Shop by Brand: PORTER-CABLE

Use for joints where strength is critical; biscuits swell in joints for maximum strength. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Use for joints where strength is critical; biscuits swell in joints for maximum strength. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Micrometer depth adjustor accurate to 1/128", cam lock lever enables simple coarse height adjustments and motor release (fixed base), dust sealed switch and sealed ball bearing construction, precision machined aluminum motor housing and base, auto release collet system for easy bit removal after use, collets included to accept 1/4" and 1/2" shank bits, under table stop, overmolded grips. Specs: 1-3/4 peak HP, 120V/AC, 25-60 Hz, 27,500RPM, 3-1/2" motor diameter, 1/4" & 1/2" collets, round base, LxWxH is 12 "x5.5"x8-5/8", weighs 8lbs. Includes: router motor, fixed base, 1/4" & 1/2" collets, (1) collet wrench, carrying case, operating manual. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Micrometer depth adjustor accurate to 1/128", Cam lock lever enables simple coarse height adjustments and motor release, precision machined aluminum motor housing and base, dust sealed switch and sealed ball bearing construction, auto release collet syste m allows for easy bit removal, collets included to accept 1/4" and 1/2" shank bits, Under table stop prevents motor from inadvertently rotating out of base, Overmolded grips for greater comfort. Specs: 120V/AC, 25-60Hz, 27,500RPM, 3-1/2" motor diameter, 1 /4" & 1/2" collets, 5-3/4" round base, LxWxH (12"x5.5"x8-5/8"), weighs 8lbs. Includes: router motor,1/4" & 1/2" collets, collet wrench, operating manual. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Includes 25 ft. nylon coil hose, 2 tapered nozzles, inflation needle, 1/4" tire chuck, hose adapter, 2 pc high flow inflator/deflator kit and teflon tape. Motor starts easily in cold weather or with extension cord. Spec: 150 PSI cut-out max, 120 PSI cut-i n restart, 3.0 SCFM air delivery at 40 PSI ISO1217, 2.0 SCFM air delivery at 90 PSI ISO1217, 1.5 gal tank size, 120 voltage, 10 amps, oil-free pump design, regulator and 2 gauges. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Made with aluminum oxide grain. Resin coated to resist heat and humidity for longer life. Fits: finish sanders, palm aanding blocks. Application: wood, metal, fiberglass, plastic & painted surfaces. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Porous polyethylene dust canister exceeds durability of cloth dust bags, rubber top grip for comfort, top cap design allows users to service or clean out the unit quickly, dual dust ports accept 1" and 1-1/2" vacuum hoses. Specs: 120V/60Hz, orbits/min 14, 000 OPM, 4-1/4"x4-1/2" pad size, paper size/type 1/4" sheet, orbit diameter: 1/16", 4.5"Lx12"Wx6"H, weight: 3.75 lbs. Includes: sander, paper punch, operating manual, carrying case. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Made with aluminum oxide grain. Resin coated to resist heat and humidity for longer life. Fits: finish sanders, palm aanding blocks. Application: wood, metal, fiberglass, plastic & painted surfaces. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Made with aluminum oxide grain. Resin coated to resist heat and humidity for longer life. Fits: finish sanders, palm aanding blocks. Application: wood, metal, fiberglass, plastic & painted surfaces. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Made with aluminum oxide grain. Resin coated to resist heat and humidity for longer life. Fits: finish sanders, palm aanding blocks. Application: wood, metal, fiberglass, plastic & painted surfaces. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Cut through drywall easily with this non-piloted, up-spiral bit for quick clearance of dust and a faster cutting action. Fits all cutout tools and rotary tools that accept 1/8-inch bits. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Foam pad with abrasive disc attached, used with No.7800 drywall sander (SKU 673.6730), 80 grit textured paint removal, wallpaper paste removal, 100 grit fast sanding and smoothing, 120 grit all-purpose applications, 150 grit final sanding and smoothing, 1 80 grit lightweight quick-dry drywall sanding and smoothing, paint conditioning, 220 grit light-weight quick-dry drywall sanding and smoothing, paint conditioning. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Powerful motor, vacuum delivers 99.85-percent filtration efficiency. On/Off switch for normal use, built-in power tool outlet that allows vacuum to start automatically when tool is turned on for dust collection. Includes 15-second vacuum overrun to clear hose when tool is turned off. Dual filtration system with washable automotive-type paper filter and 2-ply 8-gallon paper filter bag for dust pick-up. Corrosion-resistant polypropylene tank, flat top surface tray for holding tools while working, large whee ls and parking brake for easy maneuvering. 120-Volt, 25-60 Hz, 9-amp. Includes vacuum, 12 ft. hose, and operating manual. Rental. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Foam pad with abrasive disc attached, used with No.7800 drywall sander (SKU 673.6730), 80 grit textured paint removal, wallpaper paste removal, 100 grit fast sanding and smoothing, 120 grit all-purpose applications, 150 grit final sanding and smoothing, 1 80 grit lightweight quick-dry drywall sanding and smoothing, paint conditioning, 220 grit light-weight quick-dry drywall sanding and smoothing, paint conditioning. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Unit has 100 percent ball bearing construction, metal lower motor housing for heat dissipation, built in spindle lock and flat-top for one wrench bit changes, 1/4 inch collets, accepts router bits as well as laminate trimming bits. Precise bit depth adjus tments with Micro-set adjustment knob. Specs: 5.6 Amps, AC/DC, 30000 RPM, cast aluminum base. Includes: trimmer motor, base, collets wrench. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Foam pad with abrasive disc attached, used with No.7800 drywall sander (SKU 673.6730), 80 grit textured paint removal, wallpaper paste removal, 100 grit fast sanding and smoothing, 120 grit all-purpose applications, 150 grit final sanding and smoothing, 1 80 grit lightweight quick-dry drywall sanding and smoothing, paint conditioning, 220 grit light-weight quick-dry drywall sanding and smoothing, paint conditioning. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Oil-free pump design for reliability and no maintenance. Low amp motor starts easily in cold weather or with extension cord. Upgraded shroud, handle and console cover protect vital components, makes unit easier to carry and includes cord wrap. Two regulat ed, factory installed air couplers to easily support two users. Water drain valve and rubber feet. Specs: 120 volt, 150 PSI, 3.7 SCFM at 40 PSI and 2.6 SCFM at 90 PSI for fast recovery time. 34 lbs. tool weight. Includes: Compressor and operating manual.. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Spindle lock feature allows for single wrench bit changes. Kerf cut indicator aligns the blade to the indicator for accurate line cuts. Bevel adjustment allows for a variety of cutting applications and uses. Depth adjustment allows for cutting depth contr ol. Soft grips rear handle and boot minimizes vibration. Laser guide aligns the blade to the cut line. Ball bearing construction. Specs: 120 VAC, 25-60 HZ/120 VDC motor, 5,000 rpm, 1-13/16" capacity at 45-degree cut, 2-3/8" capacity at 90-degree cut, stan dard arbor and weighs 11.7 lbs. Includes 7-1/4" 24T carbide blade, wrench, rip fence, and storage case. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Strong and lightweight die cast aluminum body. Special hardened driver blade. Integrated rubber grip for improved comfort; adjustable belt hook and removable non-marring nose tip. Internal piston catch for consistent max power on every shot. Tool-free dep th of drive adjustment with detents for proper setting of nail heads. Specs: Firing Modes: Sequential Fire; Jam Clearance: Front Opening Quick Release Nose; Operating Pressure: 70-120 psi; Length: 11-1/2"; Height: 10-1/2"; Weight: 3-3/4lbs. Magazine Capac ity: 100 Nails; Fastener Specifications: Type: 16 Ga. Finish Nails; Range: 1" to 2-1/2"; Includes: Sample 16 Ga. Finish Nails; 1/4" Fitting, Safety Glasses, Carrying Case. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Quick-release nose piece for clearing of jams. Strong and lightweight die-cast aluminum body. Anodized magazine with visual reload indicator. Safety control located behind driver guide for driving brads in tight spaces. Depth adjustment for exact setting of nail head. Removable rubber nose protects delicate work. Directional exhaust port. Features driver 18 Ga brads, 1/4" male fitting, 5/8"-1-1/4" fasteners, front exhaust and oil. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Foam pad with abrasive disc attached, used with No.7800 drywall sander (SKU 673.6730), 80 grit textured paint removal, wallpaper paste removal, 100 grit fast sanding and smoothing, 120 grit all-purpose applications, 150 grit final sanding and smoothing, 1 80 grit lightweight quick-dry drywall sanding and smoothing, paint conditioning, 220 grit light-weight quick-dry drywall sanding and smoothing, paint conditioning. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Compact head size gets into tight spaces where a standard drill will not fit. Single sleeve chuck is easy to tighten and loosen for changing accessories. High speed for drilling and fastening and low speed for high torque applications. LED provides visibi lity in darkened work areas. Tool only. Will work with Lithium-Ion and/or NiCd batteries. Specs: 0-350/0-1,400 rpm, 1.3 AH and weighs 2.4 lbs. Includes double ended screwdriver bit. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Fully automatic status of charge indication for 18V Lithium-Ion or NiCd batteries. Illuminated LEDs show charge status: 1st LED on indicates low charge, 1 and 2nd LED on indicates partial charge and all 3 LEDs on indicates 75-percent plus charged. If no L EDs are visible the battery has a very low state of charge or no charge. Automatic shut off after 15 seconds reduces battery drain. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Slide style battery with up to 500 recharges; 1.5 Ah cells provide extended run time on each charge. Fits: PC418C-2, PC180HDK-2, and PC218C-2. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Drill/driver features an all metal 1/2" single sleeve chuck, high performance motor, 440 In lbs torque, 0-350 rpm speed applications, 0-1,400 rpm in high torque applications, 32 position clutch gives consistent torque control for driving various size scre ws and 2 speed gearbox for heavy-duty applications. Impact driver features 1,600 in-lbs high-torque output without kickback, quick-release 1/4" hex chuck, variable speed trigger for fast and smooth cutting, 0-2,900 rpm, 0-2,800 bpm and intergrated LED wor klight on drill illuminates darkened work areas. Includes (2) 18V NiCd batteries, 18V NiCd 1 hour charger, 18T carbide tipped blade, double-ended screwdriving bit and storage bag. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Drill/driver with 325 in-lbs max torque, 0-350/0-1,200 rpm, 1/2" chuck and weighs 3.8 lbs with PC18BLX battery. Impact driver with 1600 in-lbs max torque, 0-2900 rpm, 1/4" hex chuck and weighs 3.6 lbs with PC18BLX battery. Reciprocating saw with 3000 spm, 7/8" stroke length and weighs 5.2 lbs with PC18BLX battery. Flashlight with 5W bulb and weighs 1.8 lbs with PC18BLX battery. Includes PC18BLEX NiCad battery, PC18BLX NiCad battery, PCXMVC multi-chemistry charger, double-ended bit, PH #2 screw bit, recipr ocating saw blade and storage bag. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Variable speed control feature enables bit speed to be optimized for changing applications, plunge base features machined brass bushings and steel guide rods and through-the-column dust collection, durable latch lever, rack and pinion adjustment provides fine depth settings to 1/128" (fixed base only), depth rod with 6-position adjustable turret, dual position switch, overmolded grips, spindle lock, clear Lexan sub-base provides improved durability and bit visibility, sub base centering gauge, flat side o n plunge base, collets included to accept 1/4" & 1/2" shank bits. Specs: 120V/AC, 60Hz, no load speed 10,000-23,000RPM, 3-1/2" motor diamenter, 1/4" & 1/2" collets, base: (fixed) round and (plunge) round with one flat side, LxW (9"x6"), hei ght: (fixed-at zero) 9.9", tallest-11.1", (plunge-at zero) 10", tallest-12.2", weighs 13.5lbs Includes: router motor, fixed base, plunge base, 1/4" & 1/2" collets, sub-base centering gauge, collet wrench, carrying case, operating manual. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Variable speed control enables bit speed to be optimized for changing applications, rack and pinion adjustment provides fine depth, settings to 1/128", dual position switch allows user to cut power while maintaining control of the router, overmolded grips for greater comfort in extended use, spindle lock for single wrench bit changes, durable latch lever, collets included to accept 1/4" and 1/2" shank bits. Specs: 120V/AC, 60Hz, no load speed 10,000-23,000RPM, 3-1/2" motor diameter, 1/4" & 1/2" collets, r ound base, 9"l x6"w, height: At Zero-9.9", tallest-11.1", weighs 9lbs. Includes: router motor, fixed base, 1/4" & 1/2" collets, collet wrench, carrying case, operating manual. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Foam pad with abrasive disc attached, used with No.7800 drywall sander (SKU 673.6730), 80 grit textured paint removal, wallpaper paste removal, 100 grit fast sanding and smoothing, 120 grit all-purpose applications, 150 grit final sanding and smoothing, 1 80 grit lightweight quick-dry drywall sanding and smoothing, paint conditioning, 220 grit light-weight quick-dry drywall sanding and smoothing, paint conditioning. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Tapered tooth. High speed steel, 3/8" blade width. Rough wood cutting. Cutting depth: 1-1/2" for models 648, 7349, 7549 and 7649. 2-1/8" for model 548. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Bi-directional flush joint runs smoothly in both directions. Made with heavy-duty, X-weight cloth to resist tearing and stretching. Double resin system resists heat and humidity for longer life. Made with aluminum oxide grain. Application: Wood, Me tal, Fiberglass, Plastic, & Painted Surfaces. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies