to show fairlead detail. You will only receive one fairlead when ordered.
|
|
|
|
|
Weatherproof, adapts a 4-wire flat to both a 4-wire flat and a 7 RV blade. Impact and corrosion resistant, includes dust cover, mounting bracket and hardware. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Oversized hinge for maximum durability. Reinforced easy-grip lid opens 180 degrees for easier connections. Best corrosion resistance. Internal seals for ultimate weatherproofing. Includes powder coated mounting bracket, hex-head zinc plated screws and har dware, and grease packets. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
|
|
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry’s first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets. Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment. The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips. The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. MADE IN THE USA, the FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.
|
|
|
Our heavy duty Pintle mounts are available in different styles and drops to help you mount a Pintle hook on your vehicle.
|
|
|
Drawtite receiver hitches are built using all welded construction for maximum strength and built to fit your specific vehicle no adapters used for the strongest and safest receiver hitches available. All Drawtite hitches are backed by a nation wide lifetime warranty for piece of mind.
|
Drawtite receiver hitches are built using all welded construction for maximum strength and built to fit your specific vehicle no adapters used for the strongest and safest receiver hitches available. All Drawtite hitches are backed by a nation wide lifetime warranty for piece of mind.
Class III/IV
Round Tube Max-Frame
Trailer Hitch
Rear
2 in. Rec.
6000lbs. GTW/10500lb Wt. Dist
600lbs. Tongue Wt/1050lb Wt. Dist.
Install Req. OEM Bumper And Brackets
|
|
|
|
|
Ideal for winching and recovery use with a Hi-Lift Jack. Polyester material for a controlled pull and to reduce dangerous recoil. Designed for slower, more exact extraction requirements. Reflective loops make night recovery easier. With minimal light, the loops reflect and “shine” making it easier to see both connecting points during the night recovery process.
|
Wiring T-One Connector. Circuit Protected ModuLite Module. 3 Wire System. Amp Rating 2.1. Features: Quick And Easy Installation. Solid Weatherproof One Piece Construction. No Splicing Of Vehicle Wires. No Special Tools Required. 1 Year Limited Warranty. Tow Ready is brought to you by the manufacturer of Draw-Tite, Hidden Hitch and Reese Towing products, the leader in the industry. With a heritage of more than 65 years, these brands are recognized worldwide as "Best-in-Class".Tekonsha 118449 T-One Connector Assembly Fits 08-16 Highlander
|
|
|
|
|
Copyright © 1999-2022 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |