PIRANHA™ Livewell 800 Pump - 12 VDC, 800 GPH

Smart. Reliable. Attractive. Efficient. All PIRANHA series livewell pumps have a removable cartridge for easy cleaning. Anti-airlock feature allows the pump to clear trapped air in rough water or when the boat is anchored. The dual port fitting allows for easy washdown pump connections. Everything you are looking for in a livewell pump!

Features:

• Removable Cartridge
  
• Tough Nylon Housing
  
• Washdown Port Built-in
  
• Anti-Airlock
  
• Ignition Protected
  
• ISO 8846
  
• 2 Year Warranty
  
• CE Listed
  
• Tinned 6' Wire Assembly

PRO BLASTER™ II Washdown Pump Deluxe - 12 VDC, 4.0 GPM

SHURFLO's PRO BLASTER II washdown pump delivers superior performance that customers have come to expect and rely upon. Whether it's blasting away the grimiest decks clean, fish box scaling and anchor chain cleaning, SHURFLO's PRO BLASTER II washdown pump delivers high performance that provides a powerful consistent spray pattern. Built to withstand the marine environment with electro-coated motor, O-ring seals, fully sealed wire entries and can run dry without damage. Inlet strainer, 1/2" hose barb fittings and nozzle included. Ignition protected. Thermally protected.

Features:

• 4901 Replacement
  
• Sealed Switch
  
• Sealed Motor
  
• Corrosion Resistant Electro
  
• Coated Motor
  
• Independent Chambers
  
• Built-In Check Valve
  
• Co-Molded Diaphragm
  
• Self-Priming up to 6 Feet
  
• Dry Run Capability
  
• Thermally Protected
  
• Ignition Protected, CE

PIRANHA™ Ballast 800 Pump - 12 VDC, 800 GPH

Everything you are looking for in a ballast pump. Our tough, high density nylon housing and heavy duty water cooled motor give the PIRANHA ballast pumps unparalleled reliability. Anti airlock feature allows the pump to clear trapped air. All ballast series pumps have a removable cartridge for easy cleaning and ease of replacement.

Features:

• Flow Rate 800 GPH
  
• Replaceable Cartridge
  
• Tough Nylon Construction
  
• Anti-Air Lock Feature
  
• Tinned 6 Feet Wire Assembly
  
• CE, Ignition Protected ISO 8846

PRO BLASTER™ II Washdown Pump Ultimate - 12 VDC - 5.0 GPM

SHURFLO's PRO BLASTER II washdown pump delivers superior performance that customers have come to expect and rely upon. Whether it's blasting away the grimiest decks clean, fish box scaling and anchor chain cleaning, SHURFLO's PRO BLASTER II washdown pump delivers high performance that provide a powerful consistent spray pattern. Built to withstand the marine environment with electro-coated motor, O-ring seals, fully sealed wire entries and can run dry without damage. Inlet strainer, 1/2" hose barb fittings and nozzle included. Ignition protected. Thermally protected.

Features:

• 5901 Replacement
  
• Sealed Switch
  
• Sealed Motor
  
• Corrosion Resistant Electro
  
• Independent Chambers
  
• Built-In Check Valve
  
• Co-Molded Diaphragm
  
• Self-Priming up to 6 Feet
  
• Dry Run Capability
  
• Thermally Protected
  
• Ignition Protected, CE

Multiple Port Shower Sump 12v
This compact shower sump system is designed to meet the higher demands from today's boating industry where more equipment is used. This also includes the fresh water system onboard and involves showers, dish-washing machines, galley sinks, etc. The shower sump turns on/off automatically using our Ultima switch technology and has multiple inlet ports for handling waste water from more than one tapping point. The check valve on the outlet stops water from flowing back into the tank. The tank has a tight-fitting lid to minimize splashing and odors. To further aid in cleaning, the system includes an easily removable mesh filter.
CE-Approved

Features:

• Includes the L650 Duo pump and a mesh filter for easy cleaning
  
• Multiple inlet ports
  
• Handles waste water from more than one tapping point
  
• Tight fitting lid to mimimize splashing and odors
  
• Check valve on outlet
  
• Capacity 1.0 m head (13.6 V/27 V): 53 l/min - 844 GPH
  
• Capacity straight (13.6 V/27 V):61 l/min - 972 GPH
  
• Amperage: 3.4 A
  
• Fuse Size: 5 A
  
• Pump Body: Thermoplastic
  
• Shaft Seal: Lip seal
  
• Voltage: 12 V DC
  
• Intake Hoses: 1x3/4", 1x3/4" or 1x1"
  
