Lightweight and easy to operate with handle exhaust and oil bath lubrication. Full power in reverse. 3-position adjustable power in forward. Integral 360-degree swivel inlet. Specs: 1,100 ft.-lbs. of max torque. 200-900 ft.-lbs. working torque, 1,200 BPM, 5,500 RPM, 9.5 CFM, 38 CFM at load, 98.1/109.1dBA. 12.4 lbs. tool weight. 9" tool length. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Twin Hammer impact mechanism and forward/reverse power regulator. Comfortable vibration-absorbing grip. Specs: 6-vane motor, 1/2", 8,000 RPM, 500 ft/lbs.max torque, 5 CFM at 90 PSI. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Powerful 3/8" pistol grip drive impact wrench. 180 ft-lb maximum torque. Consistent torque, even with air pressure changes. More torqe with less vibration. Lightweight and compact. Built-in power regulator helps control torque. Jumbo hammer impact mechani sm. Pressure feed lubrication system. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

M18 FUEL 1/2" IMPACT WRENCH KIT High torque impact wrench delivers 1,000 ft.lb.- fastening torque, 1400 ft-lb. nut-busting torque Has 4-mode drive control with bolt removal mode 0 to 550/1,400/1,750/1,750-750 RPM 0 to 950/1,750/2,100/2,100 impact per minute Compact size: 8.39"L - 10.75"H - 3.15"W - 7.5 lb With socket friction ring and LED light Has REDLINK Plus to prevent overloading 2767-22 M18 1/2 IMPACT WRENCH SIZE:18 Volt COLOR:RedIncludes tool, (2) M18 REDLITHIUM XC5.0 -Extended Capacity batteries, M18/M12 -Rapid Charger and storage case

Pin-detent system to securely retain sockets or adapters, and AC-only variable speed reversing switch with speed setting dial, ergonomically shaped handle with a soft cushioned grip, light weight. Specs: 120AC, anvil 1/2" pin detent, 300 ft/lbs peak tor que, no load RPM is 600-1,800, no load IMP is 1,000-2,600, trigger switch, soft grip, socket retention flat end detent pin, 10 ft. Quik-Lok2-wire cord, 11-5/8” long, weighs 6.0lbs. Includes: carrying case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

1/2" SUPER DUTY AIR IMPACT WRENCH Wilmar's most powerful 1/2" drive impact wrench Built-in air regulator 420 ft./lbs. of torque Adjustable power regulator with 6 torque - setting for precise speed & power control Contoured handle and well balanced design M625 1/2 HD IMPACT WRENCH SIZE:1/2"

As close as you can get to the real racing tools. Delivers power, speed, and durability for shop tasks. Specs: 625 ft.-lbs. of torque in reverse, with 10,000 rpm. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Uniden UPP120BK Jump Starter - 12000mAh Power Pack with AIR PUMP/2-1 USB Cable Universal 12V Clamps Supports Engines <5.0L (<3.0L Diesel) Resting Discharge Loss 12%/year AC & DC Chargers Carrying Case Includes: Compact Air Pump 80PSI Gauge On/Off Switch Rapid-Discharge Power Connector Sport Needle & Small Inflation Adapter This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

1/2" COMPOSITE IMPACT WRENCH Powerful twin hammer clutch 230 ft./lbs. of torque - 1089 BPM Composite housing - combination of PVC and aluminum is compact, lightweight & durable Variable speed with two forward speeds and - one reverse Weighs just over 3 lb. M624 1/2 IN. IMPACT WRENCH SIZE:1/2" COLOR:Black

M18 FUEL 3/8" COMPACT IMPACT WRENCH W/ FRICTION RING Delivers up to 210 ft-lbs of torque POWERSTATE brushless motor provides up to 20% - more run-time than leading competitors 4-Mode DRIVE CONTROL gives greater control over- output: Mode 1 0-900 RPM, Mode 0-1600 RPM, - Mode 3 0-2500 RPM, and Auto Shut-Off mode - detects when tool has impacted on a fastener & - automatically shuts the tool down 2754-20 M18 3/8 IMPACT WRENCH SIZE:3/8" COLOR:Red/BlackBare: Tool Only

Non-biased motor delivers 1,050 ft-lb (1424 Nm) of maximum torque in both forward and reverse. Rocking dog impact mechanism works well on a wide range of air pressures. Two power settings in both forward and reverse. Variable speed trigger offers impressi ve control. Handle-vented exhaust directs air away from the operator. Silenced exhaust reduces tool noise while in use. Ergonomic design for improved tool handling. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

This item cannot be shipped to APO/FPO addresses. Please accept our apologies

M18 FUEL 1/2" COMPACT IMPACT WRENCH W/ PIN DETENT Delivers up to 220 ft-lbs of torque POWERSTATE brushless motor provides up to 25% - more run-time than leading competitors 4-Mode DRIVE CONTROL gives greater control over- output: Mode 1 0-900 RPM, Mode 0-1600 RPM, - Mode 3 0-2500 RPM, and Auto Shut-Off mode - detects when tool has impacted on a fastener & - automatically shuts the tool down 2755-20 M18 1/2 IMPACT WRENCH SIZE:1/2" COLOR:Red/BlackBare: Tool Only

1/2" DRIVE AIR IMPACT WRENCH Pistol grip 1/2" drive air impact wrench 230 ft./lbs torque, 4 CFM, 90 PSI Built-in air regulator 7,200 RPM free speed Well balanced design with push button direction- change for quick & easy operation Rocking dog clutch for optimal engagement M558DB 1/2 DRIVE IMPACT WRENCH SIZE:1/2"

This item cannot be shipped to APO/FPO addresses. Please accept our apologies

| Durable, quality tools that can withstand frequent and rigorous applications, the R6 Series can handle 6 hour workdays and get the job done | Single Hammer impact mechanism for smooth power and torque | Compact design for cramped spaces | Variable-speed throttle lets you adjust speed smoothly | Lightweight aluminum construction reduces weight | 360° swivel brass air inlet | Built-in multi-position regulator | Air Pressure (PSI): 90 | Free Speed (RPM): 12,000 | Max Torque (Ft.- Lbs.): 75 | Air Inlet (NPT/In.): 1/4 | Overall Length (In.): 5-7/8 | Square Drive (In.): 3/8 | Bolt Capacity (In.): 3/8 | Anvil Retainer Type: Ring | Vibration Value (M/S2): 13.4 | Air Consumption (CFM): 3 | Working Torque (Ft.) (Lbs.): 5-50 | Noise Level (DB): 114 | Air Hose (ID/In.): 3/8

Variable reversible speed with aluminum housing, a working torque of 25-200 (ft.-lb.) and a max. torque of 450 (ft.-lbs.), ergonomic grip and handle exhaust. Specs: drive is 1/2" (square), no load speed is 8,000 RPM, average air consumption (CFM) is 4.3, CFM at Load 24, inlet size is 1/4", min. hose size is 3/8", noise level is 90.3 db, weighs (lbs.) 5.3 lbs and is 7 1/8" long. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Continuously refined. Offers the sheer power and performance features to tackle the toughest jobs with ease. Durable and economical. Adjustable power regulator. Pressure feed lubrication. Easy to service two piece construction. 600 ft./lbs of torque and provides 8,000 rpm (1,2000bpm) to deliver fast, efficient performance. Contoured handle for comfort and control. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Delivers incredible performance and industrial grade durability in an impact wrench. Efficient air consumption to save you money. 1,350 ft-lb max reverse torque is compact to access tight spaces. Built to last and designed to withstand tough use in rugged environments. Easy to clean inlet screen means less downtime and better tool performance. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Combines power, control and durability. Delivers 1,770 ft-lb (2,400 Nm) of maximum torque, with a 5,250 rpm free speed at 120 psi (8.3 bar) and features a high efficiency 6-vane motor. The integral 360 degree swivel inlet makes kinked hoses a thing of the past. The swept-back handle provides ideal maneuverability, with an available 6" extended anvil for even more accessibility. Improved feather touch trigger. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Allows greater access to tight spaces, while the minimal weight (2-1/2 lbs) reduce operator fatigue. Hard coat anodized end plate stands up to tough jobs. 4 position power regulator dial for max control. Improved grease fitting for easy maintenance. One h and forward/reverse for easy operation with 300 ft-lbs max power. 7-vane motor for more power. Ergonomic housing offers greater operator comfort. Feather touch trigger enables impressive control. Optimized air flow ensures maximum performance. Quiet tool technology reduces sound levels without compromising power performance. This item cannot be shipped to APO/FPO addresses. Please accept our apologies