This item can NOT be shipped to these states CA
BULLDOG(R) 8000 LB TOPWIND DIRECT WELD JACK Square tube direct weld jack Has topwind crank - 15" travel Drop leg with heavy-duty base provides - 13-1/2" of additional adjustment 190704 DIRECT WELD JACK SIZE:8,000 Lb. COLOR:Gray |
Although the Hi-Lift 4xRAC was designed with Jeep® owners in mind, it may be installed on any flat surface 2-1/2 wide or more. Drilling required. Kit includes: 2 mounting brackets, 2 mounting bracket caps, 2 wing nuts, 8 hex head cap screws, 8 nyloc nuts, 1 handle strap.
It may be installed on any flat surface 2-1/2" wide or more
Kit includes 2 mounting brackets, 2 mounting bracket caps, 2 wing nuts, 8 hex head cap screws, 8 nyloc nuts and 1 handle strap
|
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate.
Cast and steel jack
Black powder coat
Overall length: 44"
Max lift height: 32"
Weight: 27lbs.
|
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate. Cast and steel jack Black powder coat Overall length: 60" Max lift height: 48" Weight: 31lbs.
|
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate.
Cast and steel jack
Red powder coat
Overall length: 60"
Max lift height: 50"
Weight: 32lbs.
|
Designed for mounting a Hi-Lift® jack to round and square tube bumpers, bull bars, roll cages, and roof racks. Allows for easy and adjustable mounting on round tube from 1" up to 3" in diameter. The large set is designed for round tube from 2-3" in diameter that will work on most vehicle bull bars and roll cages. The small set is designed for round tube from 1-2" in diameter, which works on many roof racks, and also ATV/UTV bars, bumpers and roll cages.
Fits 2"-3" diameter bars
Manufactured of 6061-T6 structural aluminum
Stainless steel hardware
Securely stores your Hi-Lift® jack
|
|
HI-LIFT ALL-CAST JACK
The only all-cast jack manufactured - made -
of high yield & tensile strength iron castings
7,000 lb. tested capacity
Lifts, winches, clamps and more
Top winch-connector clamp
Powder-coated finish w/zinc plated hardware
Includes safe use and load rating information
2-piece handle & socket - proven, durable design
HL-485 48 IN. HI-LIFT JACK
SIZE:48"
COLOR:Red
|
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate.
Cast and steel jack
Red powder coat
Overall length: 46"
Max lift height: 34"
Weight: 28lbs.
|
For agriculture, automotive, offroad, hardware, industrial and DIY uses. Multi purpose, for lifting, winching and clamping. Low pick-up with lifting nose only 4-1/2'' from bottom of base plate. 4-1/2'' lifting nose for safe, positive contact with load. 28
square inch base plate for extra stability. Complete with adjustable top clamp clevis for use in clamping and winching. For speedy disengaging, lifting unit automatically drops away when load is removed. Safety bolt is designed to shear at 7,000 pounds.
Approximate weight 30 pounds.
Hght In=48
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Designed for mounting a Hi-Lift® jack to round and square tube bumpers, bull bars, roll cages, and roof racks. Allows for easy and adjustable mounting on round tube from 1" up to 3" in diameter. The large set is designed for round tube from 2-3" in diameter that will work on most vehicle bull bars and roll cages. The small set is designed for round tube from 1-2" in diameter, which works on many roof racks, and also ATV/UTV bars, bumpers and roll cages.
Fits 1"-2" diameter bars
Manufactured of 6061-T6 structural aluminum
Stainless steel hardware
Securely stores your Hi-Lift® jack
|
|
|
OTHL001 Hi lift neoprene cover Size 13 x 10 x 1 inches Feature:
|
Take the most versatile gear on the trail with you, the Trail Jack! The large base and adjustable connector clamp will quickly get you out of any situation. The Trail Jack is constructed of solid cast steel and finished in a durable power coated finish. All hardware is Zinc Plated and the Trail Jack is rated up to 7000 lbs!
|
This item can NOT be shipped to these states CA
BULLDOG(R) BRAND TOPWIND JACK 2,000 lb. capacity topwind A-frame jack Easy cranking - 10" travel Weld-on L-bend swivel bracket assembled Plunger pin and base included Dependable vertical & side load capacity Proven reliability for long term use - at rated loads - precision fitting parts 151401 2000LB TOPWIND JACK SIZE:2000 Lb. COLOR:Gray |
BULLDOG REMOVABLE TONGUE JACK CASTER Poly wheel tongue jack caster Caster is rated 800 lb. to fit 2" tubes - on 2,000 - 5,000 lb. jacks 6" poly wheel with snapper pin & clip Zinc finish Clamshell pack 500245 REMOVABLE CASTOR
|
|
Rampage new JK Wrangler Hi Lift Jack mount lets you install the jack to the JK tailgate hinges with minimal drilling. Will fit with a 35" tire without modifications. If used with spare tire extenders or aftermarket heavy duty tailgate tire carriers you can fit up to a 37" tire with the jack. Will not work with Swing away tire carriers. Hardware included to mount brackets to hinges. *Optional lock available for the jack mount #86613.
Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
2 and 4-door models
Mounts to existing factory rear tailgate hinges
Not for use with swing away tire carriers
Hardware included
Works with up to a 35" tire
Drilling required
|
1000 lbs. Zinc Plated Swivel Jack with 6" Poly Wheel
Designed for use with marine and utility trailers. Includes all the necessary mounting hardware. Features:
|
|
This item can NOT be shipped to these states CA
STEEL ADJUSTABLE FLOOR JACK 15 ga steel designed for remodeling Galvanized top swivel plate w/adj. SAE screw H-D high carbon steel inside & outside tube Adjusting holes 3" apart Immersion-dipped coating to prevent corrosion CLR denotes Compression Load Range JC4 1 FT. 0,1 FT. 4 IN. 18K 15GA ADJ JACK SIZE:1'-1' 4"x#15 DESC:18,000 lb CLR |
|
Get your Hi-Lift style jack out of the elements with this roll bar mounting kit from Rugged Ridge. Storing your jack outside leaves it vulnerable to water, debris, ice and theft. These great new brackets allow you to secure your jack to the sport bar without sacrificing cargo area storage and increase the longevity and function of your jack! The simple no drill installation allows for easy removal and storage of the jack. Fits all 1992-10 Jeep Wranglers.
Fits 1992 to 2012 Wrangler, Rubicon and Unlimited
No drill installation
Securely mounts Hi-Lift jack to roll bar
Keeps jack safe from salt, dirt, debris and theft
|
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate. Cast and steel jack Black powder coat Overall length: 41" Max lift height: 27" Weight: 25lbs.
|
12 TON BOTTLE JACK KIT
|
JT's Strong Arm 314594 Replacement T-Bolts:Package of 2 T-boltsUsed to tighten stabilizer armsFor use with JT's Strong Arm Stabilizer Jacks
|
|
Features- The First 2-Speed Gearbox Designed with a Drop Leg Jack in Mind- BULLDOGs 2-speed 12, 000 lb- support capacity square jack makes cranking easier when fully loaded and faster when unloaded- In low gear, the ratio delivers full lifting power at a super-smooth, easy-lifting 27 turns per 1 in- planetary and 29 turns per 1 in- traditional of travel- In high gear, the cranking ratio is a speedy 9 turns per 1 in- of travel, the fastest in its weight class-- State of the art 2 speed gearbox with power and speed for the most effective and efficient jack at all loads-- Designed for todays standard agricultural, construction and industrial trailer applications-- User friendly design makes operation smooth and easy-- Engineered alloys for enhaced strength, stability and sideload capability-- Planetary gearbox fits within the width profile of the jacks outer tube, eliminating the need for spacers-- Dimenstions - 36 x 17 x 12-5 in-- Item weight - 77 lbs- SKU: CQNT1034
|
Recovery equipment, appropriately selected to suit your 4x4 and environment, is essential when venturing off the beaten path.
|
|
|
|
|
Copyright © 1999-2022 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |