Shop by Brand: RIDGE TOOL COMPANY

| 40% Lighter Than Iron | Jaws and Internal Parts Identical To Ridgid Heavy Duty Iron Wrenches | Meets Federal Specification Ggg-W-651E

| 40% Lighter Than Iron | Jaws and Internal Parts Identical To Ridgid Heavy Duty Iron Wrenches | Meets Federal Specification Ggg-W-651E

| Precision designed for producing 45° flares with minimum effort on aluminum, brass, hard copper, soft copper and steel | Large feed screw handle turns easily | Hardened steel flaring cone | Cone rotates with an eccentric action producing a rolling action for even metal flow | Handle ratchets freely when flare is completed | Sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"

For Use On Polished Pipe and Tubing - Protects Nickel and Chrome Finish. Strong I-Beam Handle and Solid Head, All One Piece. Handy Hang-Up Hole. Easy To Attach and Use. Straps Are Easily Replaced...Easy To Use.

Spring-Loaded Jaws Of Forged Alloy Steel Provide Fast, One-Hand Ratcheting. Tension Plug Holds Head In Any Position Up To 90°Angle. Telescopic Shank Quickly Adjusts From 10" To 17".

| Extra Long Shank Protects Feed Screw Adjustment Threads | Strong Iron I-Beam Frame | Cutter Wheel Protected By Frame | Roll Housing Travels On Machined Ways To Provide Accurate Tracking | Pipe Capacity 1/8"—2"

| Holds 90' of 5/8" cable | Cable not included

Rear guide hose for K-50 sectional machine | 6'

Cable carrier | 60' | Capacity 1-1/4"

| Model A-17-B | Adapter kit for K-50 Sectional machine | Includes 35 ft. x 3/8 in. cable with bulb auger

| Wide Spring Wrench Opens To Next Largest Standard Size (6" Wide Opening Has A Maximum Opening Equal To That Of A Standard 8") | Cobalt Plated Finish To Reduce Rust and Corrosion

| Wide Spring Wrench Opens To Next Largest Standard Size (6" Wide Opening Has A Maximum Opening Equal To That Of A Standard 8") | Cobalt Plated Finish To Reduce Rust and Corrosion

| Wide Spring Wrench Opens To Next Largest Standard Size (6" Wide Opening Has A Maximum Opening Equal To That Of A Standard 8") | Cobalt Plated Finish To Reduce Rust and Corrosion

| Wide Spring Wrench Opens To Next Largest Standard Size (6" Wide Opening Has A Maximum Opening Equal To That Of A Standard 8") | Cobalt Plated Finish To Reduce Rust and Corrosion

| 40% Lighter Than Iron | Jaws and Internal Parts Identical To Ridgid Heavy Duty Iron Wrenches | Meets Federal Specification Ggg-W-651E

| 40% Lighter Than Iron | Jaws and Internal Parts Identical To Ridgid Heavy Duty Iron Wrenches | Meets Federal Specification Ggg-W-651E

| 40% Lighter Than Iron | Jaws and Internal Parts Identical To Ridgid Heavy Duty Iron Wrenches | Meets Federal Specification Ggg-W-651E

Replacement cable for K-30 sink machine

| Rugged Cast Iron Base | Hardened Alloy Steel Jaws | Handy Pipe Rest and Bender | Free Floating Chain Provides For Fast Securing Of Pipe | Pipe Capacity 1/8"—2-1/2"

Sink/sectional cable | With bulb auger and inner core | 5/16" x 25'

Drum cable | Integral wound | 1/2" x 75'

Sink/sectional cable | With male coupling | 3/8" x 35'

| For Model K-50 Series & other cables | 3/8" x 25'

* Fits C-4,C-6,C-7,C-8,C-31,C-32,C-33

| For Hard and Soft Copper, Aluminum and Brass | Strong Metal Frame and Wheel Housing | Large Knurled Feed Screw Knob Gives Control | #813115 Has Spare Cutter Wheel In Knob and Grooved Rolls For Close-To-Flare Cuts

| Fold-Away Reamer | Zinc Frame, Large Rolls Give Accurate Tracking | Clean, Square Cuts On Copper, Brass, Aluminum and Thin Wall Conduit | Pipe Capacity 3/16"—1-1/8"

| Enclosed feed screw to eliminate clogging and jamming | Grooved rolls for close-to-flare cuts and a fold-away reamer | Strong zinc frame | Spare cutter wheel in handle | Cuts copper, brass and aluminum tubing and thin wall conduit | Pipe capacity 1/8"—1-1/8"

| Precision designed for producing 45° flares in soft copper, brass, aluminum and mild steel tubing | Hardened steel flaring cone | Single clamp screw provides for easy clamping and removal of tubing | Sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"

| For Npt Threads | 1 Set Per Card

| For Npt Threads | 1 Set Per Card

| Extra Long Shank Protects Feed Screw Adjustment Threads | Strong Iron I-Beam Frame | Cutter Wheel Protected By Frame | Roll Housing Travels On Machined Ways To Provide Accurate Tracking | Pipe Capacity 1/8"—2"