• At-a-glance testing of batteries, on-board charger, alternator / regulator output
  
• 6 Easy to read LED Indicators
  
• Compact lightweight design

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Corrosion Test Meter - Half Cell (AG/AGCL) - 20'

Features:

• Half Cell (AG/AGCL)
• Length: 20'
• Color: Red
• RoHS Compliant (Restriction of Hazardous Substances Directive): Contact Compliance

Cat III Autoranging Digital Multimeter with Temperature Probe - This Autoranging AC DC Digital Multimeter includes a temp probe.

Cat III Autoranging Digital Multimeter with Temperature Probe features include:

• Autoranging AC DC Digital Multimeter is designed to international safety standard IEC61010-1 CAT III 600V
• Secondary injection molded case - Santoprene is overmolded on the outer surface for comfort
• Maximum value measurement
• Back light
• Auto Power off
• Auto range
• Data hold
• Continuity Test
• Diode Test
• Transistor hFE test
• Display: 1999 counts, digit is .63” high
• DC Voltage: 200m/2/20/200/600V±0.7%
• AC Voltage: 200m/2/20/200/600V±0.8%
• DC Current: 200µ/2000µ/20m/200mA±1.2%, 2/10A ±2.0%
• AC Current: 200µ/2000µ/20m/200mA ±1.5%, 2/10A ±3.0%
• DC Current: (with clamp, optional) :200/2000A (0.1mV/0.1A) ±1.2%
• AC Current: (with clamp, optional) :200/2000A (0.1mV/0.1A) ±1.5%
• Resistance: 200 / 2k/ 20k / 200k/2M/20M ±1.2%
• Temperature: 0°F to 1800°F (-20°C to 1000°C) ±3.0%
• Battery Test:
  • 1.5V (test current approx 60mA)
  • 3V (test current approx 30mA)
  • 9V(test current approx 12mA)
• Power: 1.5V (AAA) x 3
• Autoranging AC DC Digital Multimeter Size: 6.2" X 2.9" X 1.2”
• Weight Approx. 7.7oz.
• Order Qty of 1 = 1 Piece

Below is more info on our Cat III Autoranging Digital Multimeter with Temperature Probe

Battery, Bulb, Fuse, Continuity Tester - A multi-use Electrical Continuity Tester for electrical applications.

Battery, Bulb, Fuse, Continuity Tester features include:

• Multi-purpose Battery, Bulb, Fuse, and Continuity tester
• Determines if Battery, Bulb or Fuse is still good
• Audible continuity tester via test probes supplied
• Reading shows up on clear scale
• Operated by one 9V 6F22 battery (not included)
• Automatically turns power on and off
• Dimensions: 5.7” x 2.6” x 1.3”
• Tester Weight: 5oz
• Order Qty of 1 = 1 Piece

Below is more info on our Battery, Bulb, Fuse, Continuity Tester

Digital Multimeter & Temperature Probe with Rubber Holster - A Digital Multimeter with probe and holster.

Digital Multimeter & Temperature Probe with Rubber Holster features include:

• AC Voltage: 200/600V+/-1.2%
• DC Voltage: 200m/2/20/200V+/-0.5%, 600V+/-0.8%
• DC Current: 2m/20m/200mA+/-1%, 10A+/-3%
• Digital Multimeter Resistance: 200/2K/20K/200K/2M+/-0.8%
• Temperature: 1°F to 752°F (-17°C to 400°C) +/- 1%, 754°F to 1382°F (401°C to 750° C) +/-2%
• Diode Test
• Audible Continuity Test
• Data Hold
• Overload Protection
• Power Source: (1) 9v Battery
• Fuse 200mA/250V
• IEC 61010-1 CAT II 600V
• Digital Multimeter Dimensions: 1.25” X 2.72” X 5.44”
• Weight: 9 oz.
• Accessories: Rubber Holster, Test Leads, Battery & Instruction Manual
• Blister Packed
• cETLus Listed
• Order Qty of 1 = 1 Piece

Below is more info on our Digital Multimeter & Temperature Probe with Rubber Holster

Receptacle Tester - Easy to use Electrical Receptacle Tester.

Receptacle Tester features include:

• Electrical Receptacle Tester Instantly Displays Wiring Condition of Any Standard 3-Wire AC 110-120 Outlet
• Neon Indicators Give Positive Indication of Current Status
• Compact Unit Simply Plugs into any Standard 3 Wire/Grounded Receptacle (110–125 Volt AC Circuits)
• Tests for 6 Circuit Conditions: Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse & Correct Wiring
• Blister Packed
• cULus Listed
• Order Qty of 1 = 1 Piece

Below is more info on our Receptacle Tester

Non-Contact Power Detector 70-440 Volts AC - A great multi-purpose Non Contact Voltage Tester for various applications.

Non-Contact Power Detector 70-440 Volts AC features include:

• Non-Contact Voltage Tester Means No Direct Electrical Contact & No Current Flow Needed
• Sound & Light Indication of Voltage
• Tests Electrical Lines, Cables, Sockets, Fuses, Switches & More
• Checks for Proper Ground Connection
• Unique Electronic Sensor Locates Breaks Along Live, Insulated Wires & Power Cords
• Distinguishes Polarity
• Detects Leaks in Underground Devices
• cETLus Listed
• Order Qty of 1 = 1 Piece

Below is more info on our Non-Contact Power Detector 70-440 Volts AC

Cat III Autoranging 400A AC Slimline Clamp Meter - A quality Slimline Electric Clamp Meter.

Cat III Autoranging 400A AC Slimline Clamp Meter features include:

• Voltage DC 600V with basic accuracy ±(0.5%+5d)
• Voltage AC 600V with basic accuracy ±(0.8%+5d)
• Current AC 400V with basic accuracy ±(2.50%+6d)
• Slimline Electric Clamp Meter Resistance 20M ohms with basic accuracy ±(1.0%+4d)
• Continuity buzzer sound at 300 ohms
• Diode test current 0.3mA; Open circuit voltage 1.5V
• Accessories: test leads, carrying case, 2(AAA) 1.5V batteries
• Size:8-1/16"L x 2-3/4"W x 1-1/2"H
• Slimline Electric Clamp Meter Weight: 7oz.
• 2000 LCD display counts
• Decimal Point Readings
• Display with backlight
• Data hold
• Max hold
• Auto power off
• Low battery indication
• Order Qty of 1 = 1 Piece

Below is more info on our Cat III Autoranging 400A AC Slimline Clamp Meter

Cat III TRMS Autoranging Digital Multimeter with PC Interface - Molded Cat III Digital Multimeter for comfort.

Cat III TRMS Autoranging Digital Multimeter with PC Interface features include:

• RS232 Standard interface
• Cat III Digital Multimeter has Secondary injection molded case - Santoprene is overmolded on the outer surface for comfort
• Continuity Test
• Diode Test
• Display 3999 counts
• Relative measurement
• Auto power off
• Date hold
• Auto range and manual range
• Back light
• True RMS value
• AC Voltage: 4V/40V/400V ±0.8%, 700V±1.2%
• DC Current: 400µ A/ 4000µ A/ 40mA / 400mA±1.2%, 10A ±2.0%
• AC Current: 400µ / 4000µ / 40m / 400mA ±1.5%, 10A ±3.0%
• Resistance: 400 / 4k/ 40k / 400k/4M ±1.0%, 40M ±2.0%
• Capacitance: 50nF ±5.0% 500nF/5µF/50µF 100µF ±3.0%
• Cat III Digital Multimeter Frequency: 5Hz/50Hz/500Hz/5KHz/±0.2%
• Temperature: 4°F to 1832°F (-20°C to 1000°C)
• Duty: 0.1% ~ 99.99%
• Order Qty of 1 = 1 Piece

Below is more info on our Cat III TRMS Autoranging Digital Multimeter with PC Interface

Cat III 1000A Digital Clamp Meter with Temperature Probe - Heavy duty 1000A Clamp Current Meter.

Cat III 1000A Digital Clamp Meter with Temperature Probe features include:

• Conforms to IEC61010-1 Cat III
• Display: (3) 1/2" Digit LCD, Max. 1999 counts
• Data hold function
• Back light function
• DC voltage: 1000V ±1.0%
• AC voltage: 750V ±1.0%
• AC current: 20A/200A/1000A ±2.0%
• 1000A Clamp Current Meter Resistance: 200/2000 ohms ±1.0%
• Temperature Range: -40°F to 1350°F (-40°C to 732°C) ±1.0%
• Fast Continuity Beeper
• Diode Test
• 1000A Clamp Current Meter Jaw Opening to 1.66” max.
• Order Qty of 1 = 1 Piece

Below is more info on our Cat III 1000A Digital Clamp Meter with Temperature Probe

Tone Generator and Probe - Multipurpose Wire Tone Generator.

Tone Generator and Probe features include:

• Identifies the state of the working telephone line (clear, ring, busy) within a group
• Designed to identify and trace wires or cables without damaging insulation
• Identifies polarity of a telephone line
• Trace & identify wires in a bundle, at a cross-connect point or remote end
• Can identify split pairs when one wire from a pair has been terminated
• Used to send or trace a tone
• Use on twisted pair wiring (telecom/datacom), single conductors, coaxial cables, de-energized AC wiring, & most other wiring
• The probe identifies the signal from the tone generator through drywall, wood & other non-metallic materials
• Continuity test
• Adjustable sensitivity/volume control to increase accuracy
• Recessed On/Off button prevents battery drain.
• Send tone frequency: 1.5KHz, Receives frequency range: 100~300 KHz
• Size: receiver 9.4" x 1.7" x 1”, emitter 5.7" x 1.4" x 1”
• Power: 6F22(9V)x1
• Order Qty of 1 = 1 Piece

Below is more info on our Tone Generator and Probe