Battery Status and Freedom Inverter/Charger Remote Control

Provides Valuable Inverter/Charger System Monitoring and Control

The Freedom Remote Control Panel (part#84-2056-01) allows you to control your Freedom Combi, Freedom 458 and Freedom Marine Series Inverter/Charger system from any convenient location. It is easy to read, operate and install, and all controls can be accessed directly from the front panel.

Note: Not for Freedom HF or Freedom SW Series.

Product Features

• Independent invert and charge on/off controls
  
• Push button control of power sharing, equalizing, battery set-up
  
• Multi-colored LED displays battery state of charge, fault conditions, AC input, DC voltage and DC amperage
  
• LED warning indictors for low battery and overload warning
  
• Splash resistant design
  
• Incoming AC breaker selection allows programmable power sharing
  
• Easy to install
  
• 25' Cable
  
• One year warranty

Note: The 24-volt models of Freedom Combi inverter/chargers require a different Freedom Remote the Freedom Remote - 24V SKU 82-0101-04

WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

450W Modified Sine Wave Inverter - 12V

SAM Series low interference, high efficiency modified sine wave DC-AC inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz. Connect through any 12V lighter socket in your car, boat, truck or RV.

Includes two three prong outlets and a USB Charging Port.

ETL safety listed.

Features:

• USB charging port: 5 VDC, 2.1A
• 2 three prong outlets
• 2 X Surge
• Compact design
• Cigar lighter plug and battery clamps included
• Load controlled cooling fan
• Low battery input alarm
• Universal protection circuit: thermal, battery, overload, short circuit, earth fault
• Soft start technology
• Cool surface technology
• Low interference technology

Specifications:

• Input: 12 VDC
• Output: 115 VAC
• Watts: 450
• Surge: 900 Watts
• Outlets: 2
• Weight: 1.6 (lbs)
• Weight: 0.7 (kg)
• Dimensions: 5 x 6 x 2 (in)
• Dimensions: 12.7 x 15.2 x 5.1 (cm)
• Safety: ETL
• Warranty:2 Year Limited

Applications:

• Television (up to 32")
• Blender
• Laptops
• Cell Phones
• Cameras
• MP3 Players
• Handheld Video Games
• Lights/Lamps
• Portable Stereos
• CD/DVD Players

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

800W Modified Sine Wave Inverter - 12V

SAM Series low interference, high efficiency modified sine wave DC-AC inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz.

Features:

• USB charging port +5 VDC, 2.1A
• 2 three prong outlets
• Compact design
• Load controlled cooling fan
• 2 X Surge
• Low battery input alarm
• Universal protection circuit: thermal, battery, overload, short circuit, earth fault
• Soft start technology
• Cool surface technology
• Low interference technology

Specifications:

• Input: 12 VDC
• Output: 115 VAC
• Watts: 800 Watts
• Surge: 1600 Watts
• Outlets: 2
• Weight: 4.5 (lbs)
• Weight: 2.05 (kg)
• Dimensions: 8 x 7 x 2.25 (in)
• Dimensions: 20.3 x 17.8 x 5.7 (cm)
• Safety: ETL
• Warranty: 2 Year Limited

Applications:

• Television (up to 32")
• Portable Vaccum
• Blender
• Laptops
• Cell Phones
• Cameras
• MP3 Players
• Handheld Video Games
• Lights/Lamps
• Portable Stereos
• CD/DVD Players

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1000W Modified Sine Wave Inverter - 12V

SAM Series low interference, high efficiency modified sine wave DC-AC inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz.

ETL safety listed.

Features:

• Compact design
• Load controlled cooling fan
• Low battery input alarm
• Universal protection circuit: thermal, battery, overload, short circuit, earth fault
• Soft start technology
• Cool surface technology
• Low interference technology

Specifications:

• Input: 12 VDC
• Output: 115 VAC
• Watts: 1000 Watts
• Surge: 2000 Watts
• Outlets: 2
• Remote Control: SAM-RC
• Weight: 3.69 (lbs)
• Weight: 1.72 (kg)
• Dimensions: 7.1 x 9.84 x 2.32 (in)
• Dimensions: 180 x 250 x 59 (mm)
• Safety: ETL
• Warranty: 2 Year Limited

Applications:

• Solar power systems
• Emergency backup power
• Service vehicles
• Mobile offices
• Recreational vehicles, camping
• Telecommunications
• Field work/construction sites
• Home electronics: TV, DVD and video games
• Tools and appliances

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2200W Pure Sine Inverter/Charger - 12V

EVOLUTION™ Series Inverter/Charger

Pure sine wave inverter, adaptive battery charger, transfer relay – All in ONE unit. Samlex Evolution™ Series inverter/chargers provide reliable AC power wherever it’s needed. For use with boats, RVs, cabins and specialty vehicles, as well as alternative energy, back-up and emergency power applications

Using state-of-the-art technology, the Samlex EVO™ inverter/charger operates at 165 million instructions per second with lightening fast load & response times, has 9 points of physical protection monitoring (being scanned up to 10,000 times per second) to detect fault conditions & protect itself in a vast range of adverse environments

The EVO-2212 is a 2200 Watt Pure Sine inverter, 12 VDC input, 120 VAC output, 50/60 Hz. It intelligently integrates a 100 Amp 4 stage Battery Charger and a 40 Amp Transfer Relay into an advanced and affordable off-grid power solution

AC Inputs

• Two separate AC inputs – one for grid (priority #1), one for generator (priority #2), connect simultaneously, no need to reconfigure when different power sources are available
• Generator Input is specifically designed to have more tolerance for wave form distortion, prevents unnecessary “rejection of AC input and switch to inverter” by tolerating distorted wave forms that can be produced by gritty generators
• Each AC input is programmable for voltage and frequency. User determines what the min and max thresholds are to switch from Grid or Generator to Inverter
• Generator start can be initiated by “Status Relay” contact, can be programmed to activate when grid is lost

Solar Input

• Connect a solar charge controller directly to the EVO™ though the Battery Charger external DC Input, seamlessly integrates solar charging into the EVO’s power system
• ONLINE Mode can be used to prioritize Batteries/Inverter over the grid, ideal for those wishing to operate primarily on solar power (when the grid is available, but might be costly)

Battery Charger

• 3 or 4 stage charging with Equalization (must be manually initiated)
• Adaptive algorithm is used during Bulk to assess the condition of the battery. Subsequent stages are then based on the condition of the battery rather than pre-set time periods for Absorption and Float. Prevents unnecessary charging, extends the life of batteries
• Programmable – set battery voltage thresholds to initiate charging

Transfer Switch

• Zero transfer time when switching from Inverter to Grid. When grid comes on, the inverter synchronizes with the wave form and then transfers instantly at zero crossing
• ‹16ms transfer when going from Grid to Inverter. When grid is lost, the transfer relay switches to inverter at the correct place in the wave form, the transfer takes less than 16ms

Surge Capacity (Power Boost)

• The EVO™ has 3X surge power
• Additionally, the EVO™ has large power overload allowances available for long periods of time. Increased inverter capacity means you can size your inverter smaller to handle heavy surge loads, reducing costs

State-of-the-Art Technology

• The EVO™ operates at 165 million instructions per second producing lightning fast load and response times
• The EVO™ is practically indestructible. It has “Bullet-Proof Intelligence” in the form of 9 physical points of protection monitoring being scanned up to 10,000 times per second for adverse conditions. The EVO™ will detect fault conditions and initiate a healthy shutdown before any product damage can be done.
• The E

1500W Pure Sine Wave Inverter - 12V w/LCD Display Remote Control

SSW Series

Ideal for powering office equipment, television, DVD, Video Games, battery chargers and other sensitive loads from your car, truck, boat, RV, or Solar System batteries!

Features:

• Free remote control with LCD Display included!
• High performance, high surge power
• True sine wave output for sensitive loads
• Economically priced
• Samlex “Soft Start” & “Low Interference” technology
• Universal Circuit Protection: thermal, battery, overload, short circuit & earth fault
• Cool surface technology

Specifications:

• Input: 12 VDC
• Output: 115 VAC
• Watts: 1500 Watts
• Surge: 3000 Watts
• Outlets: 2
• Fuse: 200 A
• Remote Control: SSW-R1-12
• Weight: 7.8 (lbs)
• Weight: 3.6 (kg)
• Dimensions: 8.74 x 13.11 x 3.50 (in)
• Dimensions: 22.2 x 33.3 x 8.9 (cm)
• Safety: ETL
• Warranty: 2 Year Limited

Applications:

• Service vehicles
• Mobile Offices
• Boats
• Recreation Vehicles, Camping
• Telecommunication
• Field work / Construction sites
• Solar power systems
• Emergency backup power
• Home electronics: TV, VCR, video games
• Computers, printers

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2000W Pure Sine Wave Inverter - 12V w/LCD Display Remote Control

SSW Series

Ideal for powering office equipment, television, DVD, Video Games, battery chargers and other sensitive loads from your car, truck, boat, RV, or Solar System batteries!

Features:

• Free remote control with LCD Display included!
• High performance, high surge power
• True sine wave output for sensitive loads
• Economically priced
• Samlex “Soft Start” & “Low Interference” technology
• Universal Circuit Protection: thermal, battery, overload, short circuit & earth fault
• Cool surface technology

Specifications:

• Input: 12 VDC
• Output: 115 VAC
• Watts: 2000 Watts
• Surge: 4000 Watts
• Outlets: 2
• Fuse: 300 A
• Remote Control: SSW-R1-12
• Weight: 9 (lbs)
• Weight: 4 (kg)
• Dimensions: 8.74 x 13.11 x 3.50 (in)
• Dimensions: 22.2 x 33.3 x 8.9 (cm)
• Safety: ETL
• Warranty: 2 Year Limited

Applications:

• Service vehicles
• Mobile Offices
• Boats
• Recreation Vehicles, Camping
• Telecommunication
• Field work / Construction sites
• Solar power systems
• Emergency backup power
• Home electronics: TV, VCR, video games
• Computers, printers

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2750W Modified Sine Wave Inverter - 12V

PSE Series

This high efficiency modified sine-wave DC-AC inverter converts 12 Volts DC (Nominal) to 2750 watts of AC power at 120 Volts, 60 Hz. The unit comes with a set of battery cable lugs. Output AC power is available by means of hardwire connection (NEMA 5-15R receptacles with 15 Amp breaker optional accessory). Features include overload, over-temperature, low input and high input voltage protection. The front-end LED display indicates battery voltage and output power levels.

Features:

• Switching mode design
• High efficiency
• Modified sine wave output voltage
• 12 VDC input and 120 VAC output
• Overload protection
• High output current surge
• Low battery alarm / shut down
• Low idle power draw of less than 0.05 Amps
• Compact and light weight
• One output receptacle
• Configuration also enables hardwiring to multi-outlets

Specifications:

• Input: 12 VDC
• Output: 120 VAC
• Watts: 2750 Watts
• Surge: 4500 Watts
• Outlets: 1
• Fuse: 30Ax12
• Remote Control: RC-15
• Weight: 24 (lbs)
• Weight: 10.88 (kg)
• Dimensions: 17 x 8 x 6 (in)
• Dimensions: 43.2 x 20.3 x 15.2 (cm)
• Warranty: 2 Year Limited

Applications:

• Service vehicles
• Mobile Offices
• Boats
• Recreation Vehicles, Camping
• Telecommunication
• Field work / Construction sites
• Solar power systems
• Emergency backup power
• Home electronics: TV, VCR, video games
• Computers, printers, monitors, fax machines
• Tools and appliances

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

400A Inverter Installation Kit f/3500W Inverter

Samlex’s Inverter Installation Kit contains a pair of heavy duty cables and a fuse assembly that is used to connect the inverter to the battery bank. The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.

Specifications:

Input: 2500-3500 Watts / 5000-7000 Watts
Output: 12 V / 24 V
Amps: 400 Amps
Fuse: 400 Amps
Weight: 17.5 (lbs)
Weight: 7.93 (kg)
Dimensions: *comes with 10ft of cable x 2
Warranty: 2 Year Limited

Applications:

The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Portable Solar Charging Kit - 90W

Samlex Portable MSK Charging Kits are easy to use! Just unfold, plug in and start charging. Capture the power of the sun without complicated installations, brackets or electrical diagrams. Each Kit comes with a convenient insulated carrying case that also protects the panels when stored.

Your Kit Includes:

• 3 x 30W Solar Modules for charging 12V Lead Acid Batteries
• 10 Amp Charge Controller
• Includes a 2-pin bullet adapter for use in solar ready RV's
• Protective carrying case
• (Battery Not Included)

Features:

• Solar panel is pre-wired with battery clamps for a quick and easy connection, 16’ cable
• Turn the panel a few times per day and increase charging by 30%
• Adjustable legs allow for maximum sun exposure
• Folding crystalline panels in anodized aluminum frames, won’t rust
• Built-in 10 Amp Charge Controller manages the charge to the battery and prevents overcharging
• For 12V Lead Acid Batteries
• Includes protective carrying case
• NOTE: Battery is not included

Specifications:

• Watts: 90 Watt Solar Module for 12V Lead Acid Batteries
• Amps: 10 Amps
• Weight: 25.2 (lbs)
• Weight: 11.45 (kg)
• Dimensions: 40.75 x 25.39 x 1.18 (in) Open
• Dimensions: 1035 x 645 x 30 (mm) Open
• Warranty: 10 Year Power Warranty on Solar Panels (Canada/US)

Applications:

• Recreational Vehicles
• Off-grid/mobile solar systems
• Power supply for remote equipment
• Water pumping systems
• Rural electrification
• Small home power systems
• 12V Lead Acid battery charging system
• Other industrial and consumer applications

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2750W Modified Sine Wave Inverter - 24V

PSE Series

This high efficiency modified sine-wave DC-AC inverter converts 24 Volts DC (Nominal) to 2750 watts of AC power at 120 Volts, 60 Hz. The unit comes with a set of battery cable lugs. Output AC power is available by means of hardwire connection (NEMA 5-15R receptacles with 15 Amp breaker optional accessory). Features include overload, over-temperature, low input and high input voltage protection. The front-end LED display indicates battery voltage and output power levels.

Features:

• High efficiency PWM design
• LED bar graphs indicate input voltage, input current and output power
• Temperature controlled cooling fan
• Low input voltage warning alarm
• Optional remote operation with Samlex Model RC-15 remote control (sold separately)
• Protections: high/low DC input voltage, over temperature and over load shut down
• High output power surge

Specifications:

• Input: 24 VDC
• Output: 120 VAC
• Watts: 2750 Watts
• Surge: 4500 Watts
• Outlets: 1
• Fuse: 15A x 12
• Remote Control: RC-15
• Weight: 16.2 (lbs)
• Weight: 7.35 (kg)
• Dimensions: 8.07 x 19.49 x 6.3 (in)
• Dimensions: 205 x 495 x 160 (mm)
• Warranty: 2 Year Limited

Applications:

• Service vehicles
• Mobile Offices
• Boats
• Recreation Vehicles, Camping
• Telecommunication
• Field work / Construction sites
• Solar power systems
• Emergency backup power
• Home electronics: TV, VCR, video games
• Computers, printers, monitors, fax machines
• Tools and appliances

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

600W Pure Sine Wave Inverter - 12V

SSW Series

SSW Series high efficiency pure sine wave inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz. Newly designed, these compact and lightweight models feature soft start technology and 2X the surge. Economically priced for reliable pure sine wave power.

Includes 2 three prong outlets and a USB charging port.

Features:

• USB Charging Port
• 2 three prong outlets
• Comes with battery clamps
• High performance, high surge power (2X)
• True sine wave output for sensitive loads
• Economically priced
• Samlex “Soft Start” & “Low Interference” technology
• Universal Circuit Protection: thermal, battery, overload, short circuit & earth fault
• Cool surface technology

Specifications:

• Input: 12 VDC
• Output: 115 VAC
• Watts: 600
• Surge: 1200 Watts
• Outlets: 2
• Fuse: 80 Amps
• Weight: 2.4 (lbs)
• Weight: 1.1 (kg)
• Dimensions: 6.10 x 10.0 x 2.32 (in)
• Dimensions: 15.5 x 22.5 x 5.9 (cm)
• Safety: ETL
• Warranty: 2 Year Limited

Applications:

• Service vehicles
• Mobile Offices
• Boats
• Recreation Vehicles, Camping
• Telecommunication
• Field work / Construction sites
• Solar power systems
• Emergency backup power
• Home electronics: TV, DVD, video games

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

300W Pure Sine Wave Inverter - 24V

PST Series (120 VAC)

This high efficiency DC-AC inverter converts 24 Volts DC to 300 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with detachable cable with 12V plug adaptor and cable with battery clamps. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 0.5 Amps. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.

Features:

• High efficiency
• Temperature controlled cooling fan – reduces energy consumption
• Low interference Wide operating DC input range: 21.0 - 33.0 VDC
• LED indicators for power and protections
• Low idle power draw
• Dual GFCI protected AC outlets
• Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up
• UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
• Detachable cable with 12V plug adapter
• Detachable cable with battery clamps
• Safety certified to UL standards, FCC compliant

Specifications:

• Input: 24 VC
• Output: 120 VAC
• Watts: 300
• Surge: 500 Watts
• Weight: 3.46 (lbs)
• Weight: 1.57 (kg)
• Dimensions: 6.1 x 9.69 x 2.58 (in)
• Dimensions: 155 x 246 x 65.5 (mm)
• Safety: ETL to UL Standard
• Warranty: 2 Year Limited

Applications:

• Service vehicles
• Mobile Offices
• Boats
• Recreation Vehicles, Camping
• Telecommunication
• Field work / Construction sites
• Solar power systems
• Emergency backup power
• Home electronics: TV, VCR, video games
• Computers, printers

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

300W Pure Sine Wave Inverter - 12V

PST Series (120 VAC)

This high efficiency DC-AC inverter converts 12 Volts DC to 300 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with detachable cable with 12V plug adaptor and cable with battery clamps. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 0.5 Amps. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.

Features:

• High efficiency
• Temperature controlled cooling fan – reduces energy consumption
• Low interference Wide operating DC input range: 10.5 - 16.5 VDC
• LED indicators for power and protections
• Low idle power draw
• Dual GFCI protected AC outlets
• Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up
• UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
• Detachable cable with 12V plug adapter
• Detachable cable with battery clamps
• Safety certified to UL standards, FCC compliant

Specifications:

• Input: 12 VDC
• Output: 120 VAC
• Watts: 300
• Surge: 500 Watts
• Outlets: 2
• Weight: 3.46 (lbs)
• Weight: 1.57 (kg)
• Dimensions: 6.1 x 9.69 x 2.58 (in)
• Dimensions: 155 x 246 x 65.5 (mm)
• Safety: ETL to UL Standard
• Warranty: 2 Year Limited

Applications:

• Service vehicles
• Mobile Offices
• Boats
• Recreation Vehicles, Camping
• Telecommunication
• Field work / Construction sites
• Solar power systems
• Emergency backup power
• Home electronics: TV, VCR, video games
• Computers, printers

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

600W Pure Sine Wave Inverter - 12V

PST Series (120 VAC)

This high efficiency DC-AC inverter converts 12 Volts DC to 600 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with pin-type battery cable lugs. Features include built-in electronic GFCI, overload protection, low battery alarm / shut down, low idle power draw of less than 0.5 Amps. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.

Features:

• High efficiency
• Temperature controlled cooling fan – reduces energy consumption
• Low interference Wide operating DC input range: 10.7 - 16.5 VDC
• Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up
• UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
• Low idle power draw
• Dual GFCI protected AC outlets
• Optional remote control (sold separately): Model RC-15A
• Comes with pin-type battery cable lugs
• Safety certified to UL standards, FCC compliant

Specifications:

• Input: 12 VDC
• Output: 120 VAC
• Watts: 600
• Surge: 1000 Watts
• Remote Control: RC-15A sold separately
• Weight: 5.9 (lbs)
• Weight: 2.7 (kg)
• Dimensions: 9.37 x 10.87 x 3.23 (in)
• Dimensions: 238 x 276.2 x 82 (mm)
• Safety: ETL to UL Standard
• Warranty: 2 Year Limited

Applications:

• Service vehicles
• Mobile Offices
• Boats
• Recreation Vehicles, Camping
• Telecommunication
• Field work / Construction sites
• Solar power systems
• Emergency backup power
• Home electronics: TV, VCR, video games
• Computers, printers

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1000W Pure Sine Wave Inverter - 24V

PST Series (120 VAC)

This high efficiency DC-AC inverter converts 24 Volts DC to 1000 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with pin-type battery cable lugs. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 0.85 Amps. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.

Features:

• High efficiency
• Temperature controlled cooling fan – reduces energy consumption
• Low interference
• Wide operating DC input range: 21.0 - 33.0 VDC
• Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up
• UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
• Low idle power draw
• Dual GFCI protected AC outlets
• Optional remote control (sold separately): Model RC-15A
• Comes with pin-type battery cable lugs
• Safety certified to UL standards, FCC compliant

Specifications:

• Input: 24 VDC
• Output: 120 VAC
• Watts: 1000
• Surge: 2000 Watts
• Remote Control: RC-15A sold separately
• Weight: 8.8 (lbs)
• Weight: 4.0 (kg)
• Dimensions: 9.37 x 15.63 x 3.23 (in)
• Dimensions: 238 x 397 x 82 (mm)
• Safety: ETL to UL Standard
• Warranty: 2 Year Limited

Applications:

• Service vehicles
• Mobile Offices
• Boats
• Recreation Vehicles, Camping
• Telecommunication
• Field work / Construction sites
• Solar power systems
• Emergency backup power
• Home electronics: TV, VCR, video games
• Computers, printers

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

100A Inverter Installation Kit f/1000W Inverter

Samlex’s Inverter Installation Kit contains a pair of heavy duty cables and a fuse assembly that is used to connect the inverter to the battery bank. The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.

Specifications:

• Input: 600-1000 Watts / 1200-2000 Watts
• Output: 12 V / 24 V
• Amps: 100 Amps
• Fuse: 100 Amps
• Weight: 4.2 (lbs)
• Weight: 1.9 (kg)
• Dimensions: *comes with 10ft of cable x 2
• Warranty: 2 Year Limited

Applications:

The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

200A Inverter Installation Kit f/2000W Inverter

Samlex’s Inverter Installation Kit contains a pair of heavy duty cables and a fuse assembly that is used to connect the inverter to the battery bank. The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.

Specifications:

Input: 1000-1700 Watts / 2000-3400 Watts
Output: 12 V / 24 V
Amps: 200 Amps
Fuse: 200 Amps
Weight: 6.2 (lbs)
Weight: 2.81 (kg)
Dimensions: *comes with 10ft of cable x 2
Warranty: 2 Year Limited

Applications:

The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Remote Control f/EVO Series Inverter/Chargers

Remote Control for Inverter/Chargers EVO-2212, EVO-3012, EVO-2224, EVO-4024
The EVO-RC is intelligent remote control designed specifically for use with NEW Samlex EvolutionTM Series of Inverter/Chargers.

View real-time activity on the informative 32 character LDC screen while the unit is operating: Output voltage, Frequency, Amps, Watts, Volt Amps, Power Factor, Battery Voltage, Battery Current, Solar Input Current and more.

Use the remote to program inverter and battery charging parameters. Save a parameter set on a removable 16GB SD Card (the SD card slot located on the remote face of the EVO-RC). Transfer saved parameters to other EVOTM inverter/chargers or insert the SD card into a computer and make parameter adjustments there.

Data log historic power consumption, inverter functionality, battery charging activity, faults and all of the conditions leading up to them. Analyze trends for more efficient use of off-grid resources.

Features:

• SD card slot can manage a removable SD Card up to 16GB (SD Card not included)
• Inverter/Charger performance data is logged in text file format on the SD card that can imported into Excel
• You do not need the EVO-RC for basic operation of the inverter/charger, but it is required to program parameters and for data logging
• Includes 33' of cable

Applications:

• Boats, RVs, trucks, specialty vehicles
• Alternative energy, off-grid, cabins, remote locations, areas with unreliable utility power
• Back-up and emergency power applications

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

100W Modified Sine Wave Inverter - 12V

SAM Series low interference, high efficiency modified sine wave DC-AC inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz. Connect through any 12V lighter socket in your car, boat, truck or RV. Includes one three prong outlet and a USB Charging Port. ETL Safety Listed.

Features:

• Light weight, compact, highly portable
• Easy to install and operate
• 2.1 Amp USB Port (compatible with all new release smart phones)
• Fan cooled
• Cool surface technology
• Soft start technology
• Low battery input alarm
• Universal protection circuit – thermal, battery, overload, short circuit & earth fault

Specifications:

• Input: 12 VDC
• Output: 115 VAC
• Watts: 100Watts
• Outlets: 1
• Weight: 0.3 (lbs)
• Weight: 0.14 (kg)
• Dimensions: 2.36 x 5.08 x 1.44 (in)
• Dimensions: 60 x 129 x 36.5 (mm)
• Safety: ETL
• Warranty: 2 Year Limited

Applications:

• Laptops
• Cell Phones
• Cameras
• MP3 Players
• Handheld Video Games
• Lights/Lamps
• Portable Stereos
• CD/DVD Players

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1500W Modified Sine Wave Inverter - 12V

SAM Series low interference, high efficiency modified sine wave DC-AC inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz.

ETL safety listed.

Features:

• Compact design
• Load controlled cooling fan
• Low battery input alarm
• Universal protection circuit: thermal, battery, overload, short circuit, earth fault
• Soft start technology
• Cool surface technology
• Low interference technology

Specifications:

• Input: 12 VDC
• Output: 115 VAC
• Watts: 1500 Watts
• Surge: 3000 Watts
• Outlets: 2
• Remote Control: SAM-RC
• Weight: 7.1 (lbs)
• Weight: 3.2 (kg)
• Dimensions: 7.95 x 11.14 x 3.3 (in)
• Dimensions: 202 x 283 x 84 (mm)
• Safety: ETL
• Warranty: 2 Year Limited

Applications:

• Solar power systems
• Emergency backup power
• Service vehicles
• Mobile offices
• Recreational vehicles, camping
• Telecommunications
• Field work/construction sites
• Home electronics: TV, DVD and video games
• Tools and appliances

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2000W Modified Sine Wave Inverter - 12V

SAM Series low interference, high efficiency modified sine wave DC-AC inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz.

ETL safety listed.

Features:

• Compact design
• Load controlled cooling fan
• Low battery input alarm
• Universal protection circuit: thermal, battery, overload, short circuit, earth fault
• Soft start technology
• Cool surface technology
• Low interference technology

Specifications:

• Input: 12 VDC
• Output: 115 VAC
• Watts: 2000 Watts
• Surge: 4000 Watts
• Outlets: 3
• Remote Control: SAM-RC
• Weight: 8.5 (lbs)
• Weight: 3.9 (kg)
• Dimensions: 7.95 x 13.58 x 3.3 (in)
• Dimensions: 202 x 345 x 84 (mm)
• Safety: ETL
• Warranty: 2 Year Limited

Applications:

• Solar power systems
• Emergency backup power
• Service vehicles
• Mobile offices
• Recreational vehicles, camping
• Telecommunications
• Field work/construction sites
• Home electronics: TV, DVD and video games
• Tools and appliances

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3000W Modified Sine Wave Inverter - 12V

SAM Series low interference, high efficiency modified sine wave DC-AC inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz.

ETL safety listed.

Features:

• Compact design
• Load controlled cooling fan
• Low battery input alarm
• Universal protection circuit: thermal, battery, overload, short circuit, earth fault
• Soft start technology
• Cool surface technology
• Low interference technology

Specifications:

• Input: 12 VDC
• Output: 115 VAC
• Watts: 3000 Watts
• Surge: 6000 Watts
• Outlets: 3
• Remote Control: SAM-RC
• Weight: 11.8 (lbs)
• Weight: 5.5 (kg)
• Dimensions: 7.95 x 16.53 x 3.3 (in)
• Dimensions: 202 x 420 x 84 (mm)
• Safety: ETL
• Warranty: 2 Year Limited

Applications:

• Solar power systems
• Emergency backup power
• Service vehicles
• Mobile offices
• Recreational vehicles, camping
• Telecommunications
• Field work/construction sites
• Home electronics: TV, DVD and video games
• Tools and appliances

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1250W Modified Sine Wave Inverter - 12V

PSE Series

This high efficiency modified sine-wave DC-AC inverter converts 12 Volts DC (Nominal) to 1250 watts of AC power at 120 Volts, 60 Hz. The unit comes with a set of battery cable lugs. Output AC power is available from two standard North American NEMA 5-15R receptacles. Features include overload, over-temperature, low input and high input voltage protection. The front-end LED display indicates battery voltage and output power levels.

Features:

• Switching mode design
• High efficiency
• Modified sine wave output voltage
• 12 VDC input and 120 VAC output
• Overload protection
• High output current surge
• Low battery alarm / shut down
• Low idle power draw of less than 0.05 Amps
• Compact and light weight
• Two output receptacles

Specifications:

• Input: 12 VDC
• Output: 120 VAC
• Watts: 1250 Watts
• Surge: 2500 Watts
• Outlets: 2
• Fuse: 35Ax5
• Remote Control: RC-15
• Weight: 6.6 (lbs)
• Weight: 2.99 (kg)
• Dimensions: 13.25 x 9.4 x 3.5 (in)
• Dimensions: 33.7 x 23.9 x 8.9 (cm)
• Warranty: 2 Year Limited

Applications:

• Service vehicles
• Mobile Offices
• Boats
• Recreation Vehicles, Camping
• Telecommunication
• Field work / Construction sites
• Solar power systems
• Emergency backup power
• Home electronics: TV, VCR, video games
• Computers, printers, monitors, fax machines
• Tools and appliances

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1750W Modified Sine Wave Inverter - 12V

PSE Series

This high efficiency modified sine-wave DC-AC inverter converts 12 Volts DC (Nominal) to 1750 watts of AC power at 120 Volts, 60 Hz. The unit comes with a set of battery cable lugs. Output AC power is available from two standard North American NEMA 5-15R receptacles. Features include overload, over-temperature, low input and high input voltage protection. The front-end LED display indicates battery voltage and output power levels.

Features:

• Switching mode design
• High efficiency
• Modified sine wave output voltage
• 12 VDC input and 120 VAC output
• Overload protection
• High output current surge
• Low battery alarm / shut down
• Low idle power draw of less than 0.05 Amps
• Compact and light weight
• Two output receptacles

Specifications:

• Input: 12 VDC
• Output: 120 VAC
• Watts: 1750 Watts
• Surge: 3500 Watts
• Outlets: 2
• Fuse: 35Ax5
• Remote Control: RC-15
• Weight: 12 (lbs)
• Weight: 5.44 (kg)
• Dimensions: 18 x 9.4 x 3.5 (in)
• Dimensions: 45.7 x 23.9 x 8.9 (cm)
• Warranty: 2 Year Limited

Applications:

• Service vehicles
• Mobile Offices
• Boats
• Recreation Vehicles, Camping
• Telecommunication
• Field work / Construction sites
• Solar power systems
• Emergency backup power
• Home electronics: TV, VCR, video games
• Computers, printers, monitors, fax machines
• Tools and appliances

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3000W Pure Sine Inverter/Charger - 12V

EVOLUTION™ Series Inverter/Charger

Pure sine wave inverter, adaptive battery charger, transfer relay – All in ONE unit. Samlex Evolution™ Series inverter/chargers provide reliable AC power wherever it’s needed. For use with boats, RVs, cabins and specialty vehicles, as well as alternative energy, back-up and emergency power applications

Using state-of-the-art technology, the Samlex EVO™ inverter/charger operates at 165 million instructions per second with lightening fast load & response times, has 9 points of physical protection monitoring (being scanned up to 10,000 times per second) to detect fault conditions & protect itself in a vast range of adverse environments

The EVO-3012 is a 3000 Watt Pure Sine inverter, 12 VDC input, 120 VAC output, 50/60 Hz. It intelligently integrates a 130 Amp 4 stage Battery Charger and a 70 Amp Transfer Relay into an advanced and affordable off-grid power solution

AC Inputs

• Two separate AC inputs – one for grid (priority #1), one for generator (priority #2), connect simultaneously, no need to reconfigure when different power sources are available
• Generator Input is specifically designed to have more tolerance for wave form distortion, prevents unnecessary “rejection of AC input and switch to inverter” by tolerating distorted wave forms that can be produced by gritty generators
• Each AC input is programmable for voltage and frequency. User determines what the min and max thresholds are to switch from Grid or Generator to Inverter
• Generator start can be initiated by “Status Relay” contact, can be programmed to activate when grid is lost

Solar Input

• Connect a solar charge controller directly to the EVO™ though the Battery Charger external DC Input, seamlessly integrates solar charging into the EVO’s power system
• ONLINE Mode can be used to prioritize Batteries/Inverter over the grid, ideal for those wishing to operate primarily on solar power (when the grid is available, but might be costly)

Battery Charger

• 3 or 4 stage charging with Equalization (must be manually initiated)
• Adaptive algorithm is used during Bulk to assess the condition of the battery. Subsequent stages are then based on the condition of the battery rather than pre-set time periods for Absorption and Float. Prevents unnecessary charging, extends the life of batteries
• Programmable – set battery voltage thresholds to initiate charging

Transfer Switch

• Zero transfer time when switching from Inverter to Grid. When grid comes on, the inverter synchronizes with the wave form and then transfers instantly at zero crossing
• ‹16ms transfer when going from Grid to Inverter. When grid is lost, the transfer relay switches to inverter at the correct place in the wave form, the transfer takes less than 16ms

Surge Capacity (Power Boost)

• The EVO™ has 3X surge power
• Additionally, the EVO™ has large power overload allowances available for long periods of time. Increased inverter capacity means you can size your inverter smaller to handle heavy surge loads, reducing costs

State-of-the-Art Technology

• The EVO™ operates at 165 million instructions per second producing lightning fast load and response times
• The EVO™ is practically indestructible. It has “Bullet-Proof Intelligence” in the form of 9 physical points of protection monitoring being scanned up to 10,000 times per second for adverse conditions. The EVO™ will detect fault conditions and initiate a healthy shutdown before any product damage can be done.
• The E

Provides 1800 watts of sine wave AC power from a DC source

Offering superior quality true sine wave output, the Prosine 1800 stand-alone inverter is ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recreational and industrial applications, their 120-volt, 60 Hz AC power output is capable of handling both heavy duty and smaller, multiple AC loads. Prosine inverters include a backlit LCD display panel, which can be mounted remotely.

Product Features

• 1800 watt inverters (2900 watt surge capability)
  
• True sine wave AC output (crystal controlled)
  
• Removable LCD display can be mounted remotely for control and monitoring
  
• Unique DC terminals offer 180-degree connections for easy installation in tight places
  
• Powersave mode draws only 1.5 watts under no load
  
• Two year warranty

Protection Features

• Over temperature shutdown and automatic overload protection
  
• Over voltage and under voltage protection
  
• Short circuit and AC backfeed protection

With less than 3% total harmonic distortion, Prosine 1000 and 1800 inverters deliver true sine wave output that is identical to AC power supplied by your utility. This clean output makes Prosine inverters ideal for handling sensitive loads and improves AC equipment performance. Expect trouble-free true sine wave electricity for televisions, audio systems, variable speed tools, and more.

Light and compact

Prosine inverters are lighter and more compact than other inverters with similar power ratings because they use high-frequency switching technology in the power conversion process.

WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Freedom HF 1800

Compact inverter/charger to power the comforts of home on your boat, RV, or truck

With modified sine wave output, Freedom HF 1800 inverter/charger is designed to run entertainment systems and small appliances in smaller boats, RV's and trucks. The Freedom HF inverter/charger is the smallest, lightest, and least expensive model in the Xantrex lineup.

Freedom HF is designed for demanding marine and RV conditions. Temperature-controlled multistage charging ensures that your batteries are recharged safely and efficiently. Both models include an automatic transfer switch and a detachable digital remote control panel display that provides precise system information and can be mounted wherever you require the information.

Product Features:

• Designed to power loads such as microwave ovens, TVs, DVD players, small appliances and other electronic equipment
  
• Removable digital display to provide system status
  
• Automatic three-stage battery charger
  
• Designed to be hardwired using a terminal strip, or by connecting AC through GFIC receptacles (Included)
  
• Built-in 30-amp relay to automatically transfer between inverter power and incoming AC utility power

Protection Features:

• Battery over-voltage and under-voltage protection
  
• Over-temperature shutdown
  
• Automatic overload protection
  
• Short-circuit protection
  
• Ground-fault protection
  
• ETL listed for use in mobile RV and marine applications

WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

PDUMH32HV horizontal 2U metered rack PDU supports 32A maximum capacity at 230V. Includes 12 ft / 3.6m attached line cord with Blue IEC-309 32A input plug and 18 output receptacles (16 C13 2 C19). Outlets are arranged in two separately breakered 9 outlet load banks. Set of two visual current meters tracks the output current of each load bank separately. Supports 2U rackmount installation in 19 inch racks. Included cord retention brackets keeps vital network equipment plugged in and continuously powered. Tripp Lite Metered Power Distribution Units give IT Managers the ability to monitor network power consumption levels to prevent mains generator UPS or PDU overloads and to ensure proper load balance in complex redundant power applications. Built-in easy to read two-character LED display offers continuous PDU current monitoring data in one-amp increments. Switch-free unfiltered electrical pass-through reliably distributes UPS or generator power to multiple servers and vital networking equipment in rack enclosures network closets and more. Included mounting brackets support horizontal installation in 19 inch racks or other surfaces such as under-counter or wallmount configurations. Key Features 230V 32A metered Power Distribution Unit (PDU) in 2U horizontal rackmount form factor 32A maximum capacity Attached Blue IEC-309 32A input plug with 12 ft. / 3.6m line cord 18 total output receptacles (16 C13 2 C19) Outlets are arranged in two separately breakered and metered 16A load banks (each with 8 C13 and 1 C19 outlet) Current meters offer the ability to visually monitor power consumption levels to prevent mains generator UPS or PDU overloads and to ensure proper load balance in complex redundant power applications Pair of easy to read two-character LED displays offer continuous PDU current monitoring data in one-amp increments for each metered load bank Circuit breakers offer protection from overloads and short circuit fault conditions Switch-free unfiltered electrical pass-through reliably distributes UPS or generator power to critical networking equipment Cord retention brackets keep vital equipment plugs connected Typical Applications Ideal for network configurations requiring a metered PDU Package Includes 2U metered PDU Mounting brackets Plug retention brackets User manual This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Tripp Lite's APSRM4 provides remote monitoring and control of select Tripp Lite PowerVerterInverters (PV series) and Inverter/Chargers (RV APS and EMS series) which feature an RJ-style connector. The remote module's compact housing includes a switch (which controls the operation of the connected Inverter or Inverter/Charger) as well as two sets of intuitive "traffic light" LEDS. LEDs indicate approximate battery charge and load level when used with an Inverter. LEDs indicate appropriate battery charge or charge rate (depending on switch position) and operational status. Alternate LED labeling is provided. The module also includes mounting slots/holes for multiple mounting options (with user-supplied screws) including behind or below a dashboard or compartment. An attractive face plate is included for additional front-panel mounting options for RV marine or vehicular detailing. A daisy-chain port links the module to an Inverter or Inverter/Charger with an included 50-ft. cord. The port also allows multiple modules (sold separately) to connect together to control a single Inverter or Inverter/Charger. A Master Override Port enables automatic override of the Remote Control Module to shut off the connected Inverter or Inverter/Charger under various safety/operational conditions: * Ignition ON (prevents TV or other distractions while driving)* Ignition OFF (prevents inadvertent battery drain while parked)*Battery Disconnect (ensures safe shutoff when 12V electrical system is disconnected separately)* Water Encroachment (reduces shock hazard in marine applications). Key Features Provides complete remote monitoring and control of Tripp Lite PowerVerter Inverters (PV series) and Inverter/Chargers (RV APS and EMS series) which feature an RJ-style connector Intuitive "traffic light" LEDs display a variety of operational information Versatile durable all-metal remote module allows front panel rear panel or below dash mounting Attractive face plate for additional front-panel mounting options for RV marine or vehicular detailing Daisy-chain capability allows additional remote modules (sold separately) to control a single Inverter or Inverter/Charger Extra long 50-ft. remote cord allows you to locate remote module virtually anywhere within your vehicle or boat Master Override Port and included 25-ft. cable enable automatic override of the Remote Control Module to shut off the connected Inverter or Inverter/Charger under various safety/operational conditions Typical Applications Ideal for remote monitoring and control of select Tripp Lite PowerVerter Inverters (PV series) and Inverter/Chargers (RV APS and EMS series) which feature an RJ style connector. Package Includes APSRM4 Remote Control Module Face Plate 50-ft. Remote Control Cord 25-ft. Master Override Cord LED labels and Instruction Manual with Warranty Information This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

1500W Pure Sine Wave Inverter - 24V

PST Series (120 VAC)

This high efficiency DC-AC inverter converts 12 Volts DC to 1500 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with pin-type battery cable lugs or can be hard-wired. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 1 Amp. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.

Features:

• High efficiency
• Can be hard wired
• Temperature controlled cooling fan – reduces energy consumption
• Low interference
• Wide operating DC input range: 21.4 - 33.0 VDC
• Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up
• UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
• Low idle power draw
• Dual GFCI protected AC outlets
• Optional remote control (sold separately): Model RC-200
• Safety certified to UL standards, FCC compliant

Specifications:

• Input: 24 VDC
• Output: 120 VAC
• Watts: 1500
• Surge: 3000 Watts
• Remote Control: RC-200 sold separately
• Weight: 15.6 (lbs)
• Weight: 7.1 (kg)
• Dimensions: 10.35 x 18.43 x 4.16 (in)
• Dimensions: 263 x 468.2 x 105.6 (mm)
• Safety: ETL to UL Standards
• Warranty: 2 Year Limited

Applications:

• Service vehicles
• Mobile Offices
• Boats
• Recreation Vehicles, Camping
• Telecommunication
• Field work / Construction sites
• Solar power systems
• Emergency backup power
• Home electronics: TV, VCR, video games
• Computers, printers

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.