This item can NOT be shipped to these states CA
SUNTUF RIDGE CAP FLASHING Flexible flashing adjusts to desired pitch &- gives projects a finished look For use w/Suntuf Corrugated Poly Panels 108654 4 FT. 2X12 IN. GR RID CAP FLASH SIZE:4' 2" x 12" COLOR:Solar Gray |
Ideal for premium construction and for difficult applications like re-insulation and spray foam. "PROVENT" may be installed prior to the soffit panel installation without fear of blow-out. Made with Pro-Grade tear resistant high impact plastic. Rigid vent
construction eliminates breakage during re-insulation. Full joist coverage for maximum air flow.
Wdth x Lgth In=14 x 48
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
For all AR10 series ridge vent.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Helps resist snow infiltration in harsh winter climates. Prevent roof rot in attic or roof deck. Minimize peeling and extend the life of exterior and interior paint. Limits mold growth. Allows heat/condensation to escape at most effective location. Shingl
e-over design blends into ridge line. Watertight, passes 110-MPH wind-driven rain test. External baffles help deflect wind/rain, no end caps needed. 1/8" louver spacing helps keep insects out. Energy-efficient, crush-resistant, with internal structural su
pport for added durability. Flexible 3-point hinge for installation on 3:12 to 16:12 sloped roofs. 40' replaces 18 conventional or ten 12" turbine roof vents. Quick alignment, special tabs for easy, reliable connection. No overdrive, reinfo
rced nail holes. "EasyTear" feature allows product to be hand-torn in 3" increments. Edge overhang allows smooth, continuous coverage between sections. Provides 18 sq.in/linear foot net-free ventilating area. Works with traditional size ridge cap shingles
. Boxed.
Wdth In x Lgth Ft=13.7 x 4Color=Black
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Wdth x Lgth In=22 x 48
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Internal aerodynamic curved baffles. 18 square inches of net free ventilating area per lineal foot. External perpendicular omni baffles. Weatherproof under-lapping joint. Four drain holes per foot per side. External venturi baffle. Pre-formed to 3/12 pitc
h. 10 supported nail holes. Alignment tabs. External water shield. Slot width guide lines. Adjusts from 2/12 to 16/12 roof pitches. Co-polymer materials. Limited lifetime warranty- the engineered material guarantees it will last as long as your shingles.
No connectors required. Molded fanfold end plugs - no accessories or alterations needed. Miami Dade County Approved 16-0510.27. 95 CFM at wind velocity of 3 MPH; 235 CFM at wind velocity of 8 MPH; 430 CFM at wind velocity of 15 MPH; OR4 wi
th nails and OR4 with screen available.
Lgth Ft=4Color=Black
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Shingle-over to blend into ridge line. Allows heat/condensation to escape at most effective location. Watertight, passes 110-MPH wind-driven rain test. External baffles help deflect wind/rain, no end caps needed. Prevents roof rot in attic or roof deck. M
inimize peeling and extend the life of exterior and interior paint. Limit mold growth. Specially-designed louver spacing helps keep insects out. Energy-efficient, crush-resistant, with internal structural support for added durability. Extra-flexible hinge
design for installation on 3:12 to 16:12 sloped roofs. 3" ring shank nails included to insure proper fastening. Edge overhang for smooth, continuous coverage between sections. Provides 18 sq.in/linear foot net-free ventilating area. 40' re
places 18 conventional or ten 12" turbine roof vents. Hip/ridge compatible with traditional sizes (11-1/2 x 12"). "EasyTear" feature allows product to be hand-torn in 3" increments. Boxed.
Wdth In x Lgth Ft=13.7 x 4Color=Black
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Use under asphalt shingles, metal roofing, cedar shakes or slate; virtually invisible with low-profile design; no baffle to collect debris or clog; HDPE crush-resistant material; adapts to roof pitches 3/12 to 20/12; certified by ICC, BOCA, ICBO, UL CLASS
A or C, TDI and Miami Dade county.
Black
Wdth In x Lgth Ft=9 x 20
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
One-piece construction. 3/8" x 1/2" slotted weep holes in wind baffles for water run-off. 1/8" x 1" louvered openings inverted to block weather infiltration. Can be cut to desired length at 2-foot intervals. Pre-notched nail holes. 2" wide nailing flange.
Male/female connections - no straps necessary. Adjustable from 3/12 to 12/12 roof pitches. 18 square inches of net free ventilating area per lineal foot. Miami Dade County Approved 16-0510.24. 43 CFM at wind velocity of 3 MPH; 117 CFM at wind velocity of
8 MPH; 221 CFM at wind velocity of 15 MPH.
Lgth Ft=8Color=Brown
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Tight-fitting, high-density foam end plug. To be used in conjunction with LPR ridge vents.
Color=Black
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Use under asphalt shingles, metal roofing, cedar shakes or slate; virtually invisible with low-profile design; no baffle to collect debris or clog; HDPE crush-resistant material; adapts to roof pitches 3/12 to 20/12; certified by ICC, BOCA, ICBO, UL CLASS
A or C, TDI and Miami Dade county.
Black
Wdth In x Lgth Ft=11-1/4 x 4
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
The polystyrene material provides a lightweight water resistant air channel. Ideal for high volume new construction or lower cost re-insulation. Perforated center line to fit all applications. Wide nailing flange and center strut allows for easy installat
ion. Economical way to meet energy code requirements for attic air flow.
Wdth x Lgth In=22 x 48
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Use on roof pitches from 3/12 to 20/12. Helps remove excess heat and moisture to protect against premature roof deterioration and helps prevent problems with birds, insects and animals in attic. Prevents roof rot in attic or roof deck. Minimizes peeling a
nd extends the life of exterior and interior paint. Limits mold growth. Easy to install, shingle over design is virtually invisible when installed. Includes "Smart Nails" for hand-nailing, or 1-3/4" coil nails for nail guns. Meets or exceeds all code requ
irements. 16.9 sq. ins. per linear foot of net free ventilating area when hand-nailed. 14.1 sq. ins. per linear foot of net free ventilating area when using nail gun. Will not crack or dent during installation. Won't corrode, rust, or turn
brittle. Works with traditional size ridge cap shingles.
Wdth In x Lgth Ft=10.5 x 20
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Color=Clear
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Black
Wdth In x Lgth Ft=11-1/4 x 20
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Can be installed with a pneumatic nail gun or hammer. Two coils of 1-3/4" nails provided. External convolute baffles - incurved design allows flexibility to roll up and out while maintaining its shape. Can be cut at one foot intervals - multiple cut lines
eliminates unnecessary scrap. Weather protection and performance with no filter to clog. Molded fanfold end plug. Molded centerline. Nail holes marked every 6" - supported every foot. 11 square inches of net free ventilating area per lineal foot. Externa
l venturi baffle. Adjusts from 2/12 to 16/12 roof pitches. Limited lifetime warranty- the engineered material guarantees it will last as long as your shingles. Miami Dade County Approved 13-0701.11. 52 CFM at wind velocity of 3 MPH; 148 CFM
at wind velocity of 8 MPH; 283 CFM at wind velocity of 15 MPH.
Wdth In x Lgth Ft=14-1/2 x 30Color=Black
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Tight-fitting, high-density foam end plug. To be used in conjunction with VUR ridge vents.
Color=Black
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
"PRORidge" Airfoil designed edge allows smooth airflow over the ridge line maximizing effective ventilation from the attic space while deflecting blowing debris; internal baffles and drainage openings easily deflect and direct away extreme weather; molded
nail supports; code regulated insect grill; net free area: 18.3 sq. inches per linear foot/118 sq-cm per linear foot; roof pitch range 3/12 - 12/12; injection molded from pure, high grade polypropylene with premium UV inhibitor additives. Available for u
se with either metric or imperial size shingles.
Lgth mm=1219.2Color=Brown
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |