PC-Rot Terminator is structural wood hardener designed to strengthen decayed or rotted wood. The mixture is a low viscosity liquid that penetrates porous surfaces filling and sealing voids with an epoxy that cures to a hard but durable component. PC-Rot Terminator is useful for replacement of missing wood fibers or wood resin. PC-Rot Terminator fills the voids in the wood with an elastomer that has strength greater than wood. PC-Rot Terminator acts as a binder that glues the wood fibers together. The wood fibers become much stronger in combination with the epoxy elastomer.
The PC Products PC-Rot Terminator is a two-part epoxy wood consolidant that hardens rotted wood and protects it against future damage from water and wear. Mixing the two parts forms a low-viscosity liquid that has a working time of 60 minutes, allowing time for saturation to fill and seal gaps in the wood grain. It can be can be primed, painted, or stained after it has been cured.
Specifications
Application temperature range | 35 to 115 degrees F |
Service temperature range | -20 to +200 degrees F |
Working time | 60 minutes (at 77 degrees F) |
Thin film set | 12 hours (at 77 degrees F) |
Full cure time | 1 week (at 77 degrees F) |
Mix ratio | 1 part hardener to 2 parts resin |
Protective Coating Company manufactures products to repair and restore various materials, including wood and concrete. The company, founded in 1954, is headquartered in Allentown, PA.
What's in the Box?
- 1.5 gal. PC-Rot Terminator in two bottles (one bottle of hardener and one bottle of resin)
- Applicator bottle
This product ships in approximately 1 days
This product is made in US