Shop by Brand: IPS CORPORATION

| Bar to adapt double hole to single hole overflow plate

| With double cross bar stopper support | With 2.11" OD - 16 TPI | brass bushing adaptor | A) 2-3/4" B) 1-1/8" C) 1-5/8" D) 3/8" | Size 1-1/4" - 16 TPI | | Polished chrome finish

| With adjustable strainer | Gasketed (no caulk) for tile showers | Fits 2" IPS, C.I., PVC, ABS or steel (or inside 4" PVC pipe) | Furnished with snap-in stainless steel grate - will accommodate a screw-type grate | Finished with screw-on stainless steel strainer

| Eight - 1/2" Holes - 16 Gauge | Copper Plated For 1/2" Nominal Copper Sweat | 1-1/4" X 20"

Fits Over Dwv Pipe | Will Not Clog Or Fall Down In Pipe

Plastic test caps are more economical than mechanical or pneumatic plugs to temporarily seal DWV pipe ends. | Will not clog or fall into pipe | 2 In. PVC DWV | 100 bag count | Can be tested up to 40 Ft. of water

Fits Over Dwv Pipe | Will Not Clog Or Fall Down In Pipe

Fits Over Dwv Pipe | Will Not Clog Or Fall Down In Pipe

Cap Test Insert ABS 2"

Cap Test Insert ABS 3"

Cap Test Insert ABS 4"

| Fits Inside 3" Schedule 40 Dwv

| Fits Over 3" Pipe Fits Inside 4" Pipe | Without Pipe Stop | Pipe May Be Cut Flush To Floor | Mounting Slots On Four Sides For Precise Alignment | Four Countersunk Holes For Secure Attachment To Floor

Replaces Broken Cast Iron Closet Flanges | No Obstruction Of Bolts Creates Full Flow | Seals The Entire Length Of The Tailpiece Extension | Gasket Fits Service Weight, No-Hub Or Extra Heavy Weight Soil Pipe | Installs Easily Without Tools

| Less valves | 2" right and left drain couplings with knock out test caps | Prevents supply lines from crossing p-trap | Eliminates extra fittings, tubing, support framing and labor | Hot and cold supply designations embossed on front | Box: 8-1/4" x 6-1/8" x 3-3/4" | Frame: 10-3/16" x 8-13/16" | Interchangeable with standard washer box | Fits PVC or ABS Schedule 40 DMV | Top Mount drain option

| One piece design and raised drip guard contains and sends valve or washing machine hose leaks down the drain | Factory installed 1/4 turn valves | Various mounting options allow dual drain or right and left drain | Box can be inverted for top mount valve/center drain option | 2" right and left drain couplings with knock out test caps | Dual drain prevents supply lines from crossing p-trap | Interchangeable with box | Face plate included | IPS WATER TITE washing machine faceplace included

| One piece design and raised drip guard contains and sends valve or washing machine hose leaks down the drain | Factory installed 1/4 turn valves | Various mounting options allow dual drain or right and left drain | Box can be inverted for top mount valve/center drain option | 2" right and left drain couplings with knock out test caps | Dual drain prevents supply lines from crossing p-trap | Interchangeable with box | Face plate included | IPS WATER TITE washing machine faceplace included

| Adjustable stainless steel ring | One piece knockout will not fall down drain line | Molded-in test cap prevents damage during construction | Beveled hub allows for easier insertion into 4" pipe | Fits over 3" or inside 4" Sch. 40 DWV pipe

| Adjustable stainless steel ring | One piece knockout will not fall down drain line | Molded-in test cap prevents damage during construction | Beveled hub allows for easier insertion into 4" pipe | Fits over 3" or inside 4" Sch. 40 DWV pipe

| 360� Flexibility | Hub

One Piece Knockout Will Not Fall Down Drain Line | Molded-In Test Cap Prevents Damage During Construction | Beveled Hub Allows For Easier Insertion Into 4" Pipe | Fits Over 3" Or Inside 4" Sch. 40 Dwv Pipe

| 3" Full-Flow Throat Allows 3" Sphere To Pass | Keeps Drain Line Tight To The Subfloor | Spigot End Fits Inside 3" Sch. 40 Pipe | Strong, Corrosion Proof Stainless Steel Swivel Ring

With Metal Ring | Solvent Welds Inside Of 4" Or Over 3" Schedule 40 Dwv Pipe

One Piece Knockout Will Not Fall Down Drain Line | Molded-In Test Cap Prevents Damage During Construction | Beveled Hub Allows For Easier Insertion Into 4" Pipe | Fits Over 3" Or Inside 4" Sch. 40 Dwv Pipe

With Metal Ring | Hub

With Metal Ring | Hub

| Replaces broken cast iron closet flanges | No obstruction of bolts creates full flow | Seals the entire length of the tailpiece extension | Gasket fits service weight, no-hub or extra heavy weight soil pipe | Installs easily without tools and can be cut to length | No bolts to tighten

Economical, sturdy PVC plastic closet flange fits flush inside 4" schedule 40 DWV pipe, fits flush over 3" schedule 40 DWP pipe. Special "knockout" plug allows testing of drainage system without extra plugs or caps for the closet flange. Also prevents debris from entering the line during construction. Made in U.S.A.

| For Power and Communication Duct and Conduit Through 6" Diameter | Clear, Medium Bodied and Fast Setting | Pint

| For Power and Communication Duct and Conduit Through 6" Diameter | Clear, Medium Bodied and Fast Setting | Quart

| 1/4" To 4" Pipe Sealing Range | Numerous Applications | Molds To Metal, Plastic, Etc. | Non-Fading Epdm Collar