• Discharge Hose: 3/4"

High Flow Livewell 1500 Pump - 12 VDC, 1500 GPH

Heavy duty and built to last. SHURFLO 1500 GPH livewell pump is built to withstand the harsh marine environment. Submersible and rated for continuous duty, SHURFLO's bilge pump is equipped with an anti-airlock feature to ensure optimal performance and is constructed with a high density nylon housing. Engineered with the finest components that continue to improve SHURFLO's high quality standard, the SHURFLO bilge pumps' performance and product reliability are unmatched.
Features:

• Tough Nylon Construction
  
• Patented Water Cooled Motor
  
• Extended Motor Life
  
• 6' Tinned Wire
  
• Washdown Port
  
• Submersible
  
• Anti-Airlock
  
• ISO 8846/8849
  
• 2 Year Warranty
  
• CE Listed

Porta Quick Oil Changer

The Porta-Quick Portable Oil Changer makes quick, clean and easy oil changes on-board any boat, because it uses the vessel's own power supply to operate the powerful oil reservoir mounted flexible impeller pump.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

PIRANHA™ Livewell 600 Pump - 12 VDC, 600 GPH

Smart. Reliable. Attractive. Efficient. All PIRANHA series livewell pumps have a removable cartridge for easy cleaning. Anti-airlock feature allows the pump to clear trapped air in rough water or when the boat is anchored. The dual port fitting allows for easy washdown pump connections. Everything you are looking for in a livewell pump!

Features:

• Removable Cartridge
  
• Tough Nylon Housing
  
• Washdown Port Built-in
  
• Anti-Airlock
  
• Ignition Protected
  
• ISO 8846
  
• 2 Year Warranty
  
• CE Listed
  
• Tinned 6' Wire Assembly

Oil Change Pump w/3.5 Gallon Bucket - 12 VDC, 1.5 GPM

Incorporating SHURFLO's advanced motor technology that includes thermal overload protection, general utility pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer. 1 Year Warranty.

Features:

• 12 VDC
  
• 8' [2.4 m] Cable w/ Battery Clips
  
• CE
  
• Hose kit
  
• 3.5 Gal [13L] Storage Container
  
• Uses: Oil changing, winterizing and liquid transfer

Talulah High Flow Ballast Pump - 30 GPM - 12V

With an extraordinary 30GPM rating, the Johnson Pump Talulah HighFlow Ballast Pump represents the industry gold standard of high speed, reliable and efficient reversible ballast pumps. Built with ball bearings, a solid bronze pump head, and built-in thermal protection, this ballast pump is exceptionally durable and built to last. The compact size allows for flexibility in system design without using valuable storage space and without sacrificing the versatile high volume connections unique to the design of the pump head. The Talulah HF also offers run dry protection, the integrated Run-Dry Protection circuit monitors the current draw of the pump and automatically shuts it off if conditions indicate water is no longer flowing through the pump. This innovative feature can help minimize any damage to the new neoprene orange impeller, which itself delivers faster fill/drain times and is more reliable than the previous models. In addition, the ignition protected design makes this pump suitable for installation in the bilge compartment of the boat without risk of fire or explosion due to fuel vapors. Whether for use in a new automated ballast system installation or to upgrade the pumps in an existing system for faster fill and drain times, the Talulah HF 30GPM Ballast Pump delivers the next generation of pump performance in the wakeboarding world.

Features:

• Built in Thermal Overheat Protection: Automatic reset after cooling down
• Monitor Filling: Tanks must have overfill protection
• Retrofit Possible: Important to have full bore hoses – without restriction
• Dry Run Impeller*
• Intermittent Duty
• Important to have good electric installation and proper wire size (Acc. to ISO 10133)
• Recommend fresh batteries and engine running (alternator running) to ensure power supply

*Dry Run

SHURFLO Electric Faucet & Pump Combo - 12 VDC, 1.0 GPM

Smooth, easy flow. Exceptional durability. Trouble-free, ceramic disc, washerless design. Versatile 360 degree spout rotation. Designed for ease-of-use with a pump or city water system.

Features:

Sliding Ceramic Plate Valve

• Two ceramic disk plates that slide on each other. Ultra strong ceramics insure reliability and long life, as well as water flow from a trickle to a steady stream.
  UL Approved
  
• Stringent toxicity, performance, and life testing.
  Simple Installation
  
• Complete with mounting hardware. Only 1 hole necessary for mounting
  360° Rotation in 3 directions
  
• Rotating spout allows a variety of uses. Cold only. Hot/Cold does not rotate down.
  Multiple Installation Possibilities
  
• Use with or without an electric pump. Mounts in any position.
  High Operating Temperatures
  
• Up to 176°F (80° C)
  High Operating Pressures
  
• Up to 87 PSI (6 Bar)
  Rugged ABS Plastic Design
  
• Built to withstand the real world
  Easy Operation
  
• "Twist-Of-The-Wrist" switch and valve operation
  Smooth Futuristic Design
  
• Sleek design

Utility Pump

The 6050-Series pumps are the highest capacity, self-priming, portable Utility Pumps offered by Jabsco

• Bronze pump head
  
• 23 GPM output at 10ft total head
  
• Continuous duty motor with thermal over-load protection
  
• Motor wired to operate with 115v and can be converted to 230v
  
• Open drip proof motor
  
• 8' power cord with grounded plug
  
• convenient carrying handle

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flat Tank Oil Changer System

The Jabsco Flat Tank Oil Changer System simplifies the engine oil changing process, ideal for changing engine oil in Boats, RV's, Lawn and Garden Equipment.
There is no need to worry about open containers causing spills when changing engine oils with the 3-1/2 Gallon (13LTR) compact self-contained unit fitted with a self-priming diaphragm pump with an easy pour spout for emptying.
The Flat Tank design allows for easy storage in deck boxes, boat storage lockers, or RV storage compartments. Easy to use, clean and efficient dipstick suction tube, battery clamp wire leads, an on-off pump switch.

Features:

• Stores easily
  
• Compact robust tank design
  
• Easy pour spout with screw on cap
  
• Easy to carry handle
  
• 3-1/2 gallon (13ltr) sealed container
  
• Self-priming, run dry pump

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Engine Oil Changer Oil Drain Pump

Polished brass hand pump connects directly to engine oil dipstick tube on many popular marine engines such as OMC and Mercruiser.

Features:

• Screws onto threaded male 3/4" garden hose (GHT) fitting on top of dipstick tube.
• Gives simple "one-hand" pumping
• Complete with 2ft of 1/2" ID drain hose

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Drill Pump - 200 GPH

Incorporating SHURFLO's advanced motor technology that includes thermal overload protection, general utility pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer. 1 Year Warranty.

Features:

• 1/4" [6mm] Drill Shaft
  
• Flexible BUNA Impeller
  
• 8' [2.4m] Prime
  
• Uses: Oil Change and Liquid Transfers/LI>

Livewell Fill Valve w/ 3/4" & 1-1/8" Fittings

The fill valve you've been waiting for! The SHURFLO livewell fill valve is the only full port, adjustable, low profile fill valve which creates an energized environment for ultimate bait performance. Made of tough high density nylon, the SHURFLO livewell fill valve is adjustable to reach any desired flow rate.

Features:

• Adjustable Flow Valve
• 3/4" and 1-1/8" Full Port Fittings Included
• Low Profile Design
• Nylon Construction
• CE Listed

High Flow Livewell 2000 Pump - 12 VDC, 2000 GPH

Heavy duty and built to last. SHURFLO 2000 GPH livewell pump is built to withstand the harsh marine environment. Submersible and rated for continuous duty, SHURFLO's bilge pump is equipped with an anti-airlock feature to ensure optimal performance and is constructed with a high density nylon housing. Engineered with the finest components that continue to improve SHURFLO's high quality standard, the SHURFLO bilge pumps' performance and product reliability are unmatched.
Features:

• Tough Nylon Construction
  
• Patented Water Cooled Motor
  
• Extended Motor Life
  
• 6' Tinned Wire
  
• Washdown Port
  
• Submersible
  
• Anti-Airlock
  
• ISO 8846/8849
  
• 2 Year Warranty
  
• CE Listed

Talulah Ballast Pump - 13.5 GPM - 12V

Features:

• Built in Thermal Overheat Protection: Automatic reset after cooling down
• Monitor Filling: Tanks must have overfill protection
• Retrofit Possible: Important to have full bore hoses – without restriction
• Dry Run Impeller*
• Intermittent Duty
• Important to have good electric installation and proper wire size (Acc. to ISO 10133)
• Recommend fresh batteries and engine running (alternator running) to ensure power supply

*Dry Run

Drill Pumps

Jabsco drill pumps provide a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" chuck can be operated. They provide easy powered pumping almost anywhere a hand utility pump might be used.

• Pumps up to 3.5 gpm
  
• Self-priming to 3ft
  
• 1/4" diameter shaft
  
• Supplied with 3/4" garden hose thread port adapters

WARNING: This product can expose you to chemicals including COBALT METAL POWDER which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

"FC" Tournament Series™ Removable Motor Cartridge

For Thru-Hull Applications Straight 3/4" Pickup Tube

These new pumps are built on Rule's unsurpassed quality and leadership in pump design and technology. The innovative design includes many new and exciting features including a quick, on hand "push button" motor cartridge removal system, rotatable base that allows you to position the discharge nozzle at any location and treaded nylon hose barb attachments which allow for various hose mounting options. Other features include a built-in dual port option, water-cooled housing, and positive snap motor cartridge locking mechanism.

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Sliding Vane Self-Priming Diesel Transfer Pump - 9 GPM & 24v

Designed for refueling small sizes diesel powered vehicles [typical tank sizes up to 200 litres (50 U.S. gallons)] from drums.

Suitable for mounting to the following equipment: Excavators, Cranes, Road rollers (compactors), Pavers, Agricultural machines, Generators, Helicopters.

Suitable for diesel fuel, Kerosene, Paraffin, Hydraulic oils, Oils up to 150 centi Stokes (750 Saybolt Universal) viscosity. .

Features:

• Faster refueling - 35 litres/minute (9.5 U.S.GPM).
• High head capability - 6 meters (19 feet).
• Self priming up to 2.8 meters (9 feet).
• Vibration tested. • IP55 protected motor 

Specifications:

• Temperature Range : -30°C to +40°C (-22°F to +104°F) 
• Pump Body : Aluminium 
• Rotor : Vectra 
• Vanes : PTFE Filled Ryton 
• Shaft : Steel 
• Seal : Nitrile 
• Lip Seal Ports : Vertical ½¨ BSP or 19mm hose adaptors (¾¨) 
• Motor : 24V permanent magnet, corrosion resistant IP55 protected 
• Duty : 25 mins @ +40°C (104°F)
• Current Draw: 7 Amps @ 3m head
• Maximum Current: 10 Amps

Shower Drain Box with 1100 GPH Pump - 12V

This compact, full-capacity shower drain system provides 1100 GPH (4164 LPH) of output. Activated by a float switch, it turns on as the tank fills and shuts off when it’s empty. It has three inlet ports that offer varying combinations for the inlet hose, as well as a quick-release tank lid and an easy-clean internal strainer.

Shower Drain Box with 1100 GPH Pump - 24V

This compact, full-capacity shower drain system provides 1100 GPH (4164 LPH) of output. Activated by a float switch, it turns on as the tank fills and shuts off when it’s empty. It has three inlet ports that offer varying combinations for the inlet hose, as well as a quick-release tank lid and an easy-clean internal strainer.

Standard Flow Marine Ballast Pump - 12 GPM & 12 VDC - Bronze Housing

The Shurflo Standard Ballast Pump was specially designed and developed for high capacity ballast tank applications in ski and wake boats, providing rapid fill and drain rates in a readily adaptable configuration, able to operate on a 25 Amp circuit. The high efficiency, high torque motor in combination with a high modulus neoprene compound impeller provide fast priming, long life, and consistent performance. Close internal tolerances help reduce leak back when the pump is mounted below the ballast tank. The Standard Ballast is built on the latest Shurflo motor series which includes fully sealed heavy die cast end bells, electro-coat finish throughout, and a steel mounting plate for reliable performance and durability in engine compartment conditions.

Features:

• 2 VDC Sealed Corrosion Resistant Electro-Coated Motor
• 14 AWG Lead Wires
• Reversible Flexible Impeller
• Bronze Pump Body
• Self-Primes up to 4 feet vertically
• Ports: ½” Internal Pipe Threads,
• 1” External Hose Barb
• Ignition Protected
• CE and IMCI certification

Pump Design:

• Type: Reversible Flexible Impeller
• Ports: ½” Internal Pipe Threads, 1” External Hose Barb
• Liquid: 200°F [93°C] Max
• Prime: 4 Feet [1.2 M]
• Run Dry: Not Recommended

Electrical:

• Motor: 12V DC Permanent Magnet,
• Intermittent Duty
• Protection: Need External Fuse (not supplied)
• Leads (Red): 14.5” [0.36M] Tinned 14 AWG
• Leads (Black): 12.5” [0.31M] Tinned 14 AWG
• Fuse: 25 Amp Fuse Recommended
• Control: No Control – External Switch required

Materials:

• Housings: Bronze
• Impeller: Neoprene
• Hardware: Brass/Stainless

Agency Approvals:

• USCG Electrical Standards 183.410
• ISO 8846 Marine for IGNITION PROTECTION on gasoline power vessels
• CE and IMCI certification

Shower Drain Box with 800 GPH Pump - 12V

This compact, full-capacity shower drain system provides 800 GPH (3028 LPH) of output. Activated by a float switch, it turns on as the tank fills and shuts off when it’s empty. It has three inlet ports that offer varying combinations for the inlet hose, as well as a quick-release tank lid and an easy-clean internal strainer.

Twinport Aerator Pump - 500 GPH - 12V

Twinport cartridge aerator pump 12V with flowrate 32l/min (500GPH). The twinport makes it possible to use the same intake 19mm (3/4″) for both the livewell and wash down pump.

Equipped with both straight and elbow 19mm (3/4″) detachable ports. Amperage 1,8A, fuse size 5A.

Standard Utility Pump - 12 VDC, 1.5 GPM

Incorporating SHURFLO's advanced motor technology that includes thermal overload protection, the general purpose pumps are self-priming, easy to install and are extremely versatile.

Features:

• 12 VDC
• Ignition Protected
• BUNA Valves
  
• CE
  
• 7' [2.1m] Prime
  
• Hose kit Included
  
• Uses: Winterizing, Oil Change and Liquid Transfers

Sliding Vane Self-Priming Diesel Transfer Pump - 9 GPM & 12V

Designed for refuelling small sizes diesel powered vehicles [typical tank sizes up to 200 litres (50 U.S. gallons)] from drums.

Suitable for mounting to the following equipment: Excavators, Cranes, Road rollers (compactors), Pavers, Agricultural machines, Generators, Helicopters.

Suitable for diesel fuel, Kerosene, Paraffin, Hydraulic oils, Oils up to 150 centi Stokes (750 Saybolt Universal) viscosity. .

Features:

• Faster refuelling - 35 litres/minute (9.5 U.S.GPM).
• High head capability - 6 metres (19 feet).
• Self priming up to 2.8 metres (9 feet).
• Vibration tested. • IP55 protected motor 

Specifications:

• Temperature Range : -30°C to +40°C (-22°F to +104°F) 
• Pump Body : Aluminium 
• Rotor : Vectra 
• Vanes : PTFE Filled Ryton 
• Shaft : Steel 
• Seal : Nitrile 
• Lip Seal Ports : Vertical ½¨ BSP or 19mm hose adaptors (¾¨) 
• Motor : 12V permanent magnet, corrosion resistant IP55 protected 
• Duty : 25 mins @ +40°C (104°F)
• Current Draw: 15 Amps @ 3m head
• Maximum Current: 20 Amps

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Shower Drain Box with 800 GPH Pump - 24V

This compact, full-capacity shower drain system provides 800 GPH (3028 LPH) of output. Activated by a float switch, it turns on as the tank fills and shuts off when it’s empty. It has three inlet ports that offer varying combinations for the inlet hose, as well as a quick-release tank lid and an easy-clean internal strainer.

Waste Water 43L (11.5 GPM) - 12V

Macerator Pump 12V equipped with rotary cutter and impeller to discharge waste water with high capacity.

Capacity 43 L/min (11,5 GMP) output at 4m total head. Self priming up to 3m vertical lift.

Brass and stainless steel internal parts and pump body in thermo polymer with a long lasting impeller. Inlet port 38mm (1,5″) and outlet 25mm (1″). 12A fuse. Interchangeable with Jabsco 18590-2092, Johnson Pump 10-24453-04.

Features:

• Weight: 1.98 kg/4 lbs
• Dimensions: 240/9.4L x 90/3.5H x 130/5W mm/in 
• Black Water
• CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

General Purpose Pump FIP F3 (9 GPM) - 12V

DC 12V F3 size FIP pump with capacity 35 L/min (9,3 GMP). Used for pumping water, oils and chemicals.

Pump body in brass, stainless steel shaft and high quality impeller.

Port connections 19mm (1/2″), self priming up to 3m vertical lift. Reversible flow direction, 8A fuse.

Interchangeable with Johnson Pump 10-24516-01.

Features:

• Weight: 0.8 kg/1 lb
• Dimensions: 160/6.3L x 90/3.5H x 120/4.7W mm/in 
• Reversible flow direction by changing polarity 
• CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance