PC-Petrifier is a single component adhesive, formulated to fully penetrate and revitalize rotted wood.a Modern technology has allowed us to develop a water base wood consolidant that is environmentally friendly.a PC-Petrifier's low viscosity allows deep penetration into soft rotted wood fiber, restoring old wood to near structural integrity. aSeal and restore rotted soft wood fibers in window sills, sashes, frames, trim, decorative beams and columns, etc. PC-Petrifier can also be used to prepare old wood for priming and painting. Apply to exposed wood grain to protect from damage.a Not for structural repairs. If you have structural wood damage, please see our PC-Rot Terminator. aaDo not use in conjunction with PC-Wood Guardian0 or other Borate products.
The PC Products PC-Petrifier is a water-based wood hardener used to restore and strengthen soft or rotted wood in non-structural areas such as window sills, frames, trim, and decorative beams. The water-based hardener can also be used to prepare old wood for priming and painting, and helps seal wood from future damage. It has a thin consistency to deeply penetrate and saturate wood fiber.
Specifications
Continuous service temperature range | 33 to +200 degrees F |
Time until cured for service | 24 hours (dependent on temperature and porosity of wood being treated) |
Time until fully cured | 3 to 7 days (dependent on temperature and porosity of wood being treated) |
Color | Milky white |
Protective Coating Company manufactures products to repair and restore various materials, including wood and concrete. The company, founded in 1954, is headquartered in Allentown, PA.
This product ships in approximately 1 days
This product is made in US