TUBE THIMBLES 5/16IN
|
The new Smittybilt XRC winches have been thoroughly updated with heavy-duty features for enhanced performance and durability. Ranging from 9,500lb to 17,500 lbs capacities, Smittybilt's XRC Series winches can handle any situation you can get into. Every XRC winch features a Series Wound 6.6 HP motor and a 3-Stage Planetary Gear System with revised gear ratios for increased pulling power and lightning-fast line speeds. Every winch is finished in a rugged UV-Resistant matte black coating with stainless steel hardware and oversized aluminum crossbars to provide you with a great looking system that will last you a lifetime. Every XRC winch includes a heavy duty winch controller, four-way roller fairlead, forged steel tow hook, and a redesigned solenoid box that can be mounted in 3 different positions for maximum versatility. If you're looking for a winch equipped with a synthetic winch rope, look to the XRC Comp Series for the ultimate in pulling power and performance. A Smittybilt XRC winch is a complete recovery system with the muscle and reliability to bail you out of any situation.
|
12 v H/D Power ATV winch, 2,000 lbs
Specification: • Max load: 2000 lbs. stall rating and low amp draw • Wire rope: 5/32-in. x 49 ft. • Motor: 12V • Winch: 0.85 HP • Gear ratio: 153:1 Features include: • Tension plate • Free spool clutch • Length: 12.5" x Width: 9.75" x Height: 6.5" • Weight: 14 lbs |
Protect your winch investment from the elements and show your Smittybilt pride with this XRC8 & XRC10 logo winch cover from Smittybilt
Fits 8000 lb to 12000 lb winch
Black canvas
Dimensions: 6 inches wide x 10 inches tall x 22 inches long
|
The multi-purpose snatch block will double the pulling power of any winch and can change your pulling direction without damaging the wire rope. Us of the snatch block will also help in reducing heat build up and amperage draw.
|
REMOTE SOCKET AND PLUG
|
CARBON FRAME & BRUSH ASSY
|
CONTROL BOX MOUNT BRACKET
|
GEAR BOX END COVER
|
Rapid mount portable and marine operation with handheld remote control on a 10 foot lead. Built-in carry handle for easy transportation. Low amperage-draw gear box. Pull line rating of 6,000 pounds rolling load and 2,000 pounds rated line pull.
Cap Lb=6,000
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
The Smittybilt X2O Winches have been enhanced in almost every area for increased performance and trouble free operation. Every X2O winch features a Series Wound 6.6 HP motor that is completely sealed, as well as a 3-Stage Planetary Gear System. The X2O winch features a completely waterproof 500 AMP solenoid pack that can be mounted in 2 different locations, depending on your application needs. They also include a new controller that can be wired to the winch or unplugged for trouble-free wireless operation. The X2O also features optimized gear ratios that deliver lightning-fast line speeds. And finally, all X2O winches are covered by the Smittybilt Lifetime Warranty, providing peace of mind as well as unparalleled performance. With all of these features, you can count on the X2O winch to be there every time, in every situation.
|
Winch Control Box Cover; For XRC-9.5K GEN2 Winch PN[97495];
|
This red winch cable stopper from Rugged Ridge prevents painful hand injuries by stopping the hook from being pulled through the fairlead.
Red
For use with steel cable or synthetic rope
Fits most off road/UTV winches
|
This powerful 2,000LB winch comes standard with more features and accessories than most winches in its class. A 1.0 horse power motor with a 3 stage planetray gear system with a 153:01 gear ratio delivers fast line speed with or without load. Internal contactor built into winch.
Rated Line Pull: = 2000 lbs
Voltage: = 12V
Motor: = 1.0 HP
Remote Control: = 11 ft. Lead
Gear Ratio: = 153:1
Size: = 11.25 in. x 4 in. x 4.1 in.
Weight: = 12 lbs.
Wire Rope: = 49 ft. of 5/32
Fairlead: = Roller
Winch Type: = Electric
|
Cable Limiter; keeps two wraps of cable on the ratchet wheel. Releases load one notch at a time. Dual Ratchet Drive; notch at a time. Laminated steel ratchet wheel; Operates in any position. Plated steel for rust resistance. Drop forged safety hooks. Meet
s OSHA Specs. Meets ASME Spec B30.21-1999.
Leverage 42:1
Cable In.=5/16Lift Ft.=6
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
WINCH MOUNTING HDW
|
The basic Hawse fairlead is designed to guide the rope or cable to and from the winch drum. Great for the occasional user and preferred by the users of synthetic rope.
|
Fairlead Mounting Hardware; For [PN97495];
|
HAND WINCH
5.5/one gear ratio
Stainless steel ratchet spring
Permanently lubricated bearings
Hardened drive gears
Zinc plated handle with corrugated poly grip
Two-way ratchet with off position
Rope/cable mounts through gear side plate
Reel cap.: 100' of 3/16" cable or 30', 3/8" rope
DL1100A 1100# CAP HAND WINCH
SIZE:1,100 Lb.
|
|
|
Galvanized steel 7 x 19 aircraft cable. Fitted with a heavy duty galvanized safety latch hook, pull-proof loop and a fastener end for replacement use on POWER WINCH, DL, SUPER WINCH and other quality power winches.
5,600 Lb. Break Strength - Carded
Dia In x Lgth Ft=7/32 x 50
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
The Smittybilt X2O Winches have been enhanced in almost every area for increased performance and trouble free operation. Every X2O winch features a Series Wound 6.6 HP motor that is completely sealed, as well as a 3-Stage Planetary Gear System. The X2O winch features a completely waterproof 500 AMP solenoid pack that can be mounted in 2 different locations, depending on your application needs. They also include a new controller that can be wired to the winch or unplugged for trouble-free wireless operation. The X2O also features optimized gear ratios that deliver lightning-fast line speeds. And finally, all X2O winches are covered by the Smittybilt Lifetime Warranty, providing peace of mind as well as unparalleled performance. With all of these features, you can count on the X2O winch to be there every time, in every situation.
|
The winch lock bolt is a custom 3/8-16 precision security bolt made from 1045 carbon alloy steel heat treated to Grade 5 yield strength. The key patterned head bolt is proprietary and the matching key is not available at your local retail hardware store. The winch lock bolt cannot be removed with ordinary screw drivers, pliers, or commonly sold security bits. Simply substitute one of your winch mounting bolts with the “Winch Lock” bolt and your winch is protected – simple! Fits all winches with standard 3/8 -16 mounting hardware.
|
The advantages of winching with a screw pin shackle over a conventional winch hook are many:
D-ring shackles are up to 5X stronger than conventional winch hooks Conventional hooks are too small to safely fit both ends of a recovery strap Recovery straps cannot slip out of a shackle like they can with hooks Hook safety latches are not rated for loads and can tear recovery straps Conventional hook surfaces add higher stresses to recovery strap fibers, resulting in decreased strap ratings Shackles can be quickly removed and stowed away until needed for winching. Hooks do not cinch neatly against fairleads and are prone to rattling and loosening Conventional winch hooks are designed for chains - not commonly used recovery straps Engineered, Tested, and Made in USA Stress analyzed using COSMOS FEA and destructively tested for confirmation Billet construction - precision machined from 6061-T6 Kaiser Aluminum round bar 16,000 pound max load rating Fits all steel cables and synthetic ropes up to 3/8"e; in diameter Fits eyes equipped with standard or tube thimbles to 3/8 inch diameters 1.2 inch shackle tab thickness virtually eliminates "e;shackle rattle"e; Massive 5/8 inch diameter carbon steel double shear pin Optional EPDM "e;Rubber Guard"e; protects alloy Hawse fairleads - rubber barb attachment Can be installed and removed in minutes - simple snap ring removal Cinches neatly against all types of fairleads - Hawse or Roller Red and Black colors are powder coated to resist fading while all other colors are beautifully anodized and zinc plated in the USA |
HANDLE BAR CONTROL
|
4,200 Lb. Break Strength - Carded
Dia In x Lgth Ft=3/16 x 25
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
HAND WINCH
5.5/one gear ratio
Stainless steel ratchet spring
Permanently lubricated bearings
Hardened drive gears
Zinc plated handle with corrugated poly grip
Two-way ratchet with off position
Rope/cable mounts through gear side plate
Reel cap.: 100' of 3/16" cable or 30', 3/8" rope
DL1402A 1400# CAP HAND WINCH
SIZE:1,400 Lb.
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |