1/2" VSR DRILL 7.8 Amp - 0-850 rpm variable speed drill Helical-cut- steel, heat-treated gears Metal gear housing for jobsite durability Two-finger trigger for increased comfort 360 deg. side handle for greater control Includes 1/2" keyed chuck with key & holder DW235G HD 1/2 IN. VSR DRILL

Drill has variable speed, reversing, built in LED light illuminates drilling edge and increases visibility with a bulb that never needs replacing, two modes, hammering with rotation and rotation only, positive stop mode selector prevents accidental mode d isengagement, built in torque limiter, large trigger switch and 360 degree swivel side handle, recessed lock-on button, ball bearing construction, ergonomic shape with rubberized grip, air vent holes supply required ventilation. Specs: capacities in: conc rete-3/4", steel (low) 1/2" (high) 5/16", wood-1-9/16", no load RPM (low) 0-1,200 (high) 0-2,900, BPM (low) 0-24,000 (high) 0-58,000, 14-1/4' long, weighs 5.6lbs. Includes: side handle, depth gauge, chuck key, tool case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Two operating speeds with a clutch in the low gear range, speed shifting is easy, easy turn gear shift knob, comfort grip handle features 3 positions with 90 degree left-right rotation for maximum operator comfort for all applications. Specs: 120A, no loa d RPM is 450/1,750, low speed clutch, capacity in: wood (self-feed bit)-4-5/8", (hole saw)-6", metal (twist bit)-1/2", spindle 5/8 in.-16, triple gear train, 8 ft. fixed cord, grounded, 22" long, weighs 14.7lbs. Includes: side handle. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

SDS Plus quick-set bit system replaces bits quick and easy, electronic variable speed control, push button reversing switch, mode selector with 2-modes of operation, hammer/drill and drill only, lock-on speed button, removable side handle, pistol grip han dle. Specs: 800 Watts, capacities in: concrete: 15/16", core bit 2", steel-1/2", wood-1-1/4", impact energy is 2.5./lbs., impacts/minute 0-4,600 IPM (full load), no load RPM is 0-1,050, 13.81" long, weighs 5lbs. Includes: (1) rotary hammer, (1) 360 degree auxiliary handle, (1) depth gauge, (1) carrying case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Compact, easy use between framing studs or any other close quarter application with variable speed for controlled drilling in wood/metal and speedy fastening, built in shock proof, high output, white LED light illuminates drilling area with a bulb that ne ver needs replacing throughout the life of the tool, paddle switch with speed limiting dial, reduced head height, ball bearing construction. Specs: capacity in: wood-13/16", steel-3/8", no load RPM is 0-2,400, 10-5/8" long, weighs 3.1lbs. Includes: grip c omplete, chuck key, key holder. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Compact and lightweight hammer drill with variable speed control dial, push button reverse switch, one-piece cylindrical housing and aluminum die-cast inner cover and gear cover, oversize trigger switch, elastomer, non-slip grip, removable side handle, 1- 1/16" center height that allows better reach into narrow work spaces. Specs: rated power input-590W,0.80HP, rated power output-310W, 0.42HP, max.power output- 650W, 0.88HP, no load speed 0-2,900/min, no load impact rate 0-46,400/BPM, 111.6in/lbs max. tor que, capacity in: concrete-5/8", wood-1", steel 1/2", 10-19/32" long, weighs 3.7lbs. Includes: side handle, depth gauge, injection molded plastic case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Features ariable speed reversing switch on two finger trigger and lock-on button, ergonomic handle with soft grip, precision cut steel gears, magnesium front housing for increased durability and 360 degree auxiliary handle with optional depth gauge. Specs : max. hole diameter in: steel: (hole saw) 2", (twist drill bit) 1/2", wood: (auger bit) 1-3/8", (hole saw) 3-5/8", (paddle bit) 1-1/2", (self feed bit) 2-1/4", 0-850 rpm no load speed, 8ft rubber cord, 3-prong grounded plug, 120 V AC rating, 1/2"-20" spi ndle, 373 in lbs torque and weighs 5.1 lbs. Includes auxiliary handle and chuck key. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Features an all ball bearing motor, heavy duty chuck, two finger trigger, lock-on button, ergonomic handle with soft grip, precision cut steel gears, magnesium front housing, extra long 8ft. rubber cord with 3-prong grounded plug and 360 degree auxiliary handle with optional depth gauge. Specs: Max. Hole Diameter: in Steel-Hole Saw: 3", in Steel-Twist Drill Bit: 1/2", in Wood-Auger Bit: 1-1/2", in Wood-Hole Saw: 4-1/2", in Wood-Paddle Bit: 1-1/2", in Wood-Self Feed Bit: 2-9/16", 120 Volt rating, 0-550 rp m no load, 1/2"- 20" spindle, 767in lbs torque and weighs 5.3 lbs. Includes auxiliary handle and chuck key. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Dual speed range delivers optimal performance. High performance frameless motor delivers maximum power of 200 unit watts out. LED work light provides increased visibility in confined spaces. Compact size and lightweight design allows users to fit into tig ht spaces. Ratcheting chuck reduces bit slippage. Specs: 2 speed settings, 0-400/0-1,450 max rpm, 17 clutch settings and weighs 3.8 lbs. Includes two 12V batteries, 1 hour charger, screwdriver bit and heavy-duty kit box. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

All metal gear case and diaphragm. 360-degree locking side handle. All metal Grip-Lok, 2-sleeve keyless metal chuck. Ergonomic tactile soft grip and 2-finger trigger. Specs: 0-2500 rpm no load speed, capacity in: wood (flat boring bit) 1-1/2", wood (hole saw) 2-1/4", metal (twist bit) 1/2", 3/8in.-24 spindle, double gear train, 10' fixed 2-wire rubber cord, double insulated and weighs 4.1 lbs. Includes side handle. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Variable speed control, ergonomic tactile grip and two finger trigger, ramp off depth locator for easy depth adjustments, all metal gear case and diaphragm, removable belt clip with bit storage, soft grip handle. Specs: 120AC, no loadRPM is 0-4,000, Snap- Action clutch, 1/4" hex drive, max HP 0.9, 10 ft. 2-wire rubber, fixed cord, double insulated, trigger lock, 0.92" spindle offset, 12-3/4" long, weighs 3.5lbs. U.L. Listed. Rental. Includes: belt clip. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Variable speed control, ergonomic tactile grip and two finger trigger for user comfort and balance, ramp off depth locator for easy depth adjustments, all metal gear case and diaphragm, removable belt clip with bit storage, used for controlled depth faste ning. Specs: 120AC, no load RPM is 0-2,500, Snap-Action clutch, 1/4" hex drive, max HP is 0.9, double insulated, switch trigger type, trigger lock, soft grip handle, spindle offset 0.92 in., fixed 10 ft. 2-wire rubber cord, 12-1/8" long, weighs 3.7 lbs. UL listed. Includes: belt clip. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Variable speed reversing, two-finger, rubber trigger for increased comfort, heat-treated steel gears for long life and durability, high torque for deck building, drywall and heavy gauge steel stud framing, depth sensitive nosepiece for consistent fastener depth, excellent ergonomics. Specs: no load speed 0-2,500RPM ,standard clutch, 132 in/bs torque, max fastener size #12, weighs 3.5lbs. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Features an all metal gear case and diaphragm, heavy-duty chuck, 360-degree locking side handle, ergonomic textured grip and two finger trigger for user comfort and balance. Specs: 120V AC, 0-850 rpm no load speed, drilling capacity in: wood (auger bit)- 1-1/2", wood (self-feed bit)- 2-9/16", metal (hole saw)- 2", 1/2in-20 spindle, double gear train, 8 ft. fixed 3-wire rubber cord and weighs 5.4 lb. Includes side handle and chuck key with holder. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Powerful, yet compact for large hole drilling between joists and studs, two speed ranges increase the versatility of this drill, hi-torque and hi-speed for the heavy duty user with an extra long pipe handle that helps you control the power. Specs: 120AC, no load RPM is 300/1,200, capacity in: wood-(auger bit)-1-1/2", (self-feed bit)-4-5/8", metal (twist bit)-1/2", spindles 5/8"-16, triple gear train, 8 ft. fixed cord, grounded, weighs 11.5lbs. Includes: pipe handle. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Features variable speed /reversing for drilling in a wide variety of materials, low decibel rating (79dB). in-line handle, large recessed lock-on button, all-ball bearing construction and large trigger switch. Specs: 0-2,500 rpm no load speed, capacity in : steel- 3/8", wood- 1" and weighs 3.1 lbs. Includes keyless chuck and plastic tool case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Two speed selector switch, high and low, torque limiter disengages motor should the bit bind (low speed only), supporting side handle with hex wrench storage, adjustable top handle with hex wrench storage, ergonomically designed rubberized grip, plastic t ool case fits tool even with attached bit. Specs: capacity in: steel-1/2", wood-4-5/8", no load speed 300RPM (low), 1,200RPM (high), 18-1/4" long, weighs 12.3lbs. Includes: chuck key, key holder, drill chuck, hex wrench, side handle grip, plastic tool cas e. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Features variable speed reversing dial located in switch, lightweight, compact, maximum torque of 108.1 in-lbs, form fit palm grip with minimal vibration. Specs: 0-2,500 rpm no load speed, 108.1 in-lbs maximum torque, cut capacity in: wood 1", steel 3/8" and weighs 3.1 lbs. Includes injection molded plastic carrying case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Drill has variable speed reversing and is made from helical-cut steel with heat-treated steel gears for long life and durability, metal gear housing for jobsite durability and increased reliability, two-finger, rubber trigger for increased comfort, triple gear reduction, 360 degree side handle. Specs: 0-600rpm no load speed, max watts out 600W, capacity in wood (spade bit) 1-1/2", (hole saw) 4", (self-feed) 2-9/16", (auger bit) 1-1/2", capacity in steel (twist bit) 1/2", (hole saw) 2-3/4", triple gear red uction, handle style pistol grip, weighs 4.4lbs. Includes: 360 degree side handle, chuck key with holder This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Features variable speed, reversing with dual range speed control, hammer with rotation or rotation only, removable side handle and self-stop brush system. Specs: 120 AC, 0-1,350/0-2,500rpm no load, 0-20,000/0-40,000 bpm no load, capacities in: concrete- 3/4", metal/twist bit- 1/2", wood- 3-3/4", self-feed bit capacity- 1-3/4", 10ft. fixed cord, trigger lock and weighs 6.0lbs. Includes side handle, depth gauge and chuck key. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Features variable speed reversing switch avoids air bubbles when mixing mud and offers greater control when drilling. Specs: 600 watts max power output, 0-550 rpm no-load speed, triple gear reduction, drilling capacity in: wood (spade bit) 1-1/2", wood (s elf-feed) 2-9/16", wood (hole saw) 5", wood (auger bit) 1-1/2", steel (twist bit) 1/2", steel (hole saw) 3" and weighs 7.5 lbs. Includes 3 position side handle, 2-position rear spade handle chuck key and holder. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

For drilling holes through and driving large fasteners in wood, metal and plastic. Features variable speed reversing, all metal gear housing, reversing brush system and 360 degree side handle. Specs: 0-900 rpm, capacity in: steel- 1/2", wood- 1-1/2". Incl udes side handle, chuck key and holder. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Variable speed with extended run time batteries provide long run-time and battery life, high power, high efficiency motor delivers max power for superior performance in all drilling and fastening applications, 3-speed all-metal transmission matches the to ol to task for fastest application speed and improved run time, heavy duty self-tightening chuck tightens throughout operation providing superior bit gripping strength, LED worklight provides increased visibility in confined spaces. Specs: 18V, 450UWO ma x power, 3 speed settings, Max RPM 0-500/0-1,250/0-2,000, Max BPM 0-8,500/0-21,250/0-34,000, 22 clutch settings, self tightening 1/2" metal chuck, weighs 6.25lbs. Includes: (1) one hour charger, (2) 18V XRP batteries, 360 degree side handle . kit box. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Two speed 1/2" driver/drill (0-400/0-1,500 RPM) with 4-pole motor delivers 450 in.lbs. of max torque and weighs only 3.5 lbs., variable speed impact driver (0-2,300 RPM) provides 1,280 in/lbs. of max torque and weighs only 2.9 lbs., 4-position flashlight with Xenon bulb runs over 2 hours per charge. Includes: 3 tools, (2) 18V compact Lithium-Ion batteries, (1) 15-minute rapid optimum charger, (1) contractor bag. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

High power, high efficiency motor with variable speed reversing delivers max power in all drilling and fastening applications, exclusive lithium ion cells offer long battery life and durability with 2,000 recharges, 3-speed all metal transmission matches the speed to the application for optimal performance, heavy duty self tightening chuck provides superior bit gripping strength, anti slip comfort grip provides increased comfort and control. Specs: 36V, 750UWO max power, 3 speed settings, 0-400/0-1,200/0- 1,600 Max RPM, 0-6,800/0-20,400/0-27,200 max BPM, 22 clutch settings, self tightening 1/2" metal chuck, weighs 6.75lbs. Includes: (1) one hour charger, (2) 36V li-Ion batteries, 360 degree side handle, kit box. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Lightweight, all ball bearing construction for longer tool life with two modes of operation, hammering with rotation and rotation only, ergonomic handle with rubberized soft grip, extended service life of carbon brushes, recessed lock on button for contin uous use. Specs: capacities in: concrete-5/8", steel 1/2", wood-1-3/16", no load RPM 0-2,800, BPM 0-44,800, 11-7/8" long, weighs 4.3lbs. Includes: side handle, depth gauge, keyless drill chuck, plastic case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Features a heavy duty, single sleeve ratcheting chuck for tighter bit gripping ability, dual speed range that delivers maximum versatility, adjustable clutch offers maximum versatility and control. Compact size and lightweight allows users to get into tig ht spaces when performing applications. Specs: rubber grip, 130UWO max power, 0-300/0-1,100 max rpm, 15 clutch settings and weighs 3.4lbs. Includes one hour charger, screwdriver bit, two 9.6V batteries and kit box. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Variable speed/reversing switch, soft grip handle, reversing brush system and mid-handle design for balance and comfort, ROC hammer technology for high speed masonry drilling, hammer drill or drill mode for masonry, wood or steel drilling, two speed selec tor, metal gear housing, 360-degree side handle with depth rod. Specs: 0-1,000 and 0-3,000 RPM, 51,000 BPM, cutting capacity: steel- 1/2", 1-1/4 "- wood, 1/2" -concrete. Includes: (1) chuck key & holder, side handle, depth rod, kit box. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Reversible, variable speed. Retractable belt clip, ergonomic rubberized grips, large trigger switch, comfortable side handle rotates 360 degrees, all ball and needle bearing construction, brushes are easily accessible, double insulated. Specs: capacity in : steel 1/2", wood 1-1/2"; 0-900 RPM no load speed, weighs 4.8 lbs. Includes: chuck key, side handle. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Titanium coating reduces friction and increases drill speeds in metal. Split point penetrates on contact, preventing walking of drill bit. Compatible with the UltraLok connector and standard drive drills. Includes: (1) Compact Quad Driver, (1) One Hex to square adapter (1/4" to 1/4"), (1) #8 countersink insert, (3) titanium drill bits 1/8", 3/16" and 1/4", (1) 1" P2 driver bit, (4) magnetic nutsetters 1/4", 5/16", 3/8" and case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies

Motor provides overload protection. Metal gear case can withstand daily jobsite abuse. Lightweight balanced design reduces operator fatigue. Dual speed motor optimized for concrete fastening. Specs: 120 AC, 0-16,000/0-40,000 bpm no load, 0-1,000/0-2,500 r pm no load speed, capacity in: steel- 1/2", concrete- 3/4", 10 ft. Quik-Lok cord, and weighs 6.4 lbs. Includes side handle, depth gauge, chuck key and carrying case. This item cannot be shipped to APO/FPO addresses. Please accept our apologies