Power Cable Assembly, 3.5 Meters
|
Power Cable Assembly, 3 Meters
|
Combination Power and Data Cable Assembly, 2 Meters
|
NMEA Cable, 1 x 7 Pin Connector, 5 Meters
Replaces Furuno Part # 000-144-418
|
10M NMEA2000 Backbone Cable for PB200
|
10 Meter Signal Cable Assembly
|
12kW Radar Gearbox f/FR8125 or FAR1513 Furuno 12kW Gearbox RSB0070-086A specifically for Furuno's FR8125 Radar or FAR1513 Radar.
|
12V-24V 7 Amp Converter for DRS12AX X-Class Open Array - Newmar Newmar 12-24-7 Step Up Dc-Dc Converter 7amp Conitnuos These "UP" converters produce 24 volts from 12 volt systems and are ideal for managing dual voltage applications on marine vessels without having to install a 24 volt battery and dedicated charging system. Choose from two types depending on your application: In the Standard, Non-Isolated Series the 12V input and 24V output share a common negative ground and are ideal when installing certain electronics that operate better on 24 volts when a robust 12 volt system exists. Models available in outputs of 7, 16 and 25 amps. Standard, Non-Isolated Series
Specifications:
Mechanical
|
12V-24V DC 16 Amp Converter f/DRS25AX X-Class Open Array - Newmar DC Converter 12V-24V 16 Amps
|
15M Signal Cable for FR8125 Furuno's Signal Cable specifically for the FR8125. Features:
|
165T-50/200-SS260 DFF3D Thru-Hull Combo Transducer Stainless Steel Combination Thru-Hull The 165T-50/200-SS260 includes the DFF3D elements along with 50/200 kHz elements and temperature and motion sensors. It can be connected to the DFF3D Multi-Beam Sonar along with one sounder. These transducers save money and space compared to purchasing and installing two separate transducers. Features:
|
165T-50/200-TM260 Transducer for DFF3D Transom Mount Combo Transom Mount Combination Transducer Features:
|
|
1st Watch Wireless Radar
Untether & Explore - Furuno 1st Watch Wireless Radar, that you can access directly from your iOS devices. Move Around & Explore With Furuno's 1st Watch Wireless Radar, you can do things previously impossible. You can bring the Radar display whenever you go, even put it on the iPhone in your pocket. Since the display is untethered, you are free to roam the vessel while maintaining full situational awareness of your surroundings. For example, you can bring the Radar display with you when jumping into the cabin quickly to grab fishing gear or other tools needed during your voyage. Easy To Use At 1st Glance Plug in the Radar, set up the free app from App Store and you're good to go. With familiar gestures it's a breeze to use; you can even use two iOS devices simultaneously. The app has been created with simplicity and efficiency in mind, providing reliable information that is easily accessible. Less Cables, More Flexibility Installation is simple with its compact and lightweight Radar antenna. Mount it, plug in the power cord and you're done. Due to the portability of the iOS devices this makes the system a good option for boats where space constrictions are of concern. Features:
Power Requirements:
*Please note: iOS devices and accessories are sold separately and do not come included with this product. |
Ultrasonic Weather Station
The 220WX Ultrasonic Weather Station detects instantaneous changes in the weather and provides essential weather readings with no moving parts, offering continuous operation even in adverse weather conditions. This all-in-one weather sensor measures apparent and true wind speed, and direction, air temperature and wind chill temperature. The 220WX also incorporates a 3-Axis solid-state compass and 3-Axis Rate Gyro for best-in-class compass and pitch/roll accuracy. The 220WX supports both CanBUS/NMEA2000® and NMEA 0183 and incorporates an NMEA 2000® port, and can be directly connected to a NavNet TZtouch/NavNet 3D DRS Radar sensor. Power for the 220WX is supplied from an NMEA 2000® bus. This unique feature allows for flexible installation of multiple NMEA 2000® sensors without the need to run cables all the way to the main processor unit. NMEA 2000r data is converted and distributed throughout the NavNet TZtouch/NavNet 3D Ethernet network. Standard 1" mount accommodates existing mounted hardware. The UV stabilized, compact housing is fully waterproof and resistant to both chemicals and sunlight. Features:
Sensor Functions:
|
30 Meter Cable Kit w/ Junction Box, FI5001
|
4kW 24" Dome f/1835 Radar Furuno's RSB0071-057A is a sleek 24" Radome with a 4.0kW transceiver. The RSB0071-057A is made specifically for Furuno's 1835 Radar |
4kW Gearbox for 1935 Radar Features:
|
Plastic Thru-Hull Transducer, 600w (10-Pin)
|
Bronze Thru-Hull, Low Profile, Transducer, 600w (10-Pin)
|
P79 Plastic In-Hull Transducer, 600w (10-Pin)
|
Plastic Thru-Hull, Low Profile, Transducer, 600w (10-Pin)
|
520T-BLD Bronze Thru-Hull Low Profile 600W - 10-Pin Airmar B117 Housing Style Transducer Features:
|
Plastic Transom Mount Transducer, 600w (10-Pin)
|
Plastic Transom Mount Multisensor, 600w (8-Pin)
|
Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (10-Pin)
|
600W Transom Mount Transducer
Features:
|
Bronze Thru-Hull Transducer w/ Temp, 600w (10-Pin)
|
Plastic Transom Mount Transducer w/ Temp, 600w (10-Pin)
|
B260 Bronze Broadband Thru-Hull Transducer with Temp, Built-in Diplexer and Hi-Speed Fairing Block, 1kW (10-Pin)
526T-HDD Bronze Thru-Hull Transducer with Broadband Technology
|
NMEA Cable, 1 x 6 Pin Connector, 5 Meters
|
6kW 24RPM Radar Gearbox
Furuno's 6kW 24RPM Gearbox for the FR8065. |
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |