RoadPro Stainless Steel CB Antenna Stud with SO-239 Connector has been designed to handle large and heavier antenna with ease. The stainless stud offers heavy-duty mounting capabilities that can be depended on.
|
Your antenna will be sturdy and secure with this heavy-duty stainless steel antenna stud. Designed for quick and easy installation it(TM)ll have you ready for the road (TM) fast!
|
12 Volt power plug with positive and negative brass push posts for easy installation. Works with any 12 Volt vehicle socket or accessory outlet and has 12 Volt DC 10 Amp output with fused plug
|
The Little Wil magnet mount CB antenna kit is the perfect choice for a short antenna with maximum performance. The large 10oz. magnet has 300 watts of power handling capability and is made with high-impact thermoplastic. The heavy-duty coil uses 14-gauge copper wire and is a low-loss coil design. 36-inch 17-7 PH stainless steel whip base load antenna with 15-foot coax cable. With this short antenna you no longer have to remove it when driving into areas with low clearance.
|
The T2000 Series mobile CB trucker antenna with 10-inch shaft in black with 49-inch stainless steel whip rated at 3500 Watts. Standard 3|8-inch x 24-inch chromed brass ferrule. Larger coiled housing allows for increased power handling. The patented low loss air wound coil design used 10-gauge silver plated wire. The black coil is made of high impact engineered thermoplastic. Frequency range: 26MHz to 30MHz static reducing weather cap weather-band ready.
|
The aluminum CB antenna mount with gum drop stud is specifically designed for Wilson and heavy shaft coil type antennas. Made of aircraft quality aluminum with stainless steel hardware and an ABS material stud it also has a SO-239 connector for plug to plug hook-up.
|
This antenna 3|8-inch x 24 maxi stud with SO-239 connector has heavy-duty stainless steel construction and is specially designed for larger CB radios satellite radio and 10-meter radio antennas.
|
The heavy-duty stainless steel CB antenna spring fits most fiberglass CB antennas up to 5-feet with standard 3|8-inch x 24 thread fitting reducing antenna vibration. Product dimensions (Height and Depth) 3.5-inch x 1-inch.
|
A universal design works with all satellite radio services and has a stainless steel mirror mount and a 21 foot military specification RG-58U cable with gold plated connectors and a hermetically sealed antenna. Frequency: 2320.0 to 2345.0MHz. Satellite Gain: 5dB ice Typical / Terrestrial Gain: -1dB ice Typical. Noise Figure: 1.0dB Max. Current consumption: 45mA Typical/55mA Maximum. Supply voltage: 4.7-Volts Typical. Operating temperature: -40¦F to 220¦F. Feature:
|
This platinum series 2 foot black fiberglass CB antenna whip has a 16-gauge copper wire for handling 1000 Watts. It features a UV protected anti-static PVC jacket and is top loaded and helically wound.
|
This platinum series 3 foot black fiberglass CB antenna whip has a 16-gauge copper wire for handling 1000 Watts. It features a UV protected anti-static PVC jacket and is top loaded and helically wound.
|
Extra heavy-duty stainless steel assembly stud with SO239 plug to plug type connection.
|
The Terminator II high-power CB antenna hosts 15 000 Watts pf power with a frequency range of 26MHZ to 29MHZ. Specifically engineered for CB 10 and 11 meter radios it has an extra heavy-duty triple-chrome plated stainless steel design with a dual helix designed coil and is corrosion resistant. It features maximum air cooling for increased performance and is perfect for broadband applications.
|
This stainless steel 3|8 inch antenna stud has a chrome plated lug connector
|
This Wilson antenna is the most powerful center-loaded mobile CB antenna in the world. With 5 000 AM and 20 000 SSB watts power handling capability a low loss coil design and 49-inch 17-7PH tapered spring stainless-steel whip the T5000 is a truckers dream. High-impact Mobay thermoplastic protects your antenna in all kinds of weather and the removable coil offers safe storage and makes it easier to pull into a garage. Includes 5-inch and 10-inch shafts and is weather band ready.
|
Wilson replacement CB antenna whip for T2000 and T5000 series antennas with a 49-inch stainless steel tapered whip with tip.
|
The Wilson 3 foot Silver Load FGT Series fiberglass whip in black features Wilsons Tunable Tip that allows for fine-tuning SWR and resonant frequency. The 3|8-inch diameter fiberglass rod construction has a standard 3|8-in. x 24-in. chromed brass ferrule and fully linear top-loaded maximum transfer power. It has a unique ground lead to help ensure reduced static ignition interference and a static reducing weather cap. It is weather-band ready and has a black PVC protective weather covering.
|
This platinum series 3 foot white fiberglass CB antenna whip has a 16-gauge copper wire for handling 1000 Watts. It features a UV protected anti-static PVC jacket and is top loaded and helically wound.
|
This 5 in. super strong magnet with non corrosive black anodized finish is pre-wired and sealed to prevent corrosion. It can be used with antennas up to 4 ft.
|
The gum drop CB antenna stud is made of ABS material and has a SO-239 connector for plug to plug hook-up. Specifically designed for surface or roof mount applications and can be used with Wilson and heavy shaft oil can type antennas.
|
This platinum series 4 foot black fiberglass CB antenna whip has a 16-gauge copper wire for handling 1000 Watts. It features a UV protected anti-static PVC jacket and is top loaded and helically wound.
|
This CB antenna magnet mount kit features a 12-inch Rubber Duckie whip and a 17-foot RG58U coax cable with a PL-259 connector and is perfect for all 27 MHZ CB transceivers. It has frequency coverage of 26.965 to 27.405 MHZ. The heavy-duty 3-inch magnetic base has an attached 17-foot coaxial cable.
|
This platinum series 2 foot white fiberglass CB antenna whip has a 16-gauge copper wire for handling 1000 Watts. It features a UV protected anti-static PVC jacket and is top loaded and helically wound.
|
The Wilson 4 foot Silver Load FGT Series fiberglass whip in black features Wilsons tunable tip that allows for fine-tuning SWR and resonant frequency. The 3|8-inch diameter fiberglass rod construction has a standard 3|8-in. x 24-in. chromed brass ferrule and fully linear top-loaded maximum transfer power. It has a unique ground lead to help ensure reduced static ignition interference and a static reducing weather cap. It is weather-band ready and has a black PVC protective weather covering.
|
The T2000 Series mobile CB trucker antenna with 10-inch shaft in white with an American flag design has a 49-inch stainless steel whip rated at 3500 Watts. Standard 3/8-inch x 24-inch chromed brass ferrule. Larger coiled housing allows for increased power handling. The patented low loss air wound coil design used 10-gauge silver plated wire. The black coil is made of high impact engineered thermoplastic. Frequency range: 26MHz to 30MHz static reducing weather cap weather-band ready.
|
This platinum series dual mirror mount CB antenna kit features 16-gauge copper wire for handling 1000 Watts with maximum output and reception. The coax cable is hermetically sealed for extra protection with a UV protected anti-static black PVC jacket. It has a 100% non-corrosive clear anodized mount with stainless steel hardware. The kit includes two 3 foot black antennas two mounts and an a 18 foot coax cable.
|
The Wilson 3 foot Silver Load FGT Series fiberglass whip in white features Wilsons tunable tip that allows for fine-tuning SWR and resonant frequency. The 3|8-inch diameter fiberglass rod construction has a standard 3|8-in. x 24-in. chromed brass ferrule and fully linear top-loaded maximum transfer power. It has a unique ground lead to help ensure reduced static ignition interference and a static reducing weather cap. It is weather-band ready and has a black PVC protective weather covering.
|
This platinum series 4 foot white fiberglass CB antenna whip has a 16-gauge copper wire for handling 1000 Watts. It features a UV protected anti-static PVC jacket and is top loaded and helically wound.
|
4' Flexible Silver Load Series CB antenna fiberglass whip with .in Tunable Tip .in allows for fine tuning SWR resonant frequency. The 200 Watt antenna whip with 1/4 .in diameter tapered fiberglass construction has a chromed brass ferrule and standard 3/8 .in x24 threads. In an exclusive dark gray color and 22-gauge silver plated wire to provide higher efficiency the unique ground lead helps to insure reduced static and ignition interference and has a static reducing weather cap.
|
The Wilson 2' Silver Load FGT Series Fiberglass Whip features Wilson's .in Tunable Tip .in that allows for fine tuning SWR and resonant frequency. The 3/8 .in diameter fiberglass rod construction has a standard 3/8 .in x 24 .in chromed brass ferrule and fully linear top loaded maximum transfer power. With an 18-gauge silver plated copper wire to provide higher efficiency it has a unique ground lead to help insure reduced static ignition interference and a static reducing weather cap. It is weather-band ready and has a black PVC protective weather covering.
|
The T2000 Series mobile CB trucker antenna with 10-inch shaft in white with 49-inch stainless steel whip rated at 3500 Watts. Standard 3|8-inch x 24-inch chromed brass ferrule. Larger coiled housing allows for increased power handling. The patented low loss air wound coil design used 10-gauge silver plated wire. The black coil is made of high impact engineered thermoplastic. Frequency range: 26MHz to 30MHz static reducing weather cap weather-band ready.
|
5101 8' Classic VHF Antenna with 15' Cable - Reduced Length Version END-FED WITH MATCHING STUB A standard of excellence in an economical antenna! Shakespeare brings you the best of the high-end features in an 8' antenna with a brass element and a smooth, high gloss, polyurethane finish that wont turn yellow in the sun. This antenna delivers not only performance, but superb value. Features:
Technical Specifications:
|
|
|
|
|
Copyright © 1999-2022 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